Maf pipes

critical · 02-10-2014, 11:32 PM

let's see your log from december 30th from around 19:00

you should follow your own advice:

Quote:

Originally Posted by luigi90210

i thought about making my own post MAF tube once, but then i realized it would be easier to buy them

honestly unless you were doing LTI, id stick to the stock airbox with drop in filters and post MAF tubes

luigi90210 · 02-11-2014, 12:36 AM

Quote:

Originally Posted by critical

let's see your log from december 30th from around 19:00

you should follow your own advice:

and when did i post that? i can tell you that was months before i saw someone actually dyno that set up, hate to break it to you but people's opinions change and i feel that mod is stupid and a waste of money for a gain of 3whp over their a full FI Exhaust, at least now i do

also i dont have a log on that day, i dont run torque all the time but here is a log from DEC 26

the highest IAT i saw was 24C which is 75F and i saw as low as 57F(14C), not bad imo for something that sucks in 200+ engine bay temps all the time

Zippyshare.com

megalapagas · 02-11-2014, 12:52 AM

Quote:

Originally Posted by luigi90210

yep, it was the filter i was using, i moved from a pod filter to a cone filter, i think it was because there was no opening in the top of the filter where the air gets rammed into it was left to suck in hot engine air

i did take the intakes off for a period of time but than randomly i decided to buy 2 cone style filters(specter air filters at orileys) and put the intakes back on, it made a world of difference

the most i have seen is 130 IATs and that was literally in dead stop for 30 mins cause CHP had shut down the highway temporarily cause of an accident(thankfully it wasnt long)

ill wait until summer to see what IATs are then but right now my IATs are the same as the stock box from what i logged and im extremely happy with the intakes, although i do plan on extending them using similar parts Synolimit(only difference is it being in bigger size) used so i can have a true cold air intake until i supercharge

INTERESTING you say this as I too bought the spectre filter but it didn't fit my Ram Air Tubes because filter was too big....I'm curious to know how you fitted it?

luigi90210 · 02-11-2014, 01:02 AM

Quote:

Originally Posted by megalapagas

INTERESTING you say this as I too bought the spectre filter but it didn't fit my Ram Air Tubes because filter was too big....I'm curious to know how you fitted it?

what was your piping size? my intake piping size is 2.75in with it tapering down to 2.5in at the MAF, i bought a 3in filter but since it was only .25in off it fit just fine, no leaks or what not

if your intake piping is 2.5in or within .25in smaller of it, you want to get their 2.5in filter

critical · 02-11-2014, 01:10 AM

Quote:

Originally Posted by luigi90210

and when did i post that? i can tell you that was months before i saw someone actually dyno that set up, hate to break it to you but people's opinions change and i feel that mod is stupid and a waste of money for a gain of 3whp over their a full FI Exhaust, at least now i do

also i dont have a log on that day, i dont run torque all the time but here is a log from DEC 26

the highest IAT i saw was 24C which is 75F and i saw as low as 57F(14C), not bad imo for something that sucks in 200+ engine bay temps all the time

Zippyshare.com

you were driving 100mph at 2k RPM's and you're still not even at ambient temps? this is a really bad example.

megalapagas · 02-11-2014, 01:15 AM

I will check the pipe size I have it stored in a storage on the other side of town lmao I just said "Screw you RamAir and rust for all I care" Lmfao bad experiences man, not bashing the ram air, but I was left over heated in a part of my county that is close to mexico soooo yeaaaa NO BUENO that day....

luigi90210 · 02-11-2014, 01:20 AM

Quote:

Originally Posted by critical

you were driving 100mph at 2k RPM's and you're still not even at ambient temps? this is a really bad example.

thats 100kph or 60mph(was still fixing some of bugs with the app not uploading the proper measurements), at 100mph id be well above 3k in 6th

stock boxes dont get to ambient temps anyways, the most they are at are 8 above from what i saw from previous logs

like i said, im seeing the same data as stock boxes but the butt dyno says there is more power, i definitely noticed a difference in torque

http://www10.zippyshare.com/v/87060050/file.html
there is a log from the DEC 5, stock boxes and this was when it was close to 37 out iirc and the lowest i see is 11C(51F)

Chuck33079 · 02-11-2014, 07:12 AM

Quote:

Originally Posted by luigi90210

I'Seriously I saw a dyno on a 370z Facebook page with drop ins and HPS tubes that gave 3whp over his FI exhaust setup with stock intakes.

IMO not worth the $200 someone will spend on drop ins and silicone tubes.

K&N Air Filters Added to Stock Air Boxes??

Shows quite a bit more than a 3 whp increase here.

luigi90210 · 02-11-2014, 10:44 AM

Quote:

Originally Posted by Chuck33079

K&N Air Filters Added to Stock Air Boxes??

Shows quite a bit more than a 3 whp increase here.

Iirc those dynos are from a couple years ago and they are on a stock 370z, as you can tell from the dyno, heck I think they are from the original maf tube and drop ins thread.

What would be interesting to see is maf tubes over stock intakes on a car with other mods and than see the dyno. I doubt anyone will see more than 5whp on top of their current setup and that's being very optimistic(and even than 5whp is is like changing from a dirty filter to a clean one)

SouthArk370Z · 02-11-2014, 11:37 AM

Quote:

Originally Posted by Jimbo370

Has anyone dynoed to see if silicone piping really makes a difference. Are these worth paying $100 for. THANKS.
09-11 Nissan 370Z 3.7L VQ37VHR HPS Silicone Post MAF Air Intake Hose Red 10 : Amazon.com : Automotive

For a DD, probably not worth the cost for a very few more HP. But it's an easy mod and, if you like the look, why not?

Personally, I'd put the money toward an exhaust. You won't gain a lot of HP that way either, but it will sound better.

You're not going to see much in the way of gains with cheap, easy solutions. Nissan has already picked all the low-hanging fruit.

luigi90210 · 02-11-2014, 02:56 PM

Quote:

Originally Posted by megalapagas

I will check the pipe size I have it stored in a storage on the other side of town lmao I just said "Screw you RamAir and rust for all I care" Lmfao bad experiences man, not bashing the ram air, but I was left over heated in a part of my county that is close to mexico soooo yeaaaa NO BUENO that day....

ya when i had the K&N pod filters on there i was running into problems with acceleration, heat soak, ect.

i dont know what caused me to put the intakes back on my car with a different filter, i was just at o'rileys and bought the filters randomly and slapped everything back on my car

either way when im done fixing my transmission ill be extending out the SRI into CAI since it costs less than $50 for me to do it, if you get the chance to id suggest you do that as well since its only gonna be better for the car anyways

02-11-2014, 01:15 AM	#21 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	I will check the pipe size I have it stored in a storage on the other side of town lmao I just said "Screw you RamAir and rust for all I care" Lmfao bad experiences man, not bashing the ram air, but I was left over heated in a part of my county that is close to mexico soooo yeaaaa NO BUENO that day.... luigi90210 likes this. __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
art pipes or test pipes?	henryy370z	Intake/Exhaust	13	05-20-2013 03:46 PM
[FOR SALE] GTM 2.5 Down Pipes	COSMO	Parts for sale (Private Classifieds)	23	04-03-2013 03:38 PM
FOR SALE - Z1 Motorsports 350Z--370Z HR SS Test Pipes (aka Down Pipes)	leilaamurray	New Forum Member	1	10-10-2012 08:12 PM
Long Tube Headers vs HFC vs Test Pipes vs Art Pipes	NickD	Intake/Exhaust	16	06-30-2012 02:24 PM
Test Pipes/ART Pipes + Y-Pipe with OEM CBE?	AlphaSnacks	Intake/Exhaust	0	04-16-2011 02:44 PM