Need Help removing studs to manifold...

zforlife · 01-05-2013, 04:56 PM

Just want to be sure I'm on the right track. I have no problem removing bolts (3 demons) however, the stud is still hanging out....and I'm not sure how to remove it.
Read where you basically put a nut on backwards/1 facing to loosen stud. Is this what everyone else is doing to remove studs?

Thanks for your help...I've been at it for a couple of hours.

SouthArk370Z · 01-05-2013, 05:13 PM

Double-nut it. Put two nuts on the stud and tighten them against each other. Put a wrench on the lower nut and twist the stud out.

Trips · 01-05-2013, 05:30 PM

If I may add?

You can also ensure both nuts are line up tight and use a deep socket.

zforlife · 01-05-2013, 05:31 PM

Plan to allow PB Blaster to penetrate over night and double nut in the morning.

I was thinking....this is too easy (removing nuts) only to find demon stud.

01-05-2013, 04:56 PM	#1 (permalink)
zforlife Base Member Join Date: Nov 2012 Location: Virginia Posts: 8 Drives: 2009 AT- Touring Rep Power: 12	Need Help removing studs to manifold... Just want to be sure I'm on the right track. I have no problem removing bolts (3 demons) however, the stud is still hanging out....and I'm not sure how to remove it. Read where you basically put a nut on backwards/1 facing to loosen stud. Is this what everyone else is doing to remove studs? Thanks for your help...I've been at it for a couple of hours.

01-05-2013, 05:13 PM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Double-nut it. Put two nuts on the stud and tighten them against each other. Put a wrench on the lower nut and twist the stud out. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

01-05-2013, 05:30 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	If I may add? You can also ensure both nuts are line up tight and use a deep socket. __________________

01-05-2013, 05:31 PM	#4 (permalink)
zforlife Base Member Join Date: Nov 2012 Location: Virginia Posts: 8 Drives: 2009 AT- Touring Rep Power: 12	Thanks southArk370 Plan to allow PB Blaster to penetrate over night and double nut in the morning. I was thinking....this is too easy (removing nuts) only to find demon stud.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARP Extended Wheel Studs	John@Z1	Tires/Wheels	13	11-26-2012 11:05 AM
Are these the right studs?	joshs09slvrZ	Brakes & Suspension	1	02-13-2012 05:42 PM
Question about oem studs	coaster	Brakes & Suspension	4	05-04-2011 01:24 PM
extended studs from 20 mm vs. 10 mm spacer	khern11	Wheels & Tires	1	03-22-2011 04:15 PM
OEM wheel hub bolts (studs)	old_account	Parts for sale (Private Classifieds)	2	06-06-2010 05:28 PM