Nissan 370Z Forum
Page 316 of 554 « First 216266306314315 316 317318326366416 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Fast Intentions exhaust is here! (http://www.the370z.com/intake-exhaust/6215-fast-intentions-exhaust-here.html)

knickick 09-01-2010 10:27 PM
Quote:
Originally Posted by eddieconfetti (Post 104535)
Thats great news. Cant wait for the reviews.
Yeah! You're right man! I can't also wait for the the other reviews. :D

red6spd 09-01-2010 10:46 PM
Quote:
Originally Posted by ZRoland (Post 704142)
Ok, finished the install a few minutes ago of my HFC, 18" res, cat-back exhaust. All I can say is WOW that is music to my ears. Took it for a test drive and seems the ECU has to relearn as large throttle lag in the begining but as I drove on it started to improve. OK, guys how long did it take your cars to have better response?
At WOT the power is incredible, quite different than the stock exhaust and the sound is excellent.
Installation, more trouble taking the stock cats out but after that everything went reall smooth. Only mod I might do is add a washer on the rear hanger. Tips are to close to the rear valence.

Tony, thanks for the excellent system. Keep up the good work and quality.

Hay got a question for you. Where exactly did you have to add the washer. Did you add the washer to where the mount bolts to the bottom of the car?

xdeslitx 09-01-2010 11:21 PM
Hey Tony can we get an update pleaseeee :)
Any possibility that mine will be ready for install before sept 18? Would love to have your exhaust for the canyon run.
Thanks

ZRoland 09-01-2010 11:50 PM
Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

red6spd 09-02-2010 12:32 AM
Quote:
Originally Posted by ZRoland (Post 704391)
Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!

Ok so basically your bringing the exhaust down a little using washers correct. I'm hopefully getting my exhaust soon and I want to be prepared to install it right away. Thanks for the input. Lets get some pics up, I would like to see what this system looks like on a Vert

SB350z 09-02-2010 01:09 AM
Quote:
Originally Posted by red6spd (Post 704319)
Hay got a question for you. Where exactly did you have to add the washer. Did you add the washer to where the mount bolts to the bottom of the car?
:iagree:

Quote:
Originally Posted by ZRoland (Post 704391)
Yes...2 inner mounts of the bracket where it hangs. I think I used a 5/16. Tighten the inner first then the out to where you want to level and adjust. This exhaust is phenomenal sound and performance. All I can say is WOW!!!!
Can you take a picture or two of this? Thanks. :tup:

ProfessorDave 09-02-2010 07:15 AM
How much overtime do you guys think Tony's going to pay his crew to work through the holiday weekend?:rolleyes:

Also craving an update:tiphat:

F.I. Inc. 09-02-2010 09:56 AM
Quote:
Originally Posted by ProfessorDave (Post 704537)
How much overtime do you guys think Tony's going to pay his crew to work through the holiday weekend?:rolleyes:

Also craving an update:tiphat:
Update coming soon! For the labor day overtime, not going to happen. It is hot here in California and we have all been working too hard. A nice little break to recharge the batteries is overdue.

BeachZTT 09-02-2010 10:12 AM
Quote:
Originally Posted by F.I. Inc. (Post 704728)
Update coming soon! For the labor day overtime, not going to happen. It is hot here in California and we have all been working too hard. A nice little break to recharge the batteries is overdue.
Definately take a break! Have a great weekend! You guys deserve it!!! :tiphat:

red6spd 09-02-2010 10:15 AM
Quote:
Originally Posted by BeachZTT (Post 704748)
Definately take a break! Have a great weekend! You guys deserve it!!! :tiphat:
Yea take as much time as you guys need, take a vacation to somewhere nice. (after you send my exhaust of course) I'm sure everyone else does not mind waiting LOL

ZRoland 09-02-2010 10:31 AM
I will take photos and post soon. It is raining here and as soon as the sun comes out so will pics.

ProfessorDave 09-02-2010 12:22 PM
Quote:
Originally Posted by F.I. Inc. (Post 704728)
Update coming soon! For the labor day overtime, not going to happen. It is hot here in California and we have all been working too hard. A nice little break to recharge the batteries is overdue.
I was totally kidding about the overtime by the way. Work on Labor Day? Defeats the purpose of the holiday!

red6spd 09-02-2010 12:45 PM
Quote:
Originally Posted by ProfessorDave (Post 704932)
I was totally kidding about the overtime by the way. Work on Labor Day? Defeats the purpose of the holiday!
I'll be working on Labor Day :(

ProfessorDave 09-02-2010 11:20 PM
Quote:
Originally Posted by red6spd (Post 704972)
I'll be working on Labor Day :(
That's not right. We should all take the day off, in solidarity of Fast Intentions hard work for us.

red6spd 09-03-2010 09:09 AM
Quote:
Originally Posted by ProfessorDave (Post 705903)
That's not right. We should all take the day off, in solidarity of Fast Intentions hard work for us.
Its cool, Double Time... I need the money to pay for Tony's exhaust. LOL


All times are GMT -5. The time now is 02:47 PM.
Page 316 of 554 « First 216266306314315 316 317318326366416 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2