Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Fast Intentions exhaust is here! (http://www.the370z.com/intake-exhaust/6215-fast-intentions-exhaust-here.html)

sig11 12-29-2009 11:00 AM

Lets give this another try. Chrome crashed three times when I tried to post this last night. This time I'm using TextEdit and pasting it in! :) This has been cross posted to the 350Z forum that the guys mentioned below are part of.

I cut my Christmas vacation at my parent's short to install my exhaust yesterday. At 9:30 I called Scott to cancel when the snow was coming down pretty heavily. My 07 350Z would not have made it down the road the way the 370 did. I suppose the new tires made the difference. The plan was to install the TDX and a set of Hotchkis sway bars. AJ and Scott were pretty excited when they realized it was an FI exhaust.

After getting it up on the stands I snapped this picture out of the garage:
http://www.reprehensible.net/~sig11/...humbs/snow.jpg
We expected another 2"+ before the day was through, but it warmed up and main roads were fairly clear by the time we finished.

Unfortunately we spent the bulk of our time trying to remove the right rear side of the stock sway bar. It came from the factory neatly cross threaded and proved impossible to remove. We ended up taking the wheel off in an attempt to remove it. Finally we got it in a vice and were still unable to bust it loose. My friends seem to think that I can talk the dealer into a replacement end link since it is so screwed up.

Once we gave up on the sway bars we decided to fire up the car to see what it sounded like with just the cats: (Video) What an amazing sound. The iphone video does it no justice.

Once we got everything roughed in we realized that the hardware packet had the wrong nuts. We could not match enough bolts with enough nuts and had to make a trip to the hardware store. $10 and 45 minutes later we gave it a quick first start so that AJ could hear it before he headed home for his wife's birthday. First start.

It's true that it sounds so much better in person than any of the videos posted previously show. We got everything tightened down and the cross brace remounted and off I went. (Note that when parking on a slight hill in the snow, the parking brake is not enough to stop the car from sliding. : )
http://www.reprehensible.net/~sig11/...umbs/slide.jpg
Yeah, the right tip is slightly lower than the left but it doesn't bother me at all and if you're not looking for it you will never notice. :)

Unfortunately now I will have to disassemble the damn thing to put the sway bar back on when I get a new end link. If you want to see the rest of the pictures click this. I haven't done anything at all to them. The third movie was an attempt at recording the cab sound but the iphone's microphone wasn't sensitive enough to pick anything of value up.

I just can't wait until spring so I can take the car for a real drive. The sway bar prevented us from having time to take the car to an empty parking lot for snow time fun or this would have been a far more interesting post. :)

speedworks 12-29-2009 01:01 PM

Quote:

Originally Posted by sig11 (Post 346888)
Yeah, the right tip is slightly lower than the left but it doesn't bother me at all and if you're not looking for it you will never notice. :)


Isn't there an adjustment for this, with washers?

sig11 12-29-2009 01:18 PM

Quote:

Originally Posted by speedworks (Post 347122)
Isn't there an adjustment for this, with washers?

There is. I just didn't feel like fooling with it as hard as it is to get to the top bolt. I may add a washer when I put the rear sway back on this spring. The car is pretty much immobile until spring anyway.

tommyguns 12-29-2009 10:25 PM

Tony check your pm please.

F.I. Inc. 12-29-2009 11:12 PM

Quote:

Originally Posted by tommyguns (Post 348020)
Tony check your pm please.

I got the PM I will call you tomorrow so we can get the order locked up. You will be #072. Thank you for the business, it is greatly appreciated...

Tony

tommyguns 12-29-2009 11:29 PM

Sweet I can't wait. Thanks Tony!

Valentino 12-30-2009 01:46 AM

I added a washer under each bolt on the rear left hanger and its aligned with the right tip. But the right tip is slightly pointing outward! how can i fix this? you really can't see it if you don't look for it. should the rear right pipe be lower then the left?

F.I. Inc. 12-30-2009 01:09 PM

TommyGuns #072, thank you for the order:

Digitonium: 001 (Installed)
Tonmed123: 002 (Installed)
Import111: 003 (Installed)
Zat Zuma: 004 (Installed)
Dszombiex: 005 (Installed)
FuszNissan: 006 (Installed)
Crbn_Fbr: 007 (Installed)
Phelan: 008 (Installed)
Kolya: 009 (Installed)
GMZ: 010 (Installed)
Wstar: 011 (Installed)
Zigmon: 012 (Installed)
Drisko: 013 - (Installed)
Jason S: 014 (Installed)
Daishi: 015 (Installed)
Kdomilger: 016 (Installed)
B1nks: 017 (Installed)
MrBMW: 018 (Installed)
MrBMW: 019 (Installed)
MrBMW: 020 (Installed)
MacDaddy: 021 (Installed)
Sonic370Z: 022 (Installed)
m4a1mustang: 023 (Installed)
Seeyabud86: 024(Installed)
Overzlus: 025 (Installed)
G35Guy84: 026 (Installed)
Argen G (Non Forum Member): 027
Pointman: 028 (Installed)
Racerxj17: 029 (Installed)
Dainedazz: 030(Installed)
Jerkey: 031 (Installed)
Caleb B (Non Forum Member): 032 (Installed)
Devious Z: 033 (Installed)
Nick B (Non Forum Member-England): 034(Installed)
DunW/4Bangerz: 035 (Installed)
David L (Non Forum Member):036 (Installed)
Cgmobile370Z: 037 (Installed)
Knives: 038 (Installed)
Abakja1: 039 (Installed)
Zulus370Z: 040 (Installed)
Valentino: 041 (Installed)
Lee A (Non Forum Member-Australia): 042 (Installed)
Cotizi: 043 (Installed)
Kannibul: 044 (Installed)
Zello370: 045 (Installed)
Earwicker7: 046 (Installed)
NewYorkJon34: 047 (Installed)
Philipp: 048 (Installed)
ZSteve: 049 (Installed)
Sig11: 050 (Installed)
Matt B (Non Forum Member): 051 (Installed)
Darkstar87695: 052 (Installed)
Liquid_G: 053 (Delivered)
V8Kilr: 054 (Delivered)
Motoextreme: 055 (Installed)
Darkseed: 056 (Installed)
GLeonard: 057 Z (Installed)
Speedworks: 058 (In Transit)
Bumblez: 059
Pablo Z:060 (Installed)
Moemeister: 061 (Shipping today)
Darkroam_1: 062
DirtyDave: 063
Waqar: 064
Pg6speed: 065
HNGonzalez: 066
NikonFM: 067
Sm16: 068
James G.(Non Forum Member): 069
Docaam: 070
LeonZ5: 071
TommyGuns: 072


Today and tomorrow left, are we going to make it to #075???

darkROAM_1 12-30-2009 03:33 PM

I dunno but my name looks next. Will likely come in right after my B-day ^_^

speedworks 12-30-2009 05:32 PM

Tony, got it today, looks great, and installed it - review to follow.

F.I. Inc. 12-30-2009 07:17 PM

Quote:

Originally Posted by speedworks (Post 348980)
Tony, got it today, looks great, and installed it - review to follow.

Nice review...

Thanks!

tommyguns 12-30-2009 10:36 PM

SWEET I'M ON THE LIST!:ughdance:

bumblez 01-01-2010 03:26 AM

tony~ you've got my pm!!!:tiphat:
I can't wait to have this lovely system!!
its my turn~:rofl2:

darkROAM_1 01-01-2010 10:43 AM

Quote:

Originally Posted by bumblez (Post 351409)
tony~ you've got my pm!!!:tiphat:
I can't wait to have this lovely system!!
its my turn~:rofl2:

Aww you couldn't help him get to 75 before the first, you had to wait til this year to order? I see how it is. =p

DirtyDave 01-01-2010 06:45 PM

Uh, according to the list BumbleZ ordered before you did.

Quote:

Originally Posted by darkROAM_1 (Post 351471)
Aww you couldn't help him get to 75 before the first, you had to wait til this year to order? I see how it is. =p



All times are GMT -5. The time now is 07:07 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2