Nissan 370Z Forum
Page 7 of 8 « First 56 7 8
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   STILLEN G3 Ultra Long Tube Intake (http://www.the370z.com/intake-exhaust/599-stillen-g3-ultra-long-tube-intake.html)

Josh@STILLEN 02-27-2009 10:59 AM
Very nicely! They are finalizing the jigs and such for production. Should be about 2-3 weeks until shipping..

love67 03-04-2009 04:33 PM
if the filter put right behide the gill...what if it's raining? or washing the car? isn't the filter will get wet?

RCZ 03-04-2009 05:09 PM
Absolutely nothing will happen if the filter gets a little wet.

semtex 03-04-2009 05:30 PM
It also comes with a shield that protects the front so that it doesn't get doused when it's raining.

love67 03-04-2009 06:25 PM
i see, thanks guys, because im worried(if one day i get this car) when i take my car to car wash, and i see they shoot some much water in it..i wonder if the water will get all over the filter..

semtex 03-04-2009 07:17 PM
Here's a pic from Stillen showing their intake on a G37. You can sorta see where the shield is (but it's a little hard to see because they've got some special transparency effect going on).

http://blog.stillen.com/wp-content/g...rustock_hi.jpg

Here's another pic of the setup:

http://blog.stillen.com/wp-content/g...cleaned_hi.jpg

wstar 03-05-2009 01:57 AM
My primary practical concern about these is: how hard is it going to be to service the K&N filters? If the answer is remove the bumper again for filter service, I'd have to pass on that.

semtex 03-05-2009 07:58 AM
^ Yeah, I've been wondering about that as well. But you don't actually have to remove the front fascia to install this, I've read. You just have to go up from under the car, which means you'd have to remove all the underpanels.

LiquidZ 03-05-2009 11:40 AM
Quote:
Originally Posted by RelentlessRY (Post 35199)
I can Vouch for Josh here. I work at Harbor Nissan in our performance dept. And I also own a 370z myself. I have a set of Headers from Stillen I am going to install and I am looking foward to these intakes. Josh When these come out Let me know, I just could not swing the exhaust at this time. I know Brad has been talking to Kyle and we are very excited about this new intake.

So Nissan will not warranty a Part from Stillen, But Stillen will. And dealing with Stillen first hand as a customer and a Vendor I give them 2 thumbs up!!!

And if your dealer is giving you issues about your Mods bring your car to me, I take care of 90% of the Z's that come in the door being a past 350z owner and a 370z owner now.

Relentless Ryan
Stillen has headers out that will fit the 370Z?

love67 03-06-2009 01:58 AM
Quote:
Originally Posted by semtex (Post 39217)
^ Yeah, I've been wondering about that as well. But you don't actually have to remove the front fascia to install this, I've read. You just have to go up from under the car, which means you'd have to remove all the underpanels.
that's still going to be pain in the *** to do...is it very different than the G2 in performance and the sound? because i only cares about the intake sounds...

ssqpolo 03-06-2009 03:29 AM
sooo..has anyone got one yet>

tvfreakazoid 03-08-2009 08:04 PM
Well I have to admit it sounds nice. Raspy and loud. Hopefully the Z would be louder and deeper if possible.

semtex 03-08-2009 08:06 PM
Quote:
Originally Posted by ssqpolo (Post 39636)
sooo..has anyone got one yet>
It's not released yet.

kustomZ 03-08-2009 08:15 PM
Looking at the G37, it would be sweet if those filters extended down to the fog light holes. I would open the bumper there to get even colder air from that point, and not have the filters directly in front of the radiator. It would also make servicing the filters a LOT easier.

I know most people wouldn't want to sacrifice their fog light mounts for the sake of an intake system, but I sure would!

semtex 03-08-2009 08:22 PM
Quote:
Originally Posted by kustomZ (Post 40798)
Looking at the G37, it would be sweet if those filters extended down to the fog light holes. I would open the bumper there to get even colder air from that point, and not have the filters directly in front of the radiator. It would also make servicing the filters a LOT easier.

I know most people wouldn't want to sacrifice their fog light mounts for the sake of an intake system, but I sure would!
I'm not sure I'd want them that low. It'd significantly increase the risk of hydro-lock if you have to drive through deep water in a heavy rainstorm or something. Considering how low these cars are to the ground already, I'd be really nervous if my intakes were that low to the ground. Just my :twocents:


All times are GMT -5. The time now is 11:03 AM.
Page 7 of 8 « First 56 7 8
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2