Originally Posted by Huckleberry (Post 1727209)

doesn't look all that bad.

Originally Posted by babbagandu (Post 1727210)

It's driving me crazy man

Originally Posted by babbagandu (Post 1727208)

Backed into a curb. Dented both of my mufflers. Here is a pic of the left one which is a bit worse than the right.

What are my options? Is this repairable? Will I need to get replacements mufflers from Tony and have them welded on?

Originally Posted by F.I. Inc. (Post 1727242)

I hate to be the bearer of bad news but that muffler is toast! If the other side is even close to that than it will need to be replaced as well.

Now from a cost standpoint it is not cost effective to just replace the mufflers. Here is your best two options.

1) Send the rear section to us and I will see if i can just cut the 2 mufflers out and weld new ones in.

2) Purchase a new rear section from us. Option 1 will be slightly less money but this way you will not have any downtime.

Give me a call on Monday and we can go from there.

Thanks, Tony

Originally Posted by F.I. Inc. (Post 1727242)

I hate to be the bearer of bad news but that muffler is toast! If the other side is even close to that than it will need to be replaced as well.

Now from a cost standpoint it is not cost effective to just replace the mufflers. Here is your best two options.

1) Send the rear section to us and I will see if i can just cut the 2 mufflers out and weld new ones in.

2) Purchase a new rear section from us. Option 1 will be slightly less money but this way you will not have any downtime.

Give me a call on Monday and we can go from there.




Thanks, Tony

Originally Posted by RUFFSTUFF (Post 1727340)

I think the best option is to stop looking at it. I bet it is functionally fine...

Originally Posted by frost (Post 1727366)

Can you even see it without crawling on the ground? Does it sound any different?