Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   NEW AAM Competition Short Tail Ti-Tip Exhaust Pre-Order Deal (http://www.the370z.com/intake-exhaust/54877-new-aam-competition-short-tail-ti-tip-exhaust-pre-order-deal.html)

Adam@AAMComp 06-07-2012 09:32 AM

We are just waiting for our shipment to leave the manufacture. We ordered a LARGE amount and they didn't have enough to fulfill the order. It is a big change as the tip design is totally different. The S/S one is a rolled tip this is a double roll basically and doesn't trumpet as much. Hard to describe but I will post pics of when they are here side by side to a S/S one. Also we are crazy backed up in production right now also which isn't a bad thing so to speak as the guys have plenty of work but it is bad for me in sales telling you guys about wait time :(.

http://vimeo.com/43606299 Go Pro Vid will be available after 11:30am est


-Adam

ZForce 06-10-2012 02:24 AM

Quote:

Originally Posted by Adam@AAMComp (Post 1745143)
Sorry for the delayed response but this is meant to only bolt to a factory Base Model, Sport and Convertible stock exhaust. It is just a muffler delete. I am not sure if it will fit the Nismo but I do know it will look very out of place on the Nismo rear bumper.


-Adam


Also we do not have any dyno numbers for this exhaust.


Thanks, and just for clarification, I have a 370Z sport touring NOT the Nismo model. What I do have is the S-tune CBE.

Huckleberry 06-11-2012 02:06 PM

Quote:

Originally Posted by Adam@AAMComp (Post 1758597)
We are just waiting for our shipment to leave the manufacture. We ordered a LARGE amount and they didn't have enough to fulfill the order. It is a big change as the tip design is totally different. The S/S one is a rolled tip this is a double roll basically and doesn't trumpet as much. Hard to describe but I will post pics of when they are here side by side to a S/S one. Also we are crazy backed up in production right now also which isn't a bad thing so to speak as the guys have plenty of work but it is bad for me in sales telling you guys about wait time :(.

AAM Competition 370Z S-Line Short Tail Exhaust : Titanium on Vimeo Go Pro Vid will be available after 11:30am est


-Adam

any time table yet? looking to install these soon.

Adam@AAMComp 06-11-2012 02:32 PM

We are waiting for shipping confirmation. Once that is known it takes about a week or so to get to us as long as there are no hiccups along the way then we can start to produce.


-Adam

Reaper42 06-11-2012 04:37 PM

Too bad you cant custom fabricate these to fit up to fast intentions exhaust. Id buy them in a heart beat

Huckleberry 06-19-2012 05:37 PM

any update?

Huckleberry 06-22-2012 11:06 AM

still waiting on that update.

Adam@AAMComp 06-22-2012 11:16 AM

Just waiting on the Tips to arrive at our facility. I have 20+ sets bent and ready to go for welding.


-Adam

Huckleberry 07-02-2012 02:43 PM

anything new? :)

sorry, i'm an impatient dude.

Adam@AAMComp 07-02-2012 03:03 PM

I am TOLD tips will be here in the next 7 or so business days.


-Adam

370Z Purist 07-03-2012 01:05 AM

Really excited to see people start rocking these Ti tips. Too bad that we SS tip owners can't just easily swap out!

XelNaga 07-11-2012 03:02 AM

Do you have received tips ? Any update ?

I'm very impatient !

Adam@AAMComp 07-11-2012 08:21 AM

We are flying them in next week as that is when they will be ready according to our supplier.


-Adam

Huckleberry 07-17-2012 08:57 PM

so, another month?

Sorry, man, but the wait is killing me.

XelNaga 07-23-2012 10:26 AM

any new ?

Huckleberry 07-27-2012 01:23 AM

its almost been 2 months. what's going on with these?

USMCASA 07-31-2012 05:04 PM

i was told they are getting the tips in next week then another week for welding them

Huckleberry 07-31-2012 05:27 PM

i've been told the same thing. that was last month and early this month.

if i have to callto get an official update, i'll be cancelling my order.

RandyD 07-31-2012 06:18 PM

i didnt think to ask at the bbq... although i know Adam was going north... so maybe his change affected this schedule.

Huckleberry 08-01-2012 04:40 PM

Just called AAM (didn't cancel), and it turns out dude isn't with the company anymore.

I was told that they would be receiving the tips tomorrow/friday and would start shipping them out at the start of next week.

Sales@AAMComp 08-06-2012 10:35 AM

[edit]


this is completely embarassing. the Ti tips that came in were all 3" diameter :( 2.5" is what we needed.. I can't believe this wasn't caught until now when I went to go take pictures of it!

No current ETA on the correct sized tips. All I can hope for is the supplier to rush it since this was a mistake on their end!!

Huckleberry 08-06-2012 11:17 AM

thanks for the update.

sent you a pm.

Sales@AAMComp 08-06-2012 01:31 PM

Quote:

Originally Posted by Huckleberry (Post 1855912)
thanks for the update.

sent you a pm.

PM'd you back huckleberry. I'm blown myself that these shipped in incorrectly :(

Sales@AAMComp 08-07-2012 08:25 AM

word from my sales manager this morning "Ti tips should be arriving Thursday morning 8/9"

way too much anticipation and I hate making you guys wait! update will be giving in a few days to confirm they arrived at the doors with the proper tip size this time!

sfearl1 08-07-2012 08:30 AM

What did you guys do w/ the 3" stock, return it?

Sales@AAMComp 08-07-2012 04:58 PM

Yup

The only other place they would fit is the 370z true dual 3" but those are only made to order

Huckleberry 08-07-2012 05:23 PM

can we atleast get photos of those? :/

Sales@AAMComp 08-07-2012 09:16 PM

pictures of the 3" tips? pictures taken with an iphone, they look 100x better in person really

https://lh6.googleusercontent.com/-R.../IMG_00259.jpg

https://lh3.googleusercontent.com/-P.../IMG_00261.jpg

https://lh3.googleusercontent.com/-r.../IMG_00260.jpg

whole box of worthlessness!! :(

sfearl1 08-07-2012 09:44 PM

Do these "neck" down to 3", or is the opening of Ti side 3"? I guess I'm not understanding why they won't work...

Huckleberry 08-07-2012 09:47 PM

see? How could anyone want stainless steel over these?

MaDMaXX 08-07-2012 10:33 PM

They're really nice looking tips.

Sales@AAMComp 08-08-2012 08:16 AM

Quote:

Originally Posted by sfearl1 (Post 1858497)
Do these "neck" down to 3", or is the opening of Ti side 3"? I guess I'm not understanding why they won't work...

the inlet is 3" :( your short tail pipes are only 2.5"
Quote:

Originally Posted by Huckleberry (Post 1858502)
see? How could anyone want stainless steel over these?

I agree!
Quote:

Originally Posted by MaDMaXX (Post 1858598)
They're really nice looking tips.

:tup:

Sales@AAMComp 08-09-2012 10:07 AM

tips have arrived and they are the right size!! we will have about 5 sets ready to ship out very soon! pm me for shipping quotes

https://lh3.googleusercontent.com/-l.../IMG_00266.jpg

Huckleberry 08-09-2012 10:48 AM

just need to know if i'm in the inital batch. how do i find out?

Sales@AAMComp 08-09-2012 10:55 AM

Quote:

Originally Posted by Huckleberry (Post 1860390)
just need to know if i'm in the inital batch. how do i find out?

if you've made payment before 8/8 for the Ti tip then you are in the initial batch. Sales manager told me about 4 sets are reserved for the preorder. If you PM me your information, I can confirm if we have a set reserved for you

Sales@AAMComp 08-09-2012 04:08 PM

guys if you're a premie member you get special pricing on this. or if you catch it within the next 30 days (for base members) it's the same! I've made new threads in both sections!

Huckleberry 08-13-2012 09:33 AM

Shipping this week?

Sales@AAMComp 08-13-2012 09:56 AM

Quote:

Originally Posted by Huckleberry (Post 1865833)
Shipping this week?

first thing tomorrow morning :tup:


All times are GMT -5. The time now is 07:02 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2