Sure hasn't been much about the new Takeda intake...

Methodical4u · 10-22-2011, 10:03 PM

I was looking over the g37 site and though they don't have it out for our cars... the g37 dyno I saw didn't show much gain with it. I don't think there is enough filter area vs. the Stillens in order to compete.

Anyone planning on giving this one a try when it comes out?

Methodical4u · 10-22-2011, 10:17 PM

Takeda Dyno - MyG37

MattP725 · 10-23-2011, 11:01 AM

Unless it is a cold air system (looks like a ram short system) then why bother... keep the stocks.

Nikkolai · 10-23-2011, 03:08 PM

Quote:

Originally Posted by MattP725

Unless it is a cold air system (looks like a ram short system) then why bother... keep the stocks.

He is talking about the long tube setup just like Stillen's except the Takeda does not require any cutting and the filter is shared between the piping compared to Stillen's dual filter setup.

Jordo! · 10-23-2011, 03:50 PM

Quote:

Originally Posted by Nikkolai

He is talking about the long tube setup just like Stillen's except the Takeda does not require any cutting and the filter is shared between the piping compared to Stillen's dual filter setup.

Link? I can't find any pics of that one

Nikkolai · 10-23-2011, 05:07 PM

Seb@SZ · 10-23-2011, 05:55 PM

Sharing the filter between the two banks is not a good idea. Each side will be pulling against each other.

Methodical4u · 10-23-2011, 06:12 PM

It doesn't look like as much surface area anyway

Jordo! · 10-23-2011, 11:02 PM

Quote:

Originally Posted by Nikkolai

That's an interesting design... would love to know how it performs.

It's certainly a counterinutitve set up...

Apparently they make a splash shield for it...

http://wwww.afepower.com/shop/detail...as&&brandID=78

Jordo! · 10-23-2011, 11:11 PM

Hey just found it on ebay for under $400 shipped if anyone is feeling adventurous.

Not a bad price if it can deliver results equivalent to the G3's.

TAKEDA TIME ATTACK COLD AIR INTAKE POLISH INFINITI 08-11 G37 07-08 G35 4DR. | eBay

Will@Logic · 10-24-2011, 10:52 PM

This is a really nice CAI. AFE is no newcomer when it comes to building intake systems that make power! They have a really good R&D department... Not just saying this because we offer the product. But, just trying to give solid input.

The surface area of the filter has been carefully calculated by their engineers. They have a forced induction kit for the BMW 335 that we have experience with that really delivers the goods. it also runs a single filter and has 2 turbos sucking from it!

This being a NA system, It wont have nearly the same amount of vacuum pulling and even then. The air get's drawn in from the opening in the pipes. It won't pull air from the other side. This actually creates a stronger vacuum. Because, you now have to pipes sucking in to one larger filter. It's not a small filter btw either guys.

The location of the filter is right behind the grill. That's ice cold air baby! 12+rwhp is no joke for just an intake. Hope this helps! Just my 2 cents...

Will

Nikkolai · 10-24-2011, 10:58 PM

Quote:

Originally Posted by willstophe

This is a really nice CAI. AFE is no newcomer when it comes to building intake systems that make power! They have a really good R&D department... Not just saying this because we offer the product. But, just trying to give solid input.

The surface area of the filter has been carefully calculated by their engineers. They have a forced induction kit for the BMW 335 that we have experience with that really delivers the goods. it also runs a single filter and has 2 turbos sucking from it!

This being a NA system, It wont have nearly the same amount of vacuum pulling and even then. The air get's drawn in from the opening in the pipes. It won't pull air from the other side. This actually creates a stronger vacuum. Because, you now have to pipes sucking in to one larger filter. It's not a small filter btw either guys.

The location of the filter is right behind the grill. That's ice cold air baby! 12+rwhp is no joke for just an intake. Hope this helps! Just my 2 cents...

Will

Any news or updates on when will this be released for the 370Z?

Methodical4u · 10-24-2011, 10:59 PM

Quote:

Originally Posted by willstophe

This is a really nice CAI. AFE is no newcomer when it comes to building intake systems that make power! They have a really good R&D department... Not just saying this because we offer the product. But, just trying to give solid input.

The surface area of the filter has been carefully calculated by their engineers. They have a forced induction kit for the BMW 335 that we have experience with that really delivers the goods. it also runs a single filter and has 2 turbos sucking from it!

This being a NA system, It wont have nearly the same amount of vacuum pulling and even then. The air get's drawn in from the opening in the pipes. It won't pull air from the other side. This actually creates a stronger vacuum. Because, you now have to pipes sucking in to one larger filter. It's not a small filter btw either guys.

The location of the filter is right behind the grill. That's ice cold air baby! 12+rwhp is no joke for just an intake. Hope this helps! Just my 2 cents...

Will

For the price, the power isn't to bad... however vs the G3's at 18-22 hp depending on the dyno if you're gonna pay, you may as well get the best out there.

Methodical4u · 10-24-2011, 11:35 PM

by the way... thus far on the G37 with independent testing the Takeda has not gotten the 12 hp that is advertised.. not saying that it couldn't under the correct conditions.

KB2 · 01-06-2012, 07:29 PM

Any word on This?

10-22-2011, 10:03 PM	#1 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	Sure hasn't been much about the new Takeda intake... I was looking over the g37 site and though they don't have it out for our cars... the g37 dyno I saw didn't show much gain with it. I don't think there is enough filter area vs. the Stillens in order to compete. Anyone planning on giving this one a try when it comes out?

10-23-2011, 05:55 PM	#7 (permalink)
Seb@SZ Enthusiast Member Join Date: Jan 2010 Location: Chatsworth Posts: 277 Drives: Zs Rep Power: 24	Sharing the filter between the two banks is not a good idea. Each side will be pulling against each other. __________________ Z Car Specialists www.specialtyz.com Blog http://specialtyz.com/blog/

10-23-2011, 11:11 PM	#10 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	Hey just found it on ebay for under $400 shipped if anyone is feeling adventurous. Not a bad price if it can deliver results equivalent to the G3's. TAKEDA TIME ATTACK COLD AIR INTAKE POLISH INFINITI 08-11 G37 07-08 G35 4DR. \| eBay __________________ Enjoy it. Destroy it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Air intake sale , HKS, Injen, Takeda	ERZperformance	Exhaust/Intake	233	06-24-2011 12:58 PM
Takeda Intake Installed!	kdo2milger	Intake/Exhaust	200	06-03-2011 07:11 AM
SELLING A TAKEDA 350Z intake 03-06	Bustinjust1n	Parts for sale (Private Classifieds)	2	02-13-2011 10:08 PM
FS Takeda Intake	M.J.	Parts for sale (Private Classifieds)	7	12-04-2009 02:11 PM

10-22-2011, 10:17 PM	#2 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	Takeda Dyno - MyG37

10-23-2011, 11:01 AM	#3 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Unless it is a cold air system (looks like a ram short system) then why bother... keep the stocks.

10-23-2011, 05:07 PM	#6 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 14

10-23-2011, 06:12 PM	#8 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	It doesn't look like as much surface area anyway

10-24-2011, 10:52 PM	#11 (permalink)
Will@Logic Enthusiast Member Join Date: Feb 2011 Location: Irvine, CA Posts: 291 Drives: 09 Infiniti G37S 6MT Rep Power: 14	This is a really nice CAI. AFE is no newcomer when it comes to building intake systems that make power! They have a really good R&D department... Not just saying this because we offer the product. But, just trying to give solid input. The surface area of the filter has been carefully calculated by their engineers. They have a forced induction kit for the BMW 335 that we have experience with that really delivers the goods. it also runs a single filter and has 2 turbos sucking from it! This being a NA system, It wont have nearly the same amount of vacuum pulling and even then. The air get's drawn in from the opening in the pipes. It won't pull air from the other side. This actually creates a stronger vacuum. Because, you now have to pipes sucking in to one larger filter. It's not a small filter btw either guys. The location of the filter is right behind the grill. That's ice cold air baby! 12+rwhp is no joke for just an intake. Hope this helps! Just my 2 cents... Will

10-24-2011, 11:35 PM	#14 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	by the way... thus far on the G37 with independent testing the Takeda has not gotten the 12 hp that is advertised.. not saying that it couldn't under the correct conditions.

01-06-2012, 07:29 PM	#15 (permalink)
KB2 Base Member Join Date: Apr 2010 Location: Illinois Posts: 243 Drives: 370z Rep Power: 15	Any word on This?