R2C intake dyno'd ... ever?

Methodical4u · 07-24-2011, 01:27 AM

Yes I have searched on both here and on google, but never found anything... just curious if anyone here has these and if they have had the car on the dyno? It looks like quite a nice set-up... especially if you put some fang vents to it.

Nikkolai · 07-24-2011, 08:24 PM

That's because they're for the G37 but can fit the 370Z. Browse through G37 forums and there's plenty of dyno's on it.

Methodical4u · 07-24-2011, 08:40 PM

Not to be a jerk but a G37 is not a 370z... the G37 with that intake yields similar results as the Stillen G3's which no SRI set-up has done on the 370z's yet. Please just simply don't answer if you don't know what the answer is.

Nikkolai · 07-25-2011, 06:37 AM

Not sure what answer you're looking for since no one has these in the 370Z and dyno'ed it. Or maybe I should've said that in the first place? The G37 share the same engine so not sure why you'd say a G37 isn't the same as a 370Z but main difference would probably be the aerodynamics of the front bumpers and how either one takes in air. Sorry I couldn't answer your question because I've tried looking into this before when I was looking for a Stillen long tube alternative.

FL 4Motion · 07-25-2011, 04:57 PM

I was on R2C's website and it looked like they had an intake model specifically for the 370z.

I'm also interested in any dynos on this intake and if it's worth it over just dropins and post maf tubes.

Personally, I'm skeptical that any sri will be worth the $$ but I hope I'm wrong.

Methodical4u · 07-25-2011, 05:29 PM

Quote:

Originally Posted by FL 4Motion

I was on R2C's website and it looked like they had an intake model specifically for the 370z.

I'm also interested in any dynos on this intake and if it's worth it over just dropins and post maf tubes.

Personally, I'm skeptical that any sri will be worth the $$ but I hope I'm wrong.

I don't think the gains would be worth it... SUPPOSEDLY the G37's get the same power as the Stillen... but we're talking about a completely different car as far as air flow and such.

Methodical4u · 07-25-2011, 05:34 PM

Quote:

Originally Posted by Nikkolai

Not sure what answer you're looking for since no one has these in the 370Z and dyno'ed it. Or maybe I should've said that in the first place? The G37 share the same engine so not sure why you'd say a G37 isn't the same as a 370Z but main difference would probably be the aerodynamics of the front bumpers and how either one takes in air. Sorry I couldn't answer your question because I've tried looking into this before when I was looking for a Stillen long tube alternative.

oh no big deal man... I wasn't trying to come off like a jerk... it is the same, but yeah the aero of the Z seems to make a difference when it comes to the different intakes. I wish they would make the same power, since it seems it would save a bit more install work and it really is a nice looking intake set up.

Teddy KGB · 07-25-2011, 06:01 PM

It looks like it's made of chrome as well. Can't remember where on the forum I read it, but I believe it was proven that chrome absorbed and retained more heat from the engine than other materials. That, to me, would be a detriment to performance. Looks nice though.

I still think that for the money, you really can't go wrong with the HPS, Mishi, or Z1 tubes and good filter.

Now, having said that, someone go buy the R2 and do a dyno to prove me wrong!

Chriz · 07-26-2011, 08:09 PM

Quote:

Originally Posted by Methodical4u

Not to be a jerk but a G37 is not a 370z... the G37 with that intake yields similar results as the Stillen G3's which no SRI set-up has done on the 370z's yet. Please just simply don't answer if you don't know what the answer is.

The top secret intake had similar gains compared to the G3's and its a SRI, but the price is not justifiable.

I also think the intake system in the g37 is quite similar to the 370z in terms of airflow so I don't think g37 dyno charts should be completly ignored. If you look at the inlet holes for the stock filter by removing the front bumper of a g37, they are shaped just like the Z's. I would even go as far and say that the parts such as the filter box are interchangeable, although I may be wrong.

Methodical4u · 07-26-2011, 09:41 PM

Quote:

Originally Posted by Chriz

The top secret intake had similar gains compared to the G3's and its a SRI, but the price is not justifiable.

I also think the intake system in the g37 is quite similar to the 370z in terms of airflow so I don't think g37 dyno charts should be completly ignored. If you look at the inlet holes for the stock filter by removing the front bumper of a g37, they are shaped just like the Z's. I would even go as far and say that the parts such as the filter box are interchangeable, although I may be wrong.

I know the engine and such is the same... what I am saying is that each car flows air over it differently... the SRI's do not seem to yield results as well as on the G37's PERHAPS because the air flow on the Z is different in that it does not get the R2C's the same way... that is why I am asking for a dyno of a 370z... I don't want a G37 dyno ... I am looking for a stock Z with a baseline and then these intakes. Otherwise, the Stillen is still king for the Z.

Rooskey · 07-25-2011, 11:11 PM

If im looking at the correct website (R2Cperformance.com) the 370z and g37 share the same part #. It looks just like the K&N Typhoon to me. BTW a guy on myg37 is about to post up before and after dyno results.

Methodical4u · 07-25-2011, 11:44 PM

Quote:

Originally Posted by Rooskey

If im looking at the correct website (R2Cperformance.com) the 370z and g37 share the same part #. It looks just like the K&N Typhoon to me.

the cars are NOT the same the way the air flows... I don't know whats so hard to understand about that?

Rooskey · 07-25-2011, 11:56 PM

Quote:

Originally Posted by Methodical4u

the cars are NOT the same the way the air flows... I don't know whats so hard to understand about that?

Not trying to be an a$$ but what does airflow have to do with a car sitting still on dyno. There is no airflow.

Methodical4u · 07-26-2011, 12:52 AM

Quote:

Originally Posted by Rooskey

Not trying to be an a$$ but what does airflow have to do with a car sitting still on dyno. There is no airflow.

have you been to many dynos? They usually have air moving to SIMULATE going down the road bro.

Rooskey · 07-26-2011, 12:51 AM

Ok just got the results. Dude did three pulls before and after with about 3hrs in between. He stated that he did do some interestate driving between so the ecu could compensate. Only previous mod was berks hfc's. Average between all pulls before (263hp, 234tq) and after (276hp, 241tq). So basically he gained 13hp and 7tq.

07-24-2011, 01:27 AM	#1 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	R2C intake dyno'd ... ever? Yes I have searched on both here and on google, but never found anything... just curious if anyone here has these and if they have had the car on the dyno? It looks like quite a nice set-up... especially if you put some fang vents to it.

07-25-2011, 06:37 AM	#4 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 14	Not sure what answer you're looking for since no one has these in the 370Z and dyno'ed it. Or maybe I should've said that in the first place? The G37 share the same engine so not sure why you'd say a G37 isn't the same as a 370Z but main difference would probably be the aerodynamics of the front bumpers and how either one takes in air. Sorry I couldn't answer your question because I've tried looking into this before when I was looking for a Stillen long tube alternative. Last edited by Nikkolai; 07-25-2011 at 08:50 AM.

07-25-2011, 11:11 PM	#11 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 15	If im looking at the correct website (R2Cperformance.com) the 370z and g37 share the same part #. It looks just like the K&N Typhoon to me. BTW a guy on myg37 is about to post up before and after dyno results. Last edited by Rooskey; 07-25-2011 at 11:47 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dyno'd my 2010 Z w/Stillen catback and k&n drop ins	gh0st3794	Engine & Drivetrain	7	06-07-2011 10:05 AM
370z Injen Speed Pro Series Intake \| AEM ETI Intake stupid pricing	Tunerz_Store	Exhaust/Intake	11	11-01-2010 01:43 PM
Dyno'd my G37, and a few others...	G37Sam	Other Vehicles	7	06-16-2009 09:24 AM
where can i get dyno'd in socal(SFV)?	tru_Asiatik	Southern California Region	13	05-19-2009 11:27 PM
7AT w/ I-H-C-E Dyno'd	wstar	Intake/Exhaust	34	04-14-2009 12:20 AM

07-24-2011, 08:24 PM	#2 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 14	That's because they're for the G37 but can fit the 370Z. Browse through G37 forums and there's plenty of dyno's on it.

07-24-2011, 08:40 PM	#3 (permalink)
Methodical4u A True Z Fanatic Join Date: Jun 2011 Location: Maryland Posts: 1,393 Drives: 11 370 6mt pw w/sp Rep Power: 15	Not to be a jerk but a G37 is not a 370z... the G37 with that intake yields similar results as the Stillen G3's which no SRI set-up has done on the 370z's yet. Please just simply don't answer if you don't know what the answer is.

07-25-2011, 04:57 PM	#5 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	I was on R2C's website and it looked like they had an intake model specifically for the 370z. I'm also interested in any dynos on this intake and if it's worth it over just dropins and post maf tubes. Personally, I'm skeptical that any sri will be worth the $$ but I hope I'm wrong.

07-25-2011, 06:01 PM	#8 (permalink)
Teddy KGB Base Member Join Date: Mar 2011 Location: Atlanta, GA Posts: 79 Drives: 40th Z, Tundra, CBR6 Rep Power: 14	It looks like it's made of chrome as well. Can't remember where on the forum I read it, but I believe it was proven that chrome absorbed and retained more heat from the engine than other materials. That, to me, would be a detriment to performance. Looks nice though. I still think that for the money, you really can't go wrong with the HPS, Mishi, or Z1 tubes and good filter. Now, having said that, someone go buy the R2 and do a dyno to prove me wrong!

07-26-2011, 12:51 AM	#15 (permalink)
Rooskey Track Member Join Date: Jul 2010 Location: South Carolina Posts: 974 Drives: 2014 Alpha7 GTR Rep Power: 15	Ok just got the results. Dude did three pulls before and after with about 3hrs in between. He stated that he did do some interestate driving between so the ecu could compensate. Only previous mod was berks hfc's. Average between all pulls before (263hp, 234tq) and after (276hp, 241tq). So basically he gained 13hp and 7tq.