Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   which exhaust System and intake is best for 370Z (http://www.the370z.com/intake-exhaust/34708-exhaust-system-intake-best-370z.html)

doublea2527 04-13-2011 12:08 PM

I heard Bounty makes a good exhaust....You know the paper towel roll exhaust!

Dre22 04-13-2011 09:59 PM

thanks i kinda got a few ideas of what i probably get =D i first want my car to have a nice sexxy sound when im driving by =p

FromG2Z 04-13-2011 10:59 PM

Quote:

Originally Posted by Dre22 (Post 1052815)
thanks i kinda got a few ideas of what i probably get =D i first want my car to have a nice sexxy sound when im driving by =p

This was the one of the very few disappointments I have with the Z (other is C pillar visibility). The stock exhaust sound was nothing like the 350Z's or my G35coupe. So, this week, I finally broke down and got my Invidia Gemini, thanks to the recommendations from the guys here. I can't wait to get it installed. Best bang for buck around, imo.

destinyZ 04-14-2011 06:38 AM

honestly if you just want performance, cheap, clean sound, and plan to be N/A for a while......do the AAM muffler deleate, just sayin

Red__Zed 04-14-2011 08:06 AM

Quote:

Originally Posted by destinyZ (Post 1053180)
honestly if you just want performance, cheap, clean sound, and plan to be N/A for a while......do the AAM muffler deleate, just sayin

The Y pipe needs to be changed as well if you want power.

daisuke149 04-14-2011 08:12 AM

Quote:

Originally Posted by Dre22 (Post 1052815)
thanks i kinda got a few ideas of what i probably get =D i first want my car to have a nice sexxy sound when im driving by =p

In that case, Stillen Gen III's and ARK Exhaust.

onzedge 04-14-2011 08:16 AM

Quote:

Originally Posted by doublea2527 (Post 1051500)
I heard Bounty makes a good exhaust....You know the paper towel roll exhaust!

True, but you need to wrap the tube with aluminum foil or it will not resonate correctly.

destinyZ 04-14-2011 02:43 PM

Quote:

Originally Posted by Red__Zed (Post 1053221)
The Y pipe needs to be changed as well if you want power.

from what ive seen, we dont get much of anything from just a CBE. If OP plans on doing a full bolt on setup then yes he should consider changing out the y pipe. I recomended the AAM exhaust deleate for a cost effective way to change the cars note.

which cbe is not a good question because, like stated before, you will recieve so many different answers. just get on youtube and look them up and be sure to look at the other exhaust mods in the video's, they will change how it sounds.

Stillen, HKS, ARK, Indivia......

thats the best advice i can give you man.

Red__Zed 04-14-2011 03:14 PM

Quote:

Originally Posted by destinyZ (Post 1053906)
from what ive seen, we dont get much of anything from just a CBE. If OP plans on doing a full bolt on setup then yes he should consider changing out the y pipe. I recomended the AAM exhaust deleate for a cost effective way to change the cars note.

which cbe is not a good question because, like stated before, you will recieve so many different answers. just get on youtube and look them up and be sure to look at the other exhaust mods in the video's, they will change how it sounds.

Stillen, HKS, ARK, Indivia......

thats the best advice i can give you man.


I've seen most people gaining 12-25whp from a CBE. That's a pretty substantial gain.

destinyZ 04-14-2011 03:15 PM

Quote:

Originally Posted by Red__Zed (Post 1053985)
I've seen most people gaining 12-25whp from a CBE. That's a pretty substantial gain.

no...not off CBE maybe with HFC or TP's along with a tune

Red__Zed 04-14-2011 03:18 PM

Quote:

Originally Posted by destinyZ (Post 1053989)
no...not off CBE maybe with HFC or TP's along with a tune

FI gains:


Baseline (Stock)
Run 1- 281.94 RWH / 241.25 RWT
Run 2- 276.51 RWH / 241.52 RWT
Run 3- 284.12 RWH / 240.89 RWT
Baseline Average: 280.86 RWH / 241.22 RWT



F.I. TDX Cat Back 12" Resonators / Stock Cats
Run 1- 300.81 RWH / 251.08 RWT
Run 2- 301.62 RWH / 252.11 RWT
Run 3- 301.30 RWH / 253.89 RWT
F.I. TDX C.B. 12" Res. Average: 301.24 RWH / 252.36 RWT

daisuke149 04-14-2011 03:22 PM

i didnt get exact dyno numbers for the ARK alone, as when i put it on i had other mods. but i'll tell ya. When i toko the ARK off and put on a stock CBE it just felt baddddd. sluggish. : (

Def a top end punch missing.

FromG2Z 04-14-2011 03:38 PM

Quote:

Originally Posted by Red__Zed (Post 1053994)
FI gains:


Baseline (Stock)
Run 1- 281.94 RWH / 241.25 RWT
Run 2- 276.51 RWH / 241.52 RWT
Run 3- 284.12 RWH / 240.89 RWT
Baseline Average: 280.86 RWH / 241.22 RWT



F.I. TDX Cat Back 12" Resonators / Stock Cats
Run 1- 300.81 RWH / 251.08 RWT
Run 2- 301.62 RWH / 252.11 RWT
Run 3- 301.30 RWH / 253.89 RWT
F.I. TDX C.B. 12" Res. Average: 301.24 RWH / 252.36 RWT

:icon18::iagree:

Exactly. This is substantial for "just" the CBE mod, and nothing else (which is what I will be doing this Saturday). I'm stock save for the CBE. So I hope to get not only a better more aggressive sounding note/sound, but *some* gain in hp is an added bonus.

Red__Zed 04-14-2011 03:43 PM

Quote:

Originally Posted by FromG2Z (Post 1054052)
:icon18::iagree:

Exactly. This is substantial for "just" the CBE mod, and nothing else (which is what I will be doing this Saturday). I'm stock save for the CBE. So I hope to get not only a better more aggressive sounding note/sound, but *some* gain in hp is an added bonus.

You'll get a notable bump. I noticed a difference in feel, along with a huge difference in sound.

destinyZ 04-15-2011 05:24 PM

Quote:

Originally Posted by Red__Zed (Post 1053994)
FI gains:


Baseline (Stock)
Run 1- 281.94 RWH / 241.25 RWT
Run 2- 276.51 RWH / 241.52 RWT
Run 3- 284.12 RWH / 240.89 RWT
Baseline Average: 280.86 RWH / 241.22 RWT



F.I. TDX Cat Back 12" Resonators / Stock Cats
Run 1- 300.81 RWH / 251.08 RWT
Run 2- 301.62 RWH / 252.11 RWT
Run 3- 301.30 RWH / 253.89 RWT
F.I. TDX C.B. 12" Res. Average: 301.24 RWH / 252.36 RWT

go do a baseline then go and dyno it yourself let us know how you do before a tune or any supporting mods.

the best ive seen is 46WHP gain of of all stillen parts.

the car felt weaker when he changed out the CBE because the sound was muffled (so that just was a mental state of mind) and the muffler in the rear chokes it a bit after you have supporting mods because you no longer have that staight, free flowing exhaust. *felt slower* post up the number plus he never stated about a dyno numbers before/after/and after the removal. im tellin you man, it wont happen but ill let you believe what you guys want.

i can 100% garentee you the ARK gives you 1-2WHP on its own

Im done, enjoy the exhaust.....
no i dont have dyno sheets to prove it but its here in the forum somwhere.


All times are GMT -5. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2