Motordyne M370
Does anybody have any info on this Motordyne M370 Manifold?
Motordyne Engineering M370 Manifold Nissan 370Z - M370 Thoughts? |
Seriously type that into the search...
Try this 862 posts thread for starters... http://www.the370z.com/intake-exhaus...-manifold.html |
From what I have seen it's really not worth the money.
|
Hey man thanks, I am fairly new to the site and was unaware that we could do a search like that so sorry about the "beating a dead horse" post.
|
I saw orange so I didn't look at when you joined :tup:
But yeah search and advanced (google) search is pretty helpful. I agree on the opinion that it's currently not worth it though.. |
Quote:
|
I'm doing a before/after dyno at the Z1 meet.
|
The M-370 is well worth it. Yes it true HP and TQ will vary from one result to another, especially depending on what dyno is being used. I have had this for almost a year, I truly love it. Its power you can actually feel, you can tell the difference in the way the car revs and responds when driving. If you keep seeing the Motordyne threads, you’ll see its well worth it, a lot of R&D went into it, plus Motordyne produces great quality products. If this is your first time having a Z, do research on the company, they specialize with Z’s and G’s and have been producing great products for last couple of years. Many guys here on the Z forums are very technical and informative and are glad to help answer your questions.
|
IMHO...it really depends on your preference and perception of this product to say whether it is worth it or not....If you read the posts on the thread you will see that it did good for some but not for others...Granted that Motordyne put a lot of R&D into this product and also has been on the market for Z's and G's for years, but what did it for me was there just wasn't enough consistency with those that purchased it....
|
A lot of R&D.... Lol.. He figured out a way to relocate the bolt holes on a standard HR manifold and that's the only change he made... It's a OEM Nissan piece costing $250 if you bought it in the store, with changed bolt pattern...
With full bolt ons you will be losing power... Your money is better spend elsewhere... Or keep your money in your pocket until VVEL is widely incorporated into tuning. |
Quote:
:iagree: They make great quality products, but this manifold for, what is it? 7-800 bucks is not worth it, at least on a fully bolted NA Z. Nothing against motordyne I would buy other products from them in a heart beat. Its kind of like stillen, I love there intakes exhaust etc but there SC kit is crap from what I have seen. (just an example) |
Yeah, I was one of the first to test it. The gains are very minimal for the price. I gained about 8whp/wtq for a matter of 1000rpms from 5k-6k rpms. Othere than that, it varied from -3/+3 whp/wtq.
I would have rather saved my money. |
I think it is worth it.. My car pulls hard in the mid range.... Worth it to me.
|
I love mine... It took about 25 miles of ECU adjusting but the mid-range pulls so much harder. There were areas in the mid-range I picked up 12whp, 12ft-lbs to the wheels and made an additional 6whp all the way up to redline from the top-end.
|
I love mine as well...
I had to take my Z in for a Short Block replacement due to oil consumption at 39k miles. I had M370, ERZ HFC, Gemini CBE, K&N Typhoon, and Cobb AP (AAM Canned Tune). I have 1500 miles on the new Short Block and have all my parts back on except the M370 and I can definitely tell the difference. I’m past the break in so I am able to go WOT in my Z again and it’s the tq and the howl that M370 makes that I really miss. I can still fell the power at the top of the RPM range but at lower RPMs and mid range the power/tq is no longer noticeable. It almost feels like dead spots were I would normally have a grin from the lower/midrange RPM pull. I think it is worth purchasing. I will be putting mine back on in a few months can't wait! |
I installed mine today, and damn, the first difference was how the car revs even when stand still.
I drove around 100 miles way back home and looks like i have reduced the weight or something it pulls harder and faster no dyno just driving impressions, there is a goood difference for sure, which I never felt before with exhaust, TPs or CAI installation. IMO its totally worth the money, considering same almost same price as good CAI which I can say are kind of useless I will be going for a dyno again and see what gains are there |
Maybe I'm weird...
I can feel the power my G3 intakes give. |
Quote:
|
Quote:
Quote:
Next week or tomorrow I will see what my Uprev guy say about the changes he can see and make the most of it. But during driving butt dyno has gone crazy :tup: |
I may very well pull the trigger on this in the near future. I'm keeping it all motor and am doing ARK CBE/GTM RTP/COBB hoses/K&N/UpRev. I'll save the upRev for last obviously, after the manifold.
|
i know its not carb but will they notice? will it pass emissions?
|
Quote:
|
All times are GMT -5. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2