Please help: Is there a reason why.....

DeLRo · 11-19-2010, 05:59 PM

So I got my Berk Test Pipes installed this afternoon along with an oil change. I screwed up and didn't get the right gaskets and have an exhaust leak.

The problem and I can't think of or if it would relate in any way is my oil temp is higher now. Before I changed the oil my avg temp was 185-190. After running a few errands my temp is above 220. I haven't been driving hard at all, I've actually been driving slower since I have the exhaust leak and won't be able to get a new gasket till Tues.

I'm using the same oil as was in the engine before Mobil1 synthetic, but with a Purolator filter(larger one like AK) instead of the Mobil1 filter. The air temp today is also 20 degrees colder since it's supposed to rain tonight. I haven't seen temps this high since I was still using Ester oil.

azn370z · 11-19-2010, 06:37 PM

Just to let you know 220 is a normal temp once the engine is warmed up. Mine has never gone over that but it is ok to Go higher and when it reaches 280, then the car goes into limp mode.

DeLRo · 11-20-2010, 05:08 AM

Quote:

Originally Posted by azn370z

Just to let you know 220 is a normal temp once the engine is warmed up. Mine has never gone over that but it is ok to Go higher and when it reaches 280, then the car goes into limp mode.

Yes I'm aware that 220 is avg. But before I changed oil my avg temps we below 200 for the type of driving I was doing in this weather. Plus today it was in the low 50's. I just thought it was weird that temps would increase after an oil change like that. I'll give it a few days and see if it comes down a bit.

wilsonp · 11-20-2010, 03:14 PM

Is the exhaust flow near any oil flow? Is the water temp normal?

DeLRo · 11-22-2010, 05:05 PM

Quote:

Originally Posted by wilsonp

Is the exhaust flow near any oil flow? Is the water temp normal?

No and water temp is normal.

It's been a few days now and temps have returned back to normal, but I am now getting a check engine light. Going back to shop tomorrow to hopefully get it all sorted out.

Lol... this is my first mod on this car and already having issues. Tons of mods on my integra and don't remember having a single problem.

LuckyJinx · 11-22-2010, 05:43 PM

This is normal and it'll say check engine, but that'll go away.

Jordo! · 11-22-2010, 06:07 PM

The CEL is probably due to the ECU seeing the same voltage change between the first and second O2 in each bank.

Try the steel wool trick -- supposedly cramming some steel wool into the O2 bung filters the exhaust gasses enough to slow down the flow so the ECU thinks the cat is still there.

The oil temps were probably nothing.

evse82 · 11-24-2010, 06:43 PM

Nah the CEL will be from the exhaust leak. I had the same issue with mine. As soon as the leak was fixed the CEL vanished

DeLRo · 11-26-2010, 04:55 PM

Quote:

Originally Posted by evse82

Nah the CEL will be from the exhaust leak. I had the same issue with mine. As soon as the leak was fixed the CEL vanished

Thanks, I was hoping that was it. Where you also running Berk TP's? Did you have to use steel wool?

Staples · 11-26-2010, 08:05 PM

Non-fouler option is always a good idea, especially on Berk's equipment. They've been known to cause a check engine light for a while now. The J-bend is the best design to alleviate any of those issues, but if they don't have them (which they don't)... you need to go the non-fouler route.

11-19-2010, 05:59 PM	#1 (permalink)
DeLRo Enthusiast Member Join Date: Jun 2010 Location: CA Age: 41 Posts: 343 Drives: 10 370Z MB T/S 6MT Rep Power: 14	Please help: Is there a reason why..... So I got my Berk Test Pipes installed this afternoon along with an oil change. I screwed up and didn't get the right gaskets and have an exhaust leak. The problem and I can't think of or if it would relate in any way is my oil temp is higher now. Before I changed the oil my avg temp was 185-190. After running a few errands my temp is above 220. I haven't been driving hard at all, I've actually been driving slower since I have the exhaust leak and won't be able to get a new gasket till Tues. I'm using the same oil as was in the engine before Mobil1 synthetic, but with a Purolator filter(larger one like AK) instead of the Mobil1 filter. The air temp today is also 20 degrees colder since it's supposed to rain tonight. I haven't seen temps this high since I was still using Ester oil.

11-19-2010, 06:37 PM	#2 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	Just to let you know 220 is a normal temp once the engine is warmed up. Mine has never gone over that but it is ok to Go higher and when it reaches 280, then the car goes into limp mode. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

11-20-2010, 03:14 PM	#4 (permalink)
wilsonp A True Z Fanatic Join Date: Jul 2010 Location: Virginia Posts: 1,134 Drives: 2009 Touring Sp Nav Rep Power: 16	Is the exhaust flow near any oil flow? Is the water temp normal? __________________ 2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black

11-22-2010, 05:43 PM	#6 (permalink)
LuckyJinx Enthusiast Member Join Date: Sep 2010 Location: Lexington, SC Posts: 465 Drives: 09 Nissan 370z Nismo Rep Power: 14	This is normal and it'll say check engine, but that'll go away. __________________

11-22-2010, 06:07 PM	#7 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	The CEL is probably due to the ECU seeing the same voltage change between the first and second O2 in each bank. Try the steel wool trick -- supposedly cramming some steel wool into the O2 bung filters the exhaust gasses enough to slow down the flow so the ECU thinks the cat is still there. The oil temps were probably nothing. __________________ Enjoy it. Destroy it.

11-24-2010, 06:43 PM	#8 (permalink)
evse82 Track Member Join Date: Nov 2008 Location: Melbourne, AUS Posts: 609 Drives: Black 370z MT Rep Power: 17	Nah the CEL will be from the exhaust leak. I had the same issue with mine. As soon as the leak was fixed the CEL vanished

11-26-2010, 08:05 PM	#10 (permalink)
Staples Track Member Join Date: Sep 2010 Location: Baltimore, MD Posts: 546 Drives: '08 Infiniti G37s Rep Power: 15	Non-fouler option is always a good idea, especially on Berk's equipment. They've been known to cause a check engine light for a while now. The J-bend is the best design to alleviate any of those issues, but if they don't have them (which they don't)... you need to go the non-fouler route. __________________ '08 Infiniti G37s - Forced Induction Fed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
limp mode for no reason at all?	Gestalt73	Nissan 370Z General Discussions	25	10-20-2018 12:34 AM
A major reason for RUST!Graderdust	40th370z	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	03-18-2010 04:22 PM
Another reason to watch MythBusters	BanningZ	Gentleman's Club	29	11-03-2009 02:53 PM
This is the reason why I hate shopping for cars	cossie1600	Nissan 370Z Pricing / Ordering Discussions	23	07-14-2009 08:02 AM
Any Reason To Think 370Z Will Be Reasonable In Snow?	zcarj	Nissan 370Z General Discussions	10	11-30-2008 03:02 PM