![]() |
Is there a picture of the OEM cat bracket that is needed to be reused? I'm getting my ART pipes put on this weekend and don't wanna go through any headaches.
|
Quote:
http://www.370z.com/Portals/0/Magazi...iystep5_sm.jpg |
glad everything worked out.
|
I contacted who i got the exhaust from and they are sending me out a new piece right away.. Still though if it happens again invidia needs to use a higher quality flex joint.. looking on other forums and searching the flex joint issue seems to be a semi common occurance. Thats what the flex joint is there for.. to flex from the vibration and movement of the engine if it keeps breaking because of that whats the point.
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Any body with the Gemini and ART pipes have this issue?
Tony@Motordyne says it not needed and docaam who has this setup says he didn't use it wuth no issue. |
Hmm will this exhaust work with the tanabe y pipe?
|
Quote:
|
Oh it's an x pipe. I don't know where I read y pipe lol. I had an hks before in my old car. Now thinking of getting this since it's cheaper. Hopefully I'll have no problems.
|
Something inside of my muffler was cracked!! (test pipe and y-pipe on the car) It's making rattling noisy!! I took my car to dealer and they ordered new muffler for me and it's under warranty!! I have no idea how that happend..
|
Quote:
|
Quote:
|
Quote:
|
So, it's safe to assume that if you have your stock cat on then you won't have breaking or cracking issues.
|
Quote:
|
im going on my second week with my new flex pipe and i have no issues knock on wood.
|
Quote:
|
Quote:
|
Im going to be putting on the new passenger side pipe that invidia sent me today, so far the drivers side flex joint has been fine and its the passenger side thats leaking.
|
Just saw this.... I had an issue with the weld on one of the flanges that connect to the cat; it was only welded half way around and had a massive leak. Not sure how they missed that, but they sent me a replacement pipe, and I have not had any issues in the 5000 miles since installing.
I also have a loose hanger that is rattling on one side. I am not sure if the Z exhaust is the same (I have a G37 sedan), but the hanger on the muffler is 2 pieces and the part that attaches to the car slides over the piece that attaches to the muffler. On one side there is a weld holding the 2 together, and the other side is missing the weld altogether. Again just looked like over-sight on their (QA?) part. Overall, the welds and quality look good, but I think, at least in my case, it was a QA issue. As mentioned, you get what you pay for. In the end, Invidia took care of the major issue, and at some point I will get a quick weld on the hanger to address the other issue. |
So i put the new pipe in that invidia sent me and its STILL leaking.. the new pipe apparently leaks as well lol.. big thumbs down to invidia..
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
hella cool lolz
|
All times are GMT -5. The time now is 07:05 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2