Do you have an OEM Nismo Exhaust?

cowzrul · 05-22-2010, 07:38 PM

Just installed an OEM Nismo Exhaust into my wife's 2010 Roadster. Before I even got out from underneath it I noticed the mounting rubber piece was stretched WAY more than the stock exhaust. I doubled checked everything and it was aligned, straight, and bolts tight. When I got out noticed that side is tight up against the bumper.

Is there a different size rubber piece for OEM Nismo exhaust compared to non-Nismo exhaust? Anybody who has installed an OEM Nismo have similar problem?

cowzrul · 05-22-2010, 07:49 PM

AK posted this up long ago. Last page states this: Make sure rubber mounts are not excessively stretched or twisted.

Mine is stretched big time.

370Z NISMO Exhaust Installation Instructions

cowzrul · 05-23-2010, 06:48 AM

Anybody?

tbonesteak · 05-23-2010, 08:22 AM

WOW..........i cannot believe this. I JUST installed my Nismo exhaust on Friday and am running into the EXACT same problem. The picture above is exactly how mine looks and my tips look identical to your picture as well. I literally loosened and tightened every nut and bolt 10 times in different sequence to see if that makes any difference. I also tried using a floor jack to manipulate the position of the muffler while i torqued everything down. No luck. I spent 6 hours on this project and just gave up and left it the way it is. I'm thinking of taking it to an exhaust shop to have it aligned. If anyone can chime in that'd be awesome. BTW, love the Nismo exhaust. Exactly what i was looking for. Someone please helppp!!!

cowzrul · 05-23-2010, 07:31 PM

I am calling the dealership tomorrow to see if the Nismo calls for a rubber piece in that spot.

tbonesteak · 05-23-2010, 11:04 PM

i doubt it....ive seen plenty of Nismos installed without using any extra Nismo parts...

tbonesteak · 05-24-2010, 07:56 PM

i just went to an exhaust shop and got it fixed. You need to detach that rubber hanger. The Nismo is set up a little differently and that bracket will not work. We took the hanger off and all was perfect. Super sturdy too.

cowzrul · 05-24-2010, 07:59 PM

Did they put anything in it's place?

tbonesteak · 05-25-2010, 01:07 AM

nope. definitely not necessary. it's super sturdy and wouldnt even budge. I LOVE this exhaust!!!!!!!

Fed Hill Z · 11-08-2010, 01:11 PM

Quote:

Originally Posted by cowzrul

I am calling the dealership tomorrow to see if the Nismo calls for a rubber piece in that spot.

I know this post is pretty old, but for anyone else looking to put an OEM NISMO on their non-NISMO Z, I contacted my dealership today and the part number for the Rear Insulator (rubber piece) is the same for a NISMO and non-NISMO.

Imperial · 11-12-2010, 01:45 AM

The rubber hanger on the driver side IS different on the Nismo from other models.

Fed Hill Z · 11-14-2010, 11:34 AM

Quote:

Originally Posted by Imperial

The rubber hanger on the driver side IS different on the Nismo from other models.

Just bought an OEM NISMO exhaust and installed yesterday. Rubber hanger is not different. The difference in NISMO vs. Sport/Base is a metal piece that extends the rubber hanger down lower than on a Sport/Base. See pics.

First pic is the NISMO with the rubber hanger and the metal piece that bolts to the underside of the car.

Second pic is the exhaust from my sport with the same rubber hanger but no metal piece. The rubber hanger in this case bolts to the same place as the hole on the metal piece on the NISMO exhaust.

Next pic is mount for the rubber hanger (sport) or metal piece (NISMO). The upper of the 2 holes in this case is a place for a little piece of the metal mount from NISMO to stick through to make sure it is aligned properly. Then bottom hole is for the bolt.

Last is the the NISMO bolted on to the car.

Jessobear · 11-15-2010, 07:07 AM

Thanks for the info. Anyone have the part number for that bracket and bolt?

Fed Hill Z · 11-16-2010, 11:29 AM

Quote:

Originally Posted by Jessobear

Thanks for the info. Anyone have the part number for that bracket and bolt?

I don't have the part number. It came with the exhaust I bought because it was not needed to mount the aftermarket one that the NISMO owner bought.

G Fo12ce · 11-16-2010, 01:22 PM

The rubber is the same. The Nismo has an extra extension mount on that left side hanger that drops it down (it's metal). I know because HKS made supplemental instuctions for Nismo owners for thier exhaust on my car showing to remove it. For a non-nismo you'll want to get that from the owner or buy one.

I have a PDF of the instructions from HKS but can't link it. If AK or someone wants to PM me I can email it so they can stick in here.

Here are some pics I took. It's been a while but I believe this is right. here you can see the standard mount (the first horizontal lip with half the nut showing on the upper part of the pic) Notice there is a second extension bracket bolted to it (second horizontal lip with nut). The second lower bracket is unique to the Nismo models:

Here's what it looks like with it off (which is what I'm sure all non-Nismo models look like stock):

Hope that helps.

Edit: Supplemental instructions attached.

05-22-2010, 07:38 PM	#1 (permalink)
cowzrul Base Member Join Date: May 2009 Location: Oklahoma Posts: 58 Drives: 2014 370z Rep Power: 15	Do you have an OEM Nismo Exhaust? Just installed an OEM Nismo Exhaust into my wife's 2010 Roadster. Before I even got out from underneath it I noticed the mounting rubber piece was stretched WAY more than the stock exhaust. I doubled checked everything and it was aligned, straight, and bolts tight. When I got out noticed that side is tight up against the bumper. Is there a different size rubber piece for OEM Nismo exhaust compared to non-Nismo exhaust? Anybody who has installed an OEM Nismo have similar problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 370 Nismo Exhaust	456ntripz	Parts for sale (Private Classifieds)	21	05-17-2010 08:46 AM
WTB: Nismo Exhaust	6spd	Wanted	2	02-09-2010 02:59 PM
LTB: Stock Nismo Exhaust off a Nismo whos upgrading	chuckd05	Parts for sale (Private Classifieds)	5	12-03-2009 08:53 PM
Nismo S-Tune Exhaust (15-5850) vs. Nismo H-Pipe Config Exhaust	scruffydog	Intake/Exhaust	7	07-17-2009 06:33 PM
NISMO Exhaust	355890	Intake/Exhaust	22	05-04-2009 01:49 PM

05-22-2010, 07:49 PM	#2 (permalink)
cowzrul Base Member Join Date: May 2009 Location: Oklahoma Posts: 58 Drives: 2014 370z Rep Power: 15	AK posted this up long ago. Last page states this: Make sure rubber mounts are not excessively stretched or twisted. Mine is stretched big time. 370Z NISMO Exhaust Installation Instructions

05-23-2010, 06:48 AM	#3 (permalink)
cowzrul Base Member Join Date: May 2009 Location: Oklahoma Posts: 58 Drives: 2014 370z Rep Power: 15	Anybody?

05-23-2010, 08:22 AM	#4 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	WOW..........i cannot believe this. I JUST installed my Nismo exhaust on Friday and am running into the EXACT same problem. The picture above is exactly how mine looks and my tips look identical to your picture as well. I literally loosened and tightened every nut and bolt 10 times in different sequence to see if that makes any difference. I also tried using a floor jack to manipulate the position of the muffler while i torqued everything down. No luck. I spent 6 hours on this project and just gave up and left it the way it is. I'm thinking of taking it to an exhaust shop to have it aligned. If anyone can chime in that'd be awesome. BTW, love the Nismo exhaust. Exactly what i was looking for. Someone please helppp!!!

05-23-2010, 07:31 PM	#5 (permalink)
cowzrul Base Member Join Date: May 2009 Location: Oklahoma Posts: 58 Drives: 2014 370z Rep Power: 15	I am calling the dealership tomorrow to see if the Nismo calls for a rubber piece in that spot.

05-23-2010, 11:04 PM	#6 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	i doubt it....ive seen plenty of Nismos installed without using any extra Nismo parts...

05-24-2010, 07:56 PM	#7 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	i just went to an exhaust shop and got it fixed. You need to detach that rubber hanger. The Nismo is set up a little differently and that bracket will not work. We took the hanger off and all was perfect. Super sturdy too.

05-24-2010, 07:59 PM	#8 (permalink)
cowzrul Base Member Join Date: May 2009 Location: Oklahoma Posts: 58 Drives: 2014 370z Rep Power: 15	Did they put anything in it's place?

05-25-2010, 01:07 AM	#9 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	nope. definitely not necessary. it's super sturdy and wouldnt even budge. I LOVE this exhaust!!!!!!!

11-12-2010, 01:45 AM	#11 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	The rubber hanger on the driver side IS different on the Nismo from other models.

11-15-2010, 07:07 AM	#13 (permalink)
Jessobear Base Member Join Date: Oct 2010 Location: Washington, DC Posts: 201 Drives: '10 370Z Tour/Sp M6 Rep Power: 14	Thanks for the info. Anyone have the part number for that bracket and bolt?