Any update on these? Are they off the boat yet?

Sorry for the delay. Just got word all our backorders and some of their stock is coming in late this month. So about 3 weeks or so.

If anyone can post a review when they install it that'd be awesome :)

These look like replica topspeed / beluga axel back ...sound about the same as well

I cant say much about the quality of those brands, but at the very least Remark offers a Lifetime Warranty on manufacturer defects. They also use 16 gauge T304 Stainless Steel. As for it being a replica, from the outside it "looks" the same, since there are only so many different ways to design axle-backs for these vehicles. Here are some closeups to show the quality of these axle-backs.

https://cdn.shopify.com/s/files/1/14...g?v=1557265524
https://cdn.shopify.com/s/files/1/14...g?v=1557265524
https://cdn.shopify.com/s/files/1/14...g?v=1557265524

Got my set yesterday for my 2018 AT base model. Arrived at 3:00 pm and had them on the car by 3:45 pm. Quality is excellent, fit is absolutely perfect and the sound is wonderful. Serious low rumble at idle, powerful hum when cruising at highway speed, and real growl when accelerating. I am totally happy with the purchase and ease of install. I selected the burned double wall tips and they look magnificent!!!

Skidro

Mine will be delivered today! I will try to do some pictures and sound comparison between stock nismo and these.

Post some pics! I am sure everyone wants to see ;)

:iagree::iagree:

Received and installed!

Total time: ~45 minutes

The axle-back was well packaged, with sturdy box and foam packaging material where needed.

The install is pretty straight forward, however the included hardware bolts/nuts and rubber hangers were not used. In my car at least the stock bolts were welded in place so i had to reuse those, and the rubber hanger piece was also not needed (no way to mount them) and the stock ones were reused. I did use the included gaskets.

The hardest part was loosening everything, the nuts were on pretty tight and I had to use a breaker bar, also the rubber hangers required a bit of elbow grease to remove the stock exhaust. The tips are about 3-5mm more inward than the stock tips, nothing noticeable. I believe this is only on Nismo.

Make sure to use proper safety gear for your hands and eyes.

Pictures:

Photos Album
http://s349.photobucket.com/user/Car...Back%20Exhaust

Sound: It is a very nice low/growly sound. Does not drone at all at any RPM and is actually very stock-ish sounding at cruising speeds. It is however very loud and aggressive under acceleration and fits the car perfectly. Very happy I got these, I think they are perfect for the car and the way the car should have sounded from factory.

Stock Nismo Exhaust
https://youtu.be/nkSG2iHrldk

Remark Axle Back Exhaust
https://youtu.be/ClhQwbgmz88

Driving Around with Remark Axle Back: At 1:28 I rolled the Windows up, later on I Rolled back down. Phone was recording from cup holder.
https://youtu.be/9aPKrnAZHbc

Great reviews! Thx for posting.

Did you guys notice any change in power/torque?

I know its difficult to tell with just the butt dyno, but Im intetested.

The car seems a bit more "peppy", but it could be perception due to me pushing the pedal a little harder to hear the exhaust note.

Sorry guys I cannot post pics as I do not own a camera or a cell phone (yeah, old timer caveman)!!!! I really cannot tell if there is a power increase, but it certainly does not feel slower either. Just a really fine and well made system and I love it :rock:

With the reviews and kamispeed having them in stock...i just placed an order. The wait begins.


Sent from my Pixel 3a using Tapatalk