R2C PF10544 Black Hex drop in air filter

GZ3 · 09-21-2015, 07:04 PM

Quote:

Originally Posted by Zilverz

you know they are nuclear easy taking in and out, i probably will adopt your method and do a tap on them too

Its a great way to keep em clean all the time. Its crazy how well these filters flow, ive been thinking of dyno time but already put an exhaust so gains wont reflect only

Wheels3309 · 09-25-2015, 01:22 PM

Alright... payday! Just placed my order! Can't wait to drop these babies in!

GZ3 · 09-25-2015, 02:26 PM

Add some post maf tubes and your golden!

JARblue · 09-25-2015, 02:28 PM

Nice! I did not realize that R2C made drop ins

I've been running their intakes for three years now. I got a set of the black hex filters that I purchased when they released them a while back (maybe ~1 year?).

FWIW, I've never felt like blowing air in/on them cleaned them out very well. So I always wash them in a bucket of water with some Simple Green. Since I now have two sets, I can let them air dry for several days before storing them.

BuckeyeZ · 09-25-2015, 02:36 PM

Quote:

Originally Posted by Zilverz

Completely stock Z going from oem paper to these R2Cs

I personally removed the R2C logo in the top left corner. R2C told me it would be fine just be careful of the urethane and media. they also said that they tested it with and without it and were getting 400 scfm. my alien brain wanted to remove it though and not have it in there. it is a thin piece of metal with a dab of glue behind it. you can take a small razor under the urethane if you want and i used a steak knife gently prying in the center and got it off in under 5 minutes each.

Can't understand why a company would put a logo right there blocking the air flow. It defeats part of the purpose of the better flowing filter!! It is not like anyone is ever going to see the logo anyway. SMH.

Glad to see you came-up with a way to remove it and get the entire benefit of the filter.

GZ3 · 09-25-2015, 04:30 PM

Quote:

Originally Posted by BuckeyeZ

Can't understand why a company would put a logo right there blocking the air flow. It defeats part of the purpose of the better flowing filter!! It is not like anyone is ever going to see the logo anyway. SMH.

Glad to see you came-up with a way to remove it and get the entire benefit of the filter.

Yea that plaque just doesnt belong there. I spoke with r2c yesterday and they did confirm that flow is completely unaffected. Good thing is its very small and easy to take off

GZ3 · 09-25-2015, 04:31 PM

Quote:

Originally Posted by JARblue

Nice! I did not realize that R2C made drop ins

I've been running their intakes for three years now. I got a set of the black hex filters that I purchased when they released them a while back (maybe ~1 year?).

FWIW, I've never felt like blowing air in/on them cleaned them out very well. So I always wash them in a bucket of water with some Simple Green. Since I now have two sets, I can let them air dry for several days before storing them.

Exactly what i do! Except i used dawn liquid soap last time. The filters dry so fast too. R2c ftw

Wheels3309 · 09-28-2015, 11:25 AM

Quote:

Originally Posted by GZ3

Add some post maf tubes and your golden!

Yeah, been contemplating those... having difficulty justifying another $100 for what most say is a negligible difference at best. I guess I'll see how she feels with the drop-ins and go from there!

GZ3 · 09-28-2015, 04:57 PM

Quote:

Originally Posted by Wheels3309

Yeah, been contemplating those... having difficulty justifying another $100 for what most say is a negligible difference at best. I guess I'll see how she feels with the drop-ins and go from there!

there are dynos that show about a solid 5-6rwhp gain. I posted some and jordo did as well as a few others. For me the biggest benefit of the maf tube was the throttle response...the Z was a little boggy at certain speeds, not any more. Seems to just want to keep going.

Wheels3309 · 09-28-2015, 05:01 PM

Quote:

Originally Posted by GZ3

there are dynos that show about a solid 5-6rwhp gain. I posted some and jordo did as well as a few others. For me the biggest benefit of the maf tube was the throttle response...the Z was a little boggy at certain speeds, not any more. Seems to just want to keep going.

Cool... Good to hear. I'll check those out.... Might just end up pulling the trigger...

Sent from my iPhone using Tapatalk

Wheels3309 · 09-30-2015, 10:00 PM

Quote:

Originally Posted by GZ3

Add some post maf tubes and your golden!

Done. Just placed my order for a pair of Red HPS tubes!

They'll really compliment the Black Hex's I just installed tonight!

Thx for pushing me to look into it more GZ3!

GZ3 · 10-01-2015, 09:29 AM

Quote:

Originally Posted by Wheels3309

Done. Just placed my order for a pair of Red HPS tubes!

They'll really compliment the Black Hex's I just installed tonight!

Thx for pushing me to look into it more GZ3!

NP man, this combo is proven for 10-12 solid rwhp!

how did you like the filters

Wheels3309 · 10-05-2015, 11:48 AM

Quote:

Originally Posted by GZ3

NP man, this combo is proven for 10-12 solid rwhp!

how did you like the filters

Only driven her 3 times since putting the filters in but I can definitely notice a difference... a bit more throttle response and it seems to rev smoother

Tubes should be here Thursday!

ColemanLee09 · 02-22-2016, 06:32 PM

Installed mine today and the butt dyno shows increase. Filters looked ready for replacement anyways. As for sound, no difference as my catback muffles any sound there is.

Kzonts · 05-12-2016, 06:35 PM

I've been trying to buy these and can't find them in stock anywhere. I placed an order over 6 weeks ago and still waiting.

09-25-2015, 01:22 PM	#17 (permalink)
Wheels3309 Enthusiast Member Join Date: Mar 2015 Location: Syracuse, NY Posts: 301 Drives: 2015 370Z Nismo 7/AT Rep Power: 11	Alright... payday! Just placed my order! Can't wait to drop these babies in! GZ3 likes this.

09-25-2015, 02:26 PM	#18 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 22	Add some post maf tubes and your golden! Wheels3309 likes this. __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

09-25-2015, 02:28 PM	#19 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Nice! I did not realize that R2C made drop ins I've been running their intakes for three years now. I got a set of the black hex filters that I purchased when they released them a while back (maybe ~1 year?). FWIW, I've never felt like blowing air in/on them cleaned them out very well. So I always wash them in a bucket of water with some Simple Green. Since I now have two sets, I can let them air dry for several days before storing them. GZ3 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-22-2016, 06:32 PM	#29 (permalink)
ColemanLee09 Base Member Join Date: Feb 2015 Location: NorCal Posts: 149 Drives: Z34 Rep Power: 11	Installed mine today and the butt dyno shows increase. Filters looked ready for replacement anyways. As for sound, no difference as my catback muffles any sound there is. Wheels3309 likes this. __________________ 09 370Z Sport 6MT Chicane Yellow Powertrix \| Swift \| SPL \| SPC \| Fast Intentions \| Berks \| Stillen \| Z1 \| Setrab \| Mocal \| H&R \| TWM \| RJM \| Sparco \| Buddy Club \| Tanabe \| GaleForce \| EVO-R \| ZSpeed \| Pioneer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] k&N drop in air filter	bri	Parts for sale (Private Classifieds)	7	10-30-2014 02:42 AM
HKS Drop-In intake filter went bad	GEMu	Intake/Exhaust	13	01-05-2014 08:45 AM
m7 Drop in Filter	innovate370	Intake/Exhaust	9	06-10-2013 09:29 PM
[FOR SALE] K&N Drop in Filter Pair	bonfire	Parts for sale (Private Classifieds)	2	06-21-2012 08:33 AM
[FOR SALE] 370z K&N drop in filter x 2 - $60	atl370z	Parts for sale (Private Classifieds)	1	04-26-2011 08:25 PM

05-12-2016, 06:35 PM	#30 (permalink)
Kzonts Track Member Join Date: Mar 2015 Location: Greenville, SC Age: 62 Posts: 891 Drives: 2019 Roadster Rep Power: 200742	I've been trying to buy these and can't find them in stock anywhere. I placed an order over 6 weeks ago and still waiting.