Nissan 370Z Forum - Ported Lower Manifold @Synergy Composites

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Intake/Exhaust (http://www.the370z.com/intake-exhaust/)

- - Ported Lower Manifold @Synergy Composites (http://www.the370z.com/intake-exhaust/101963-ported-lower-manifold-synergy-composites.html)

Trilitheum

03-30-2015 06:54 PM

Yes, there should also be little blue dots on one side, that is the side that should face out. You will need two of those multilayer metal gaskets (one for each side).

You can see the two gaskets in this picture, also when putting the manifold back in there is a two step torque sequence, should make sure to follow the service manual torque pattern.

http://i1311.photobucket.com/albums/...psuvxrpy17.jpg

Asheth

04-15-2015 03:54 AM

In for sub

ANMVQ

04-22-2015 07:02 AM

Quote:

Originally Posted by Boss_302 (Post 3154554)

So here's a question on lower intake manifold gaskets, Since I never R&R a 370z intake.
The gasket's that I received from Nissan Parts over the net. came as 3 metal gaskets together riveted at the bottom. So is this a composite metal gasket? What I thought I was purchasing was a gasket set like every other normal V-8 I've worked on.
Can someone please enlighten me before I take this apart.

I would get them, I did I ported my lower and installing it on May 15th, with before and after dyno runs

Japanjay

04-22-2015 01:44 PM

I hope you make some gains because I should be getting mine back from shawn a few weeks after you dyno.

All times are GMT -5. The time now is 06:14 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page