|
GROUP BUY: Jim Wolf Technology C2 Cam set
MA-Motorsports Exclusive Product http://www.ma-motorsports.com/wp-con...WTC2370Z-1.jpg The all New Jim Wolf Technology exhaust camshafts for your VQ37VHR offer a 271 Degree Duration with 11.7mm of Max Lift. Jim Wolf Technology has produced these exhaust camshafts to increase mid-range torque as well as top end horsepower. With supporting modifications , these camshafts can add upwards of 36 peak Horsepower and 22ftlb of torque. Due to their well designed VVEL system, the intake camshaft is not necessary to upgrade. Included in the Kit: JWT Exhaust Camshaft (2) JWT High RPM Valve Spring (12) JWT Valve Spring Shim (12) JWT Extended Cam Sprocket Bolts (2) JWT Cam Sprocket Bolt Washer (2) JWT Rear Camshaft Bolt (2) JWT Cam Bolt Seal – Copper (2) Dyno Graph showing the Before and After comparison on the camshaft install. http://www.ma-motorsports.com/wp-con...2205604352.jpg Dyno Graph showing the cam install Vs Stock 370Z http://www.ma-motorsports.com/wp-con...2205576963.jpg This group buy will be for 10 buyers, payment will be due once we have 10 people committed to order. If we are able to go over 10 quickly, I will look into better pricing at 20 sets. Retail is $849 Shipped Group buy price at 10 sets is $739 Shipped to the lower 48 states. 1. SRJ ---- PAID 2. Eddie Rivera. (FB) ---- PAID 3. sic6spd370z (Auh Ce FB) 4. Tommy D'Anna (FB) ---- PAID 5. Mark Kolosvary (FB) ---- PAID 6. ChrisRam 7. Carlos Aguilar (FB) ---- PAID 8. andy_meng1024 x2 ---- PAID 9. TOKSICK 10. Carbon 11. Jake J. x2 ---- PAID PM me or Post here to add your name. Thanks! |
Oh man if I knew I could have saved 110$ I would have waited ��
|
Is there an option if you just want the camshafts? Lets say for those that already have the C1 cams and already have all the springs, shims, bolts, and what-not.
|
Quote:
Shoot me a PM, we can work out an option for you! -Daelen |
Quote:
Next time you need something let me know, ill try to help make up some of that! -Daelen |
No worries my parts are coming in pretty quick here so i might pull the trigger and get it done this year..
Quote:
|
im waiting for a v1 and v2 comparison before i pull the trigger
|
i think its pretty clear by the dynos.. C1 cams make more TQ and C2 cams Make more Horsepower
|
numbers to compare too are still good to have
|
read through this thread numbers posted
http://www.the370z.com/engine-drivet...ts-inside.html Broken down here C1 cam This car baselined at 298hp and 227tq (This was after an uprev tune, on a motor with a cat back and intake) after the cams the motor produced 309.5hp 258tq to the wheels. So the real star of this was the torque increase in the midrange as that is very noticeable when behind the wheel. C2 cam With a baseline power of 268whp and 219ftlb, and a final number of 305whp and 241ftlb the gains were very impressive. |
Sadly we switched our dyno since we have last done a C1 set, im going to try and get a car in here to do a run with and have accurate info!
^taken from the thread |
you wanted number to compare.. yes dynos are different so its a estimate between them.. either you want low in TQ or upper end HP
|
BUMP.
Our local customer with the C1 cams has not been able to stop by yet, but it is in the plans. |
I'm in.
|
I'm interested.
|
Halfway there, let me know if you would like to be added!
|
any benefit for the boosted guys ?
|
Quote:
Would you like me to add you to the list? |
Quote:
|
Quote:
Short answer, yes. Long answer, we have 2 engines being built right now for two different high power turbo cars. Based on previous experience, we expect to see an improvement in spool times, the ability to flatten the torque curve for much longer in the power band, and the ability to keep making power above stock redline (With the needed parts added) |
What about HP? How many hours to install these?
Quote:
|
I'm in.
|
Quote:
|
Quote:
Correct. |
Quote:
HP gains are on the dyno graph in the first post. Install hours will vary depending on exact parts changed at the time of install. For a running driving car with the engine still in it, install time is between 22-29hrs depending on parts used. |
Quote:
Added! |
I'm in, too! :happydance:
|
We just need 2 more to get this going!
|
9/10
Just need one more person to put this through! |
Im interested
|
im in, but im unsure of c1 or c2
|
Quote:
Quote:
-Daelen |
Sending out payment info now, for anyone that said they were interested but never comitted, I will PM you also to give you a final chance to join!
|
Quote:
|
Quote:
No problem! Just wanted to make sure everyone interested got a shot! |
I just got the tracking number. Who has install instructions?
|
Is this still open? Im interested if shipping is available to Canada?:tiphat:
|
Interested. :tiphat:
|
Any more follow-up install results of these?
|
interested.
|
| All times are GMT -5. The time now is 10:33 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2