Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Group Buys (http://www.the370z.com/group-buys/)
-   -   You asked, and we delivered! RPM Roll bar Group Buy! (http://www.the370z.com/group-buys/106556-you-asked-we-delivered-rpm-roll-bar-group-buy.html)

MAMotorsports 08-13-2015 03:20 PM

You asked, and we delivered! RPM Roll bar Group Buy!
 
Hey Guys,


A few of you have expressed interest in a group buy so me and RPM got together to work something out for you all!


http://www.rpmrollbar.com/images/pop...370z/370-1.jpg


Below are the options they list



370Z 08+ Roll Bar
Retail Prices:
Chromoly $1995.00 With free shipping to the lower 48 states
Mild Steel $1195.00 + Shipping to the lower 48 states (Normally around $200)


Please note that .095CM is used for SCCA/NASA rollbars and .083CM is for drag racing. All of the below prices reflect our standard Five point roll bar and standard choice of powder coat colors. If you want just a four point bar, your price will be based off the 5 point tier as the bar will include the SCCA diagonal bar as part of the four point. If you do not want the SCCA bar deduct the SCCA tier from the bar price.

SCCA/NASA Style Bar $200.00

SCCA style bars as removable for an additional $250 and we can do this for the shoulder bar as well for $180 (Discounts do not apply)

6 Point Add on $350.00


Seat Back Rest $249.95

http://www.rpmrollbar.com/images/img...atback_adj.jpg

Door Bar Holders $49.95
http://www.rpmrollbar.com/images/door-bar2.jpg

Hydro Dip, and Color matching are also available.


Seat Belt Kit
http://www.rpmrollbar.com/images/img...t_brackets.jpg


We will start the Group buy off at 5, with that we will do 5% off the retail price and include a FREE Seat belt kit. If I can get more than 5 I would be more than happy to work with RPM about some more deals and a deeper discount!
  • 1 KevinN
  • 2
  • 3
  • 4
  • 5

Once I get 5 Confirmed buyers, we will need payment from all 5 to get the order going.

Additional Photos:
http://www.rpmrollbar.com/images/pop...370z/370-2.jpg
http://www.rpmrollbar.com/images/pop...370z/370-3.jpg
http://www.rpmrollbar.com/images/pop...370z/370-4.jpg
http://www.rpmrollbar.com/images/pop...370z/370-5.jpg
http://www.rpmrollbar.com/images/pop...370z/370-6.jpg
http://www.rpmrollbar.com/images/pop...370z/370-7.jpg
http://www.rpmrollbar.com/images/pop...370z/370-8.jpg
http://www.rpmrollbar.com/images/pop...370z/370-9.jpg
http://www.rpmrollbar.com/images/pop...70z/370-10.jpg
http://www.rpmrollbar.com/images/pop...70z/370-11.jpg

carlitos_370z 08-14-2015 06:50 AM

subscribed :drool:

zmanelite 08-14-2015 07:57 AM

As much as I love the look for daily driving it looks like it would be a b!tch

A orange one would look cool *** hell in my car tho

MAMotorsports 08-14-2015 08:38 AM

Quote:

Originally Posted by zmanelite (Post 3284911)
As much as I love the look for daily driving it looks like it would be a b!tch

A orange one would look cool *** hell in my car tho



What part are you thinking will cause an Issue? With the Door bars pulled out I don't think it would be much of an issue at all for a Daily!

carlitos_370z 08-14-2015 08:38 AM

Quote:

Originally Posted by zmanelite (Post 3284911)
As much as I love the look for daily driving it looks like it would be a b!tch

A orange one would look cool *** hell in my car tho

:iagree::iagree::iagree:

when i ordered mine in it would be in red... then red wheels and i have a damn 370z RS :stirthepot: hell yeah a Porsche GT3 RS... Z :bowrofl::bowrofl::bowrofl::bowrofl:

zmanelite 08-14-2015 08:47 AM

Quote:

Originally Posted by MAMotorsports (Post 3284950)
What part are you thinking will cause an Issue? With the Door bars pulled out I don't think it would be much of an issue at all for a Daily!

So for DD can you just roll with the bars out ?

MAMotorsports 08-14-2015 09:03 AM

Quote:

Originally Posted by carlitos_370z (Post 3284951)
:iagree::iagree::iagree:

when i ordered mine in it would be in red... then red wheels and i have a damn 370z RS :stirthepot: hell yeah a Porsche GT3 RS... Z :bowrofl::bowrofl::bowrofl::bowrofl:

:woot:


http://www.the370z.com/attachments/e...l-bar-rb-1.jpg (Picture is huge lol)

Quote:

Originally Posted by zmanelite (Post 3284958)
So for DD can you just roll with the bars out ?


Pull the pin up top, and the bolt on the bottom and they pop right out!

No issues at all with that.

http://www.rpmrollbar.com/images/pop...370z/370-9.jpg

carlitos_370z 08-14-2015 09:28 AM

Daaaaaamn you just kick my face with that pic :drool: i love it.... can you give me a quote of that same roll bar in mid still ($1,195.00. option)... just to start saving hhahahaa!! well i hope you can shipped to Puerto Rico...

MAMotorsports 08-14-2015 12:24 PM

Quote:

Originally Posted by carlitos_370z (Post 3284987)
Daaaaaamn you just kick my face with that pic :drool: i love it.... can you give me a quote of that same roll bar in mid still ($1,195.00. option)... just to start saving hhahahaa!! well i hope you can shipped to Puerto Rico...




Shot you a PM!

carlitos_370z 08-14-2015 12:48 PM

Quote:

Originally Posted by MAMotorsports (Post 3285123)
Shot you a PM!

thanks lot bro!!! :)

Meulen 08-14-2015 12:54 PM

I'm intrigued so sub'd, but man I would not like to cut into my interior

carlitos_370z 08-14-2015 01:16 PM

Quote:

Originally Posted by Meulen (Post 3285143)
I'm intrigued so sub'd, but man I would not like to cut into my interior

:iagree:

MAMotorsports 08-14-2015 02:30 PM

Quote:

Originally Posted by Meulen (Post 3285143)
I'm intrigued so sub'd, but man I would not like to cut into my interior


I can see how much the rear panel is from Nissan, and make that an option so you don't have to cut the stock one.


Not much I can do as far as the carpet goes sadly, its the price to pay for safety!

Carbon_z 08-14-2015 02:34 PM

Are you still making the smaller bar for harnesses?

MAMotorsports 08-14-2015 02:45 PM

Quote:

Originally Posted by Carbon_z (Post 3285249)
Are you still making the smaller bar for harnesses?



That I am, we have a car scheduled to come in next week to do some more test fitting on a bar that works with stock belts. Will update the thread then for those of you interested!

carlitos_370z 08-14-2015 07:25 PM

Quote:

Originally Posted by MAMotorsports (Post 3285247)
I can see how much the rear panel is from Nissan, and make that an option so you don't have to cut the stock one.


Not much I can do as far as the carpet goes sadly, its the price to pay for safety!

Sounds good

Quote:

Originally Posted by MAMotorsports (Post 3285253)
That I am, we have a car scheduled to come in next week to do some more test fitting on a bar that works with stock belts. Will update the thread then for those of you interested!

Awesome! Want to see pics of that too :tup:

Rusty 08-14-2015 11:08 PM

I want to get in this group buy. But have to wait until next Jan. Have to see what my finances are after I retire on 1/1/16. :D

MAMotorsports 08-18-2015 09:15 AM

All PMs replied to!

MAMotorsports 08-18-2015 03:38 PM

All PMs replied to!!

KevinN 08-19-2015 03:59 AM

Put me down on the list please

MAMotorsports 08-19-2015 08:19 AM

Quote:

Originally Posted by KevinN (Post 3288797)
Put me down on the list please


Done!


Anyone else want me to put there name in?

MAMotorsports 08-19-2015 12:57 PM

All PMs replied to!

MAMotorsports 08-24-2015 11:31 AM

All weekend PMs replied to!

derraj06 08-25-2015 12:05 AM

Do you have an approximate weight for the setup? Just curious how much it will add to the car. If the harness bar doesn't work out, I may go this route. As the car gets faster I will need this anyway.

MAMotorsports 08-25-2015 02:05 PM

Let me get with RPM and see if they have a weight!


-Daelen

MAMotorsports 08-26-2015 03:41 PM

ALL PMs Replied to!

TerribleONE 08-26-2015 03:51 PM

Also curious about how much it weighs

binary0x01 08-26-2015 05:19 PM

I'd like to know the weight and install labor cost (approximate ofcourse min/max give or take etc) for a shop to do this so I can either decide to do this myself or have someone else get it done.

Thanks.

ban25 08-27-2015 12:20 AM

Subscribed.

I need to do some research, but I am interested in the group buy. Will let you know when I'm ready to pull the trigger.

MAMotorsports 08-27-2015 11:54 AM

Quote:

Originally Posted by derraj06 (Post 3293190)
Do you have an approximate weight for the setup? Just curious how much it will add to the car. If the harness bar doesn't work out, I may go this route. As the car gets faster I will need this anyway.

The weight will vary on exact options, but a standard 4 point is as follows:

46lbs in Mild Steel
20lbs in Chromoly

Quote:

Originally Posted by TerribleONE (Post 3294452)
Also curious about how much it weighs

Quote:

Originally Posted by binary0x01 (Post 3294493)
I'd like to know the weight and install labor cost (approximate ofcourse min/max give or take etc) for a shop to do this so I can either decide to do this myself or have someone else get it done.

Thanks.

46lbs in Mild Steel
20lbs in Chromoly

Install labor should be 8-10hrs from a shop on average.

Quote:

Originally Posted by ban25 (Post 3294693)
Subscribed.

I need to do some research, but I am interested in the group buy. Will let you know when I'm ready to pull the trigger.

Let me know if you have any questions!


-Daelen

ban25 08-27-2015 02:06 PM

Quote:

Originally Posted by MAMotorsports (Post 3295103)
Let me know if you have any questions!

-Daelen

What does it look like shipped? I'm thinking I would probably need to have it shipped to a shop directly for installation.

derraj06 08-27-2015 04:32 PM

Good to know on the weights.

I shopped this around locally and one experienced race shop said that they wouldn't build in chromoly due to safety reasons. Given your experience in cage building, is that a legitimate concern or a marketing ploy by them? 26lb weight savings is very attractive for this.

MAMotorsports 08-28-2015 09:07 AM

Quote:

Originally Posted by ban25 (Post 3295235)
What does it look like shipped? I'm thinking I would probably need to have it shipped to a shop directly for installation.


Shipping in the lower 48 will normally be around $200.00

Quote:

Originally Posted by derraj06 (Post 3295369)
Good to know on the weights.

I shopped this around locally and one experienced race shop said that they wouldn't build in chromoly due to safety reasons. Given your experience in cage building, is that a legitimate concern or a marketing ploy by them? 26lb weight savings is very attractive for this.


There has been some debate about this over the years, honestly chromoly is just fine in most race applications for cages. There are some extreme cases where people use a mixture of the two for different areas but that is really not needed 99% of the time.

All in all. Chromoly is fine.


-Daelen

MAMotorsports 08-31-2015 10:10 AM

All PMs replied to!

MAMotorsports 09-02-2015 03:13 PM

All PMs Replied to! Would like to keep this open for another 2 weeks to get enough people, so please let me know if you would like to get on the list

MAMotorsports 09-03-2015 11:36 AM

All PMs responded to!

MAMotorsports 09-08-2015 02:49 PM

Hope you all had an awesome holiday weekend!

MAMotorsports 09-10-2015 12:17 PM

Why buy from MA-Motorsports? With over 15 years in the performance aftermarket industry MA Motorsports is proud to be a top tier provider for 1000’s of High Quality brand name performance products. From dedicated championship winning race car preparation and maintenance to high performance street cars. We have hand our hands in a very wide variety of builds, and we love to pass the knowledge we have gained with this onto our customers.

What do we do differently? In a day and age where buying a part for your car is as simple as typing it into google and clicking the top link, it is hard to set yourself apart from the next guy. We here at MA-Motorsports strive to provide the industry’s top customer service, whether you want to build a twin turbo monster, or have a question on what oil to run, we are here to help. You will find that our service does not end with the sale, we are here to help guide you wherever you would like to take your automotive journey, with build plans, and helping you find the best possible way to reach those goals!

We are HONEST, we are not here to sell you products you do not need, or services you cannot benefit from. We believe that having standards and morals is a huge part of this industry, a car does not leave our shop unless we feel it has been built to the best of our abilities, and the same goes for the parts that we sell. We do not deal with manufacturers we do not trust, or have not used. If we can not 100% stand behind a product, we do not sell it, simple as that. So you can TRUST we are here for you, our customer.

MAMotorsports 09-14-2015 08:22 AM

Monday Bump!

DarkJak 09-16-2015 04:04 PM

I'm interested! How does the bar affect headroom though? It looks like the headrests are pressing against them. Will I be limited in how much I can most the seat back?


All times are GMT -5. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2