Nissan 370Z Forum - Stillen SC + FrozenBoost HE + Oil Cooler?

Page 2 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Stillen SC + FrozenBoost HE + Oil Cooler? (http://www.the370z.com/forced-induction/93803-stillen-sc-frozenboost-he-oil-cooler.html)

ANMVQ

09-19-2014 10:16 AM

Bout time!! Ahahah

diego@vossen

09-19-2014 10:17 AM

Quote:

Originally Posted by ANMVQ (Post 2971299)

Bout time!! Ahahah

Thanks man. Now I need lines and fittings :driving:

Chuy	09-20-2014 11:07 AM

Damn it sounds like its the new "cool" thing to do! Ha see what i did there (corney I know)

niko86

10-20-2014 03:08 PM

What type of AN fittings do you guys use?

diego@vossen

10-20-2014 03:40 PM

Frozenboost upgrade is a must. 1 longer hose, 2 new fittings, cut tow hook off and relocated oil cooler. All worth it :)

https://farm3.staticflickr.com/2946/...f65e12c2_b.jpg

ANMVQ

10-20-2014 03:51 PM

Yea man!!

niko86

10-25-2014 03:13 PM

Did you guys use AN fittings with the Frozenboost Cooler?
If so, what size would fit the Stillen IC.
I am thinking about replacing all of the rubber hose with AQP braided AN hoses.

TKomodo

02-06-2015 08:41 AM

Will this fit behind a factory 370 bumper?

JWillis72

02-06-2015 08:49 AM

The thick one might not but I would think you could get the thin one to fit depending out what all you have in front of the radiator.

EliteXpress

02-06-2015 12:25 PM

The thick one will fit, just have to trim your bumper out a little.

future370zzz

02-06-2015 05:37 PM

Good stuff. This is my next mod.

octet

02-22-2015 12:31 PM

Guys, what fittings and hoses are required for the Stillen SC and FrozenBoost, anyone has a detailed list please?

Thanks!

mikey1600

02-22-2015 09:35 PM

Quote:

Originally Posted by octet (Post 3119107)

Guys, what fittings and hoses are required for the Stillen SC and FrozenBoost, anyone has a detailed list please?

Thanks!

you can use the same hoses that came with the stillen kit, I took my core to a fittings shop to get the right pieces, pretty sure they were just 5/8th fitting's.

swiss370Z

02-22-2015 10:26 PM

https://www.frozenboost.com/water-to...er-p-1026.html

•Water inlet and outlet are 1/2" NPT female threads, just like most air to water intercoolers.

Hope that helps

TKomodo

02-23-2015 02:04 PM

Quote:

Originally Posted by niko86 (Post 3012311)

Did you guys use AN fittings with the Frozenboost Cooler?
If so, what size would fit the Stillen IC.
I am thinking about replacing all of the rubber hose with AQP braided AN hoses.

AN-10 is what is on mine

All times are GMT -5. The time now is 11:54 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page