Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Help please GTM Supercharger install question. (http://www.the370z.com/forced-induction/70590-help-please-gtm-supercharger-install-question.html)

pokeyl 05-14-2013 11:31 PM

Quote:

Originally Posted by Mike@GTM (Post 2316030)
The bypass valve needs to be open at idle since the throttles are closed (high vacuum in the manifold) and the supercharger is trying to force more air into the engine. The bypass valve operates on a pressure differential between the charge pipe and the manifold. The higher the differential pressure, the more the valve will open. It is operating correctly. Also, if the belt were to fail, the supercharger would stop turning and therefore would no longer be pressurizing the charge pipe, the pressure differential between the intake manifold and the charge pipe would be less than the spring pressure in the bypass valve and the valve will stay closed.

Putting a stiffer spring in the bypass valve will cause compressor surge since the charger would be trying to move a small amount of air at very high pressure ratios. Bad idea.

The reason why a blow off valve on a turbo is closed at idle is simply due to the fact that at such low exhaust gas flow, the turbocharger is not spinning fast enough to even generate positive boost pressure at idle.

OK

pokeyl 05-18-2013 05:36 PM

Next question, seem I had more boost after the install than now, had 11, and now 9-10. I know the temp has an effect. I just checked all the clamps in the charge system and I did manage to tighten 4 of them. Not alot but a small leak would loose alot of pressure???

Car runs perfect and hits A/F targets, 10 degree temp rise

How tight do yuo run your clamps?

Baer383 05-18-2013 07:40 PM

You hava pma!!!

pokeyl 05-18-2013 10:40 PM

Quote:

Originally Posted by baer383 (Post 2321892)
you hava pma!!!

pma????

GaleForce 05-18-2013 11:06 PM

Quote:

Originally Posted by pokeyl (Post 2322082)
pma????

Private message answer


All times are GMT -5. The time now is 09:11 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2