Or to lower it LITERALLY! lol

No question, it's epic.


But is it FUN?

Turns out these are 7" like mine... Just an FYI...:tiphat:
CA Work Rezax II 19x10/19x12 -30 All around. 215/35 245/35, 5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

http://badcopnodonuts.com/wp-content...s/dsc04853.jpg



7.5 inch step lip

7.5-INCH STEP LIP « BCND

Even though yours look more like 6.5 inch.

Your move! :stirthepot:

Lol!! Every one of your posts cracks me up!

In other news...

http://www.nagtroc.org/forums/index....heels-warning/

Sent from my SPH-D710 using Tapatalk 2

...i thought this thread was about an engine build...

I checked my lip is 7"... Your move...

I debunked your theory on largest step lips available. Yours are not them.



Post pics of your step lips with measuring tape or it never happened.:eek:

They look like 6.5....maybe. I would be proud to post pics if 7 inch. So lets see em.

Also check out the link I posted as COR is manufacturer of Strasse.

The wheels completely failed but its a toss up why the failed.

Sent from my SPH-D710 using Tapatalk 2

You crack me up! They are 7" which is the largest 20" step lip manufacted that I have been able to find. Please post up a manufacturer of a larger 20" step lip... I would like to see that!

That is also a 21" wheel from modulare... Notice I said 20" not 21"...

Not my job to find you bigger lips. strasse wasn't completely honest with you or you are just talking ****.

Obviously you don't know where strasse gets their step lips. Only two manufacturers make step lips in usa and the make any size you want hence the 7.5 i posted.

CoR gets them from where every other wheel company gets them including the one I posted.

You have no clue!

Ill wait for your Pics.

Also don't forget comment on the cor wheel falling apart. They make wheels for many private labels including strasse.

Sent from my SPH-D710 using Tapatalk 2

I commend your persistence.

But you are wrong. There are 8 inch plus step lips.

Why do you insist other wise?

What are you proving? Pretty petty if you ask me.

I know you missed your time from the370z so maybe you are making up for lost time!! :p

Sent from my SPH-D710 using Tapatalk 2

First of all this is what I said. You trolled into the thread and stated that someone had 8" lips... you also posted a picture of the so called 8" lip. Which turns out to be 18/19" wheels and only 7" in width... Then you post another one but turns out to be a 21" wheel and not a 20". You can call me out all you want but at least dont try to fool everyone with your half truths. None of the wheels you posted are of a 20" wheel. I know who manufactures step lips for Strasse and for COR. They offer up to a 7" step lip for 20" diameter wheels. Since your a lawyer and apparently think your the sherlock holmes of the internet. Prove to us who makes a 8" step lip for 20" diameter wheels... I am calling you out! :tiphat:

Sounds like you two are comparing "Johnsons". Who got more "wood". :roflpuke2: