soon to be GTM 1.5 SC

jezeka777 · 08-22-2012, 08:58 PM

As of right now I decided to go with a 92mm pulley to see how much power I get out of it first before going to smaller pulley.. I'm hoping my selection will always be able to get me anywhere between 480 - 500whp. Plus in the video you can see that my rev limiter has been raised pretty high so I'm pretty sure I'll still be making horsepower throughout the whole entire rpm band.

Baer383 · 08-22-2012, 09:09 PM

Quote:

Originally Posted by jezeka777

As of right now I decided to go with a 92mm pulley to see how much power I get out of it first before going to smaller pulley.. I'm hoping my selection will always be able to get me anywhere between 480 - 500whp. Plus in the video you can see that my rev limiter has been raised pretty high so I'm pretty sure I'll still be making horsepower throughout the whole entire rpm band.

You won't get 480-500 with the 92mm pulley I had it on mine I got 450 rwhp after a good tune @ Z1

jezeka777 · 08-22-2012, 09:36 PM

Quote:

Originally Posted by Baer383

You won't get 480-500 with the 92mm pulley I had it on mine I got 450 rwhp after a good tune @ Z1

how high in whp could i get with a 88mm pulley then?

Baer383 · 08-22-2012, 09:46 PM

Quote:

Originally Posted by jezeka777

how high in whp could i get with a 88mm pulley then?

With a 6sp maybe 460 and maybe 470 if your tune is on the money,just order the 88mm pulley this way you will have what you want,you don't have to floor it all the time,plus the extra pulleys are 200 bucks a pop.

jezeka777 · 08-23-2012, 10:37 AM

Quote:

Originally Posted by Baer383

With a 6sp maybe 460 and maybe 470 if your tune is on the money,just order the 88mm pulley this way you will have what you want,you don't have to floor it all the time,plus the extra pulleys are 200 bucks a pop.

yea you got a point

.. 92mm is 10lb and 88mm is 11lb? but i want to brake in the SC and my motor with the boost for a bit then add more power to it if i can later on.

Baer383 · 08-23-2012, 11:12 AM

Quote:

Originally Posted by jezeka777

yea you got a point

.. 92mm is 10lb and 88mm is 11lb? but i want to brake in the SC and my motor with the boost for a bit then add more power to it if i can later on.

The SC break in is only 60 miles and you engine is basically broke in now,I put my SC on my car with only 3000 miles and I have never looked back.

Mr.Squeeze · 08-23-2012, 11:50 PM

Quote:

Originally Posted by Baer383

The SC break in is only 60 miles and you engine is basically broke in now,I put my SC on my car with only 3000 miles and I have never looked back.

Agree

jezeka777 · 08-29-2012, 11:03 AM

Hey guys haven't been on in a bit. so my car currently revs up to 8,000 rpm and i am about to install my supercharger kit hopefully soon. do you think its ok for me to still have 8,000 rpm rev limiter when boosting on SC kit?

theDreamer · 08-30-2012, 07:55 AM

Quote:

Originally Posted by jezeka777

Hey guys haven't been on in a bit. so my car currently revs up to 8,000 rpm and i am about to install my supercharger kit hopefully soon. do you think its ok for me to still have 8,000 rpm rev limiter when boosting on SC kit?

I would say no, really no need for it.
I would say the only reason I would do it if I am seeing power all the way to 8k RPM limit. Even then though you will be pushing the block harder and harder each time you hit that. Built block with 8k.

ANMVQ · 08-30-2012, 07:58 AM

I agree reving to 8k is asking for trouble, there is a boom story on here and the guy was reving the car that high.. Stay at 7300-7500,

jezeka777 · 08-30-2012, 08:45 AM

the reason i have the rev isn't to see more power but its so when i shift i am closer to my peak HP again and don't get as much lag when going through the mid rpms..

theDreamer · 08-30-2012, 09:02 AM

With the 1.5 kit and the amount of power you can tune it up to, having the limiter at 7500 is plenty.
I would lower it back to stock once the kit is on and drive it for awhile and see how you like it and after that if you feel the need to raise it then go ahead but I doubt you will find a need.

jezeka777 · 08-30-2012, 09:38 AM

Quote:

Originally Posted by theDreamer

With the 1.5 kit and the amount of power you can tune it up to, having the limiter at 7500 is plenty.
I would lower it back to stock once the kit is on and drive it for awhile and see how you like it and after that if you feel the need to raise it then go ahead but I doubt you will find a need.

That's a solid point.

Baer383 · 09-25-2012, 08:05 AM

I have been busy for awhile so I haven't been on the forums much I just finished putting my stage 1.5 on my new 2013 Nismo with only 300 miles on it and it feels stronger than before and very stock feeling when driven.

ANMVQ · 09-25-2012, 08:23 AM

In for dyno numbers, Glad you like it

View Poll Results: pulley size GTM 1.5 SC
98MM	1	9.09%
92MM	3	27.27%
88MM	7	63.64%
Voters: 11. You may not vote on this poll

08-30-2012, 07:58 AM	#25 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I agree reving to 8k is asking for trouble, there is a boom story on here and the guy was reving the car that high.. Stay at 7300-7500, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-30-2012, 09:02 AM	#27 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	With the 1.5 kit and the amount of power you can tune it up to, having the limiter at 7500 is plenty. I would lower it back to stock once the kit is on and drive it for awhile and see how you like it and after that if you feel the need to raise it then go ahead but I doubt you will find a need. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

09-25-2012, 08:05 AM	#29 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	I have been busy for awhile so I haven't been on the forums much I just finished putting my stage 1.5 on my new 2013 Nismo with only 300 miles on it and it feels stronger than before and very stock feeling when driven. __________________ 2013 ZL1 754 rwhp 747 rwtq

09-25-2012, 08:23 AM	#30 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	In for dyno numbers, Glad you like it __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-22-2012, 08:58 PM	#16 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 13	As of right now I decided to go with a 92mm pulley to see how much power I get out of it first before going to smaller pulley.. I'm hoping my selection will always be able to get me anywhere between 480 - 500whp. Plus in the video you can see that my rev limiter has been raised pretty high so I'm pretty sure I'll still be making horsepower throughout the whole entire rpm band.

08-29-2012, 11:03 AM	#23 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 13	Hey guys haven't been on in a bit. so my car currently revs up to 8,000 rpm and i am about to install my supercharger kit hopefully soon. do you think its ok for me to still have 8,000 rpm rev limiter when boosting on SC kit?

08-30-2012, 08:45 AM	#26 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 13	the reason i have the rev isn't to see more power but its so when i shift i am closer to my peak HP again and don't get as much lag when going through the mid rpms..