soon to be GTM 1.5 SC

jezeka777 · 08-21-2012, 11:20 AM

Hey guys last time i made a thread i was about to get a STILLEN SC but after getting sweet talked by SAM at GTM I just had to go with there product

... I just finished paying for the 1.5 SC kit

but before it ships out i would like to know what pulley size would be best for a daily driver.. I am a little power hungry and want to be as close to 500whp

but not put my engine in the red zone.. my options are 98mm, 92mm, or 88mm.. I might go for the 92mm pulley but my heart isnt set on it yet... if any one knows what boost and whp numbers i can see with anyone of there pulleys then please chime in.

thanks

ANMVQ · 08-21-2012, 11:33 AM

Man I hope you get to the number you want, An are happy , Didnt you mention something about the Dealer warrenty with the Stillen?

Baer383 · 08-21-2012, 12:15 PM

I have this same kit the 88mm is a 11 lb pulley and mine is making 500 at the wheels on Meth and mine is a 7at,a 6sp will make a little more.

jezeka777 · 08-21-2012, 12:25 PM

Quote:

Originally Posted by ANMVQ

Man I hope you get to the number you want, An are happy , Didnt you mention something about the Dealer warrenty with the Stillen?

I was at one point concerned with the warranty issue but i have seen how stable and safe SCing these cars really are. I believe that
GTM had an article on SC vs. Turbo and they happen to mention that SCing these cars have less of a bad impact on the rods and pistons because of the linear power then when going turbo. In alot of cases on this forum you have seen a lot more rebuilds on guys who are Turbo then SC.

I guess i'm going by instinct and hoping for the best on my build. If worst comes to worst I can look into getting drop-in pistons and new rods to hold up the boost.

ANMVQ · 08-21-2012, 12:27 PM

Nice man good luck on your project also, I had to change my APT to Sept 1 (Due to work) But we'll see,

jezeka777 · 08-21-2012, 12:30 PM

Quote:

Originally Posted by ANMVQ

Nice man good luck on your project also, I had to change my APT to Sept 1 (Due to work) But we'll see,

Im still going to follow and support your build ANMVQ and hoping for the best.

ANMVQ · 08-21-2012, 12:36 PM

Quote:

Originally Posted by jezeka777

Im still going to follow and support your build ANMVQ and hoping for the best.

Thanx alot man, I'll be watching yours an hoping the best for you also.

Mr.Squeeze · 08-21-2012, 12:55 PM

Quote:

Originally Posted by jezeka777

Hey guys last time i made a thread i was about to get a STILLEN SC but after getting sweet talked by SAM at GTM I just had to go with there product

... I just finished paying for the 1.5 SC kit

but before it ships out i would like to know what pulley size would be best for a daily driver.. I am a little power hungry and want to be as close to 500whp

but not put my engine in the red zone.. my options are 98mm, 92mm, or 88mm.. I might go for the 92mm pulley but my heart isnt set on it yet... if any one knows what boost and whp numbers i can see with anyone of there pulleys then please chime in.

thanks

Go with the 88MM

good luck with your build. Who is doing the install for you on your car?

jezeka777 · 08-21-2012, 01:18 PM

Quote:

Originally Posted by Mr.Squeeze

Go with the 88MM

good luck with your build. Who is doing the install for you on your car?

CR Racing in Long Island NY and tuning done by API TUNING in Yonkers NY..

i was thinking of going with the 88mm pulley from the start but i would feel like i wouldn't be able to upgrade from that if i want more power.. lol

here is my video with only test pipes done by CR Racing and API TUNING.....
http://www.youtube.com/watch?v=t7MV5t4Yujw

jezeka777 · 08-21-2012, 05:53 PM

Bump

Mr.Squeeze · 08-21-2012, 09:01 PM

Quote:

Originally Posted by jezeka777

CR Racing in Long Island NY and tuning done by API TUNING in Yonkers NY..

i was thinking of going with the 88mm pulley from the start but i would feel like i wouldn't be able to upgrade from that if i want more power.. lol

here is my video with only test pipes done by CR Racing and API TUNING.....
370z API Tuning - YouTube

I have never heard of them and I am in that area all the time for years in Dobbs Ferry right by Yonkers.

I see you have the install and tune covered I was going to recommend
Real Auto Dynamics in Long Island for install and tune.

jezeka777 · 08-21-2012, 10:16 PM

Quote:

Originally Posted by Mr.Squeeze

I have never heard of them and I am in that area all the time for years in Dobbs Ferry right by Yonkers.

I see you have the install and tune covered I was going to recommend
Real Auto Dynamics in Long Island for install and tune.

do you know more or less how much install would be because my guy is booked for a bit.

Mr.Squeeze · 08-22-2012, 05:35 AM

Quote:

Originally Posted by jezeka777

do you know more or less how much install would be because my guy is booked for a bit.

I am not sure how much the install would be but give the shop a call 516-442-7155. There in long Island I got my Twin Turbo install done there. You can get your install and tune done there.

http://www.facebook.com/realautodynamics

Look what showed up at Real Auto Dynamics

GUTCH · 08-22-2012, 09:26 AM

Quote:

Originally Posted by Baer383

I have this same kit the 88mm is a 11 lb pulley and mine is making 500 at the wheels on Meth and mine is a 7at,a 6sp will make a little more.

What transmission upgrades did you do if any?

Baer383 · 08-22-2012, 01:56 PM

Quote:

Originally Posted by GUTCH

What transmission upgrades did you do if any?

None really just a 25 row trans cooler with a 6.5 in fan in front of it and my line pressure is turned up so much it chirps 2nd gear.

View Poll Results: pulley size GTM 1.5 SC
98MM	1	9.09%
92MM	3	27.27%
88MM	7	63.64%
Voters: 11. You may not vote on this poll

08-21-2012, 11:20 AM	#1 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 13	soon to be GTM 1.5 SC Hey guys last time i made a thread i was about to get a STILLEN SC but after getting sweet talked by SAM at GTM I just had to go with there product... I just finished paying for the 1.5 SC kit but before it ships out i would like to know what pulley size would be best for a daily driver.. I am a little power hungry and want to be as close to 500whp but not put my engine in the red zone.. my options are 98mm, 92mm, or 88mm.. I might go for the 92mm pulley but my heart isnt set on it yet... if any one knows what boost and whp numbers i can see with anyone of there pulleys then please chime in. thanks

08-21-2012, 11:33 AM	#2 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Man I hope you get to the number you want, An are happy , Didnt you mention something about the Dealer warrenty with the Stillen? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-21-2012, 12:15 PM	#3 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	I have this same kit the 88mm is a 11 lb pulley and mine is making 500 at the wheels on Meth and mine is a 7at,a 6sp will make a little more. __________________ 2013 ZL1 754 rwhp 747 rwtq

08-21-2012, 12:27 PM	#5 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Nice man good luck on your project also, I had to change my APT to Sept 1 (Due to work) But we'll see, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-21-2012, 05:53 PM	#10 (permalink)
jezeka777 Base Member Join Date: Nov 2011 Location: westbury ny Posts: 118 Drives: 2011 370z sport Rep Power: 13	Bump