Am sorry abt that , it makes u think twice who to deal with now :shakes head:
|
This thread has been painful. From all ends. Truth is, that piece looks OK to run. For $170 that's a LOT of work. No it ain't perfect, but it arrived on time, and it's handcrafted.
There is no 'crack' in the intake. The joint was welded fully on the other side. Looks: As a past tech, I've seen the prettiest parts run like crap, and ham and egg contraptions set records. It depends. I feel your disappointment, but I'm not convinced S&R did you wrong. ANMVQ: You don't need to agree. :) Coop |
Hey Coop thanx man, For the info, I is fully welded on the but there is a gap between the two peices, I mean trust me I did not expect it to be "perfect" Because it is the first one. But I have had parts customed before," Air intake for my old EVO 8" Bill at DSG made it for me and I was the only one to ever run it, An it looked 100% better than this, The things that really bug me are the spaces on the inside where the MAF's would sit, the gap where the 2 arms meet and the huge mound of a weld, The interior of the intake should be smooth no? Imperfections will cause turbulence wont they? Plus on the outside the MAF housing are slanted? So the MAF would sit slanted on the pipe , Wont that affect the air readings? Things I want to understand. I know being the first and having this made "Special " for you or your car take time and can be a trial and error , But it just seems this went off from the start. Like I said before I'm sure Bobby is great, But some otheres have to help him out.
|
have you called Bobby?
and im with coop on this one... report back once it's installed |
Quote:
ANMVQ, just wait a few more weeks. I guarantee you will be happy with the solution coming if everything works out. |
Quote:
I'm also with Jmac on this, What because I have the Stillen kit(Supposed to sux) I have to use something I feel is not good.. Pics of the MAF housing? From what S&R's pipe? I have it in the pics above? The housings are not stait and do not line up with the cut out in the intake pipe leaving a gap, |
Quote:
|
Quote:
This is all part of doing a custom job put the intake on and test it on the dyno.Leave the front bumper off and test between the two intakes that one and the Stillen one. I am with Coop on this one as well on this one. I wasted more thant the $170 that you just spent on that one intake on Cog pulleys and belt's trying to figure out the correct combo. Now you have the correct Cog combo and belt combo through trial and error by me. Basically what I am trying to say is things might not work out the first time the way you want them to. I really hope thing's work out for you but if you didnt think you was going to have a few bumps in the road , then you might want to stop right now and leave the kit as is. |
Quote:
Quote:
Judge: Strike them from the record! LOL! Thanks, Coop |
Quote:
|
Quote:
|
Quote:
I was almost planning on hitting bumps in the road, Just not with workmanship, Parts being delayed, Not in stock, Waiting for things to get fixed, YES of course.. But I have been in this for over what weeks without the car, So I have spent the 6+ weeks of the summer in a loaner car. Did not think it was going to be smooth, But at the sametime not this screwy. |
Quote:
Believe I understand frustration things happen ,you never know what kind of bumps in the road you might hit in a build. I know what it feel's like Im still not at 100% with mine build yet. |
Quote:
|
dispute the charges if you paid with a card man!
|
Quote:
Picking up the car Wens I hope? It should be buttoned up today or tomorrow and is getting a full detail, Was dusty as heck from sitting, LOL . Then I have to see if or when I can get out and pick it up.. |
Quote:
|
Quote:
|
hey bro... im also with coop.... those welds arent completely horrible... there actually pretty decent i was honestly expecting chicken sh!t when i opened the pics. But the welds are decent man, not perfect show quality ... and i dont think they would fail you :D
|
Quote:
Please do, Like I said I tried calling on Saturday 4 times( Seriously) No anwser and could not leave a VM, They have my # or at least they should. Like I said I know he has been busy, Tried to talk to him a few times last week-before I got this has was at the other shop or on a forklift moving the dyno. |
Quote:
|
Quote:
|
Thank you Isamu
|
Quote:
when you say bottom of the maf housings they welded those crooked also? |
ANMVQ I can see your not happy with that one. I will have my fab guy build you another one. Give me a week to make you another one. On a side note there is nothing wrong with the MAF locations considering they are in different locations on our turbo kits and every cold air intake. I know this because I have data log many turbo kits and every cold air known to man.
|
Quote:
Hey Bobby, Thank you again, I wasnt worried about the MAT locations and much as the angle they will sit in the pipe, Can you call me when you have time to talk, When I call you your always tied up, LOL , I just want to talk to you about some things, Thank you ,. |
By the way we are closed on saturdays
|
Quote:
I'm just worried about the gaps and the humps becasue I do not want them to create turbulence? Just a smooth air flow, |
^^^ awesome service right there man :tup:
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 11:16 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2