Nissan 370Z Forum
Page 7 of 14 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Single turbo Nismo (http://www.the370z.com/forced-induction/56473-single-turbo-nismo.html)

Flyboy 07-09-2012 02:19 PM
Quote:
Originally Posted by W.O.W. 370Z (Post 1810743)
How did the retune go at Z1? What numbers you walk out with?
Why the need for a retune? Did I miss something? didn't this car just get built??

W.O.W. 370Z 07-09-2012 05:26 PM
Quote:
Originally Posted by Flyboy (Post 1813162)
Why the need for a retune? Did I miss something? didn't this car just get built??
No clear explanation why. The timing is definitely suspect.

Sent from my SPH-D710 using Tapatalk 2

birdmanx1 07-09-2012 05:27 PM
Quote:
Originally Posted by valpozguy (Post 1811008)
BALLER = AWSOME!

sent from my SAMSUNG- SINGLE TURBO SGH-1717
24*7 valpozguy ;)

Isamu 07-09-2012 09:52 PM
Quote:
Originally Posted by W.O.W. 370Z (Post 1813468)
No clear explanation why. The timing is definitely suspect.

Sent from my SPH-D710 using Tapatalk 2
no, not enough fuel.. it was good except a LITTLE lean on the top end..

Isamu 07-09-2012 09:53 PM
and Final results were 508whp and 404wtq.. and it was hot as balls...

W.O.W. 370Z 07-09-2012 09:54 PM
Quote:
Originally Posted by Isamu (Post 1813722)
no, not enough fuel.. it was good except a LITTLE lean on the top end..
Not timing in tune. Timing of needing a retune already.

Sent from my SPH-D710 using Tapatalk 2

theaudir8fan 07-10-2012 01:30 AM
Quote:
Originally Posted by Isamu (Post 1813728)
and Final results were 508whp and 404wtq.. and it was hot as balls...
what psi is this on?

valpozguy 07-10-2012 01:59 AM
Hey Tim they just closed my thread because S&R Performance is not a supporting vendor in here. And yours is still open?

sent from my SAMSUNG- SINGLE TURBO SGH-1717

KaienZ34 07-10-2012 07:39 AM
Quote:
Originally Posted by theaudir8fan (Post 1813969)
what psi is this on?

I think i remember it being 8.6psi.

Flyboy 07-10-2012 08:02 AM
So why are these guys making Turbo kits that you have to take somewhere else to get tuned??

this company lost my vote.

edub370 07-10-2012 08:05 AM
Quote:
Originally Posted by Flyboy (Post 1814131)
So why are these guys making Turbo kits that you have to take somewhere else to get tuned??

this company lost my vote.
u do realize that uprev provides the tuning software for all FI kits right...? and anyone can tune uprev right...?

valpozguy 07-10-2012 09:02 AM
They did tune it. He was driving his car home from there shop in Tampa and got a code and stoped at z1 for them to take a look at the code and they wanted to dyno his car. And decided it needed some more fuel up top. Correct me if Im wrong

sent from my SAMSUNG- SINGLE TURBO SGH-1717

TerribleONE 07-10-2012 09:14 AM
I think that is exactly what happened ^ either way cant be to safe when it comes to what tune your running!

valpozguy 07-10-2012 09:45 AM
you could run his car on every dyno from florida to north dakota and they would all read different.

sent from my SAMSUNG- SINGLE TURBO SGH-1717

Isamu 07-10-2012 10:01 AM
correct, she was just a little lean up top and Z1 fixed it..
the code was from the MAP sensor saying.. wtf.. why am I seeing so much pressure.. it's nothing anyone can do... unless I get a bigger MAP..but then, where I am going cold starts would be a bitch...
the kit is outstanding, the Z1 guys were impressed, and that says a lot to me


All times are GMT -5. The time now is 05:24 AM.
Page 7 of 14 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2