Zex kit install 100 shot

V8Killer · 04-07-2015, 03:02 AM

Quote:

Originally Posted by Big J

I have lots of experience with nitrous and have been on the fence just bc i don't race like i used to. So you blew the motor because a zex solenoid stuck open?

Not sure, not even the shop can explain what happened. First thing they thought was something happened with the box but after further testing the box is fine. They are suspecting something went wrong with the nano kit possibly maybe improper psi.

Quote:

Originally Posted by SlowZ

Not a fan of zex products. I don't think I have any of their parts on my Z. 190 shot and I never had a problem.

190 shot on what? Stock block I wouldn't think so b/c the first thing Z1 thought was we had the wrong jets and were spraying for a 200 shot the way the motor was responding b/c it just kept going up.

Quote:

Originally Posted by JC-Nismo

Dam dude, so you blew two motors and never got a chance to put either one of them on the streets??? I was thinking about No2, but after reading this horror story, I think not!!!!

I don't blame the nitrous on the first one. Improper tune. 2nd one is still no clue, the shop blames the nano kit but even then they are not sure. I spoke with nano and they have never heard of it happening before either.

SlowZ · 04-07-2015, 04:28 PM

Yup stock block. A majority of my kit is NX with the exception of a few dyno tune stuff and NOS products. Iv heard too many horror stories with Zex parts

DavidZ370 · 04-07-2015, 04:51 PM

OH my, should've just got the TT and saved some cash dude, browsing through you went and my understanding is you went through 2 motors ?

V8Killer · 04-07-2015, 08:25 PM

Quote:

Originally Posted by SlowZ

Yup stock block. A majority of my kit is NX with the exception of a few dyno tune stuff and NOS products. Iv heard too many horror stories with Zex parts

Man that is crazy, even the guys at z1 don't recommend going past a 150 shot on stock block.

Quote:

Originally Posted by DavidZ370

OH my, should've just got the TT and saved some cash dude, browsing through you went and my understanding is you went through 2 motors ?

Ya I went through two motors but only paid for one. so 2500 bucks later here I am. Hopefully all goes well.

SlowZ · 04-08-2015, 01:12 AM

[QUOTE=V8Killer;3162502]Man that is crazy, even the guys at z1 don't recommend going past a 150 shot on stock block.

lol well yeah of course they won't recommend it. They don't want to be responsible if anything happens. Trust me on race fuel the motor can take it. I personally know guys with DE's doing 150+ shot on stock blocks and those motors aren't nearly as stout as the VHR so what's another 40hp?

chrischhorn · 04-08-2015, 03:46 AM

100 octane, 1 or 2 step colder plugs, and taking 2-4 degrees out of the tune will be safe to run a 150 shot. Rule of thumb with nitrous is don't go over 50% of the motors original hp figures. Run wet kit with a tune and a little on the richer side. You can do an NA tune with a wet kit and run .02 larger pill than "calculated" on the fuel side to be safe also.

But I have also heard horror stories with the ZEX brain. It's an awesome system IF yours works flawlessly. I had a friend who had a bad box straight from the start. Another that failed halfway into the tuning session and his 3rd box failed 3 months after that. Originally my kit I had built for my Z was a full dyno tune fogger kit with all the bells and whistles available.

V8Killer · 04-08-2015, 04:39 AM

I've really thought about switching out the box but I am unsure what kit I could go with and what would have to be rewired. I am guessing I can just the solenoids and it would be fine wouldn't?

V8Killer · 04-29-2015, 09:37 AM

Just got the dyno sheet from Z1. At this time they do not want to continue use with the nano system as they feel it is the reason of a complete failure last time.

StiKiller_12 · 04-29-2015, 09:59 AM

Quote:

Originally Posted by V8Killer

Just got the dyno sheet from Z1. At this time they do not want to continue use with the nano system as they feel it is the reason of a complete failure last time.

Impressive numbers!!! 100shot right?

NeverBoneStck · 04-29-2015, 09:59 AM

Why do they feel it was a nano issue??

V8Killer · 04-29-2015, 11:06 AM

Quote:

Originally Posted by StiKiller_12

Impressive numbers!!! 100shot right?

THank you yes 100 shot

Quote:

Originally Posted by NeverBoneStck

Why do they feel it was a nano issue??

They are saying that they feel the previous failure was too much cylinder pressure

Carbon_z · 04-29-2015, 11:11 AM

I was at 440 with my NX kit... With old exhaust very restrictive. Probably would have hit 450 rwhp with the motordyne I have.

V8Killer · 04-30-2015, 05:09 PM

https://www.youtube.com/watch?v=8YPdiRlcwHY

YzGyz · 04-30-2015, 05:38 PM

NOS noob here.. What is the purpose of going SPPP SPHHH before you run? It is priming some line with the gas or something? It looks cool every time i see it.

YzGYz

gbrettin · 04-30-2015, 05:50 PM

He is purging all the air out of the line so that nitrous instantly hits.

04-08-2015, 03:46 AM	#201 (permalink)
chrischhorn A True Z Fanatic Join Date: Jan 2012 Location: Mililani, HI Posts: 1,566 Drives: 2014 Juke Nismo RS Rep Power: 16	100 octane, 1 or 2 step colder plugs, and taking 2-4 degrees out of the tune will be safe to run a 150 shot. Rule of thumb with nitrous is don't go over 50% of the motors original hp figures. Run wet kit with a tune and a little on the richer side. You can do an NA tune with a wet kit and run .02 larger pill than "calculated" on the fuel side to be safe also. But I have also heard horror stories with the ZEX brain. It's an awesome system IF yours works flawlessly. I had a friend who had a bad box straight from the start. Another that failed halfway into the tuning session and his 3rd box failed 3 months after that. Originally my kit I had built for my Z was a full dyno tune fogger kit with all the bells and whistles available. __________________ R.I.P. 8/01/13 1SlowZ One day I'll have another....

04-08-2015, 04:39 AM	#202 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	I've really thought about switching out the box but I am unsure what kit I could go with and what would have to be rewired. I am guessing I can just the solenoids and it would be fine wouldn't? __________________ "Punch" Too much to list and a baby shot of nitrous....

04-29-2015, 09:59 AM	#205 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	Why do they feel it was a nano issue?? __________________ Juiced! That is all you need to know !!

04-29-2015, 11:11 AM	#207 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,695 Drives: Carbon Fiber 370z Rep Power: 18	I was at 440 with my NX kit... With old exhaust very restrictive. Probably would have hit 450 rwhp with the motordyne I have. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.

04-30-2015, 05:09 PM	#208 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	https://www.youtube.com/watch?v=8YPdiRlcwHY gbrettin likes this. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-07-2015, 04:28 PM	#197 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	Yup stock block. A majority of my kit is NX with the exception of a few dyno tune stuff and NOS products. Iv heard too many horror stories with Zex parts

04-07-2015, 04:51 PM	#198 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 22	OH my, should've just got the TT and saved some cash dude, browsing through you went and my understanding is you went through 2 motors ?

04-08-2015, 01:12 AM	#200 (permalink)
SlowZ Premium Member Join Date: Jan 2014 Location: So cal Posts: 371 Drives: Z Rep Power: 11	[QUOTE=V8Killer;3162502]Man that is crazy, even the guys at z1 don't recommend going past a 150 shot on stock block. lol well yeah of course they won't recommend it. They don't want to be responsible if anything happens. Trust me on race fuel the motor can take it. I personally know guys with DE's doing 150+ shot on stock blocks and those motors aren't nearly as stout as the VHR so what's another 40hp?

04-30-2015, 05:38 PM	#209 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	NOS noob here.. What is the purpose of going SPPP SPHHH before you run? It is priming some line with the gas or something? It looks cool every time i see it. YzGYz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

04-30-2015, 05:50 PM	#210 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	He is purging all the air out of the line so that nitrous instantly hits. V8Killer and madwi like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single shot for the weekend	DJackie	Photography	5	01-29-2012 07:28 AM
Is this tire shot?	370ZBG	Wheels & Tires	20	04-13-2011 06:43 PM
SHOT in the DARK	ZYUL8R	Wanted	3	10-20-2010 05:07 PM
The single Z shot	theDreamer	Nissan 370Z Photos / Spyshots / Video / Media Gallery	88	01-30-2010 02:12 AM
probably a shot in the dark...	Richie	Nissan 370Z General Discussions	0	11-25-2009 11:15 AM