Your post and pics were great. Just bought the stillen and my country is way behind in FI sports cars. I have the akropovitch and stillen headers and cats how many hp (at the wheel) should I be able to get with the uprev tune? Thanks

Hello

With a good tune (not STILLEN) and your exhaust system
do you come about to 460 - 500 HP
Maybe something more ...:)

The power at the wheel, I can only estimate
Power loss to the wheel, we estimate between 12 - 16%

(See the calculator in the link
It is impossible to calculate these values accurately, this information should be used as a rough guide only)

Wheel Horsepower to Crankshaft Horsepower Guestimator

Hope I could help you that way
Do not forget to install the additional oil cooler

Greetings
Ivo

Careful with the headers and HFC's Stillen themselves
Don't recomend running them , I don't either @ 11-12 psi your at the blocks limit ( very close ) just get all your info before you spend $$$ on replacing the motor .

"FROZENBOOST" Water to Air Intercooler

Air to Water Heat Exchanger

http://www.the370z.com/attachment.ph...1&d=1390329040

Many Thanks to ANMVQ for the Tip! :tup:

I ordered the intercooler a week ago!
Today it was delivered (of the States to Switzerland)
Respect!

And the intercooler looks great
Super product and the delivery was very fast!

In the coming months, I will install the intercooler and Report the result

Stay tuned

Ivo

Nice. Please post some photos of how it will mount because there is not much room with the intake filters and oil cooler. Maybe it goes in front of everything.

Thanks

Hey Ivo, You welcome man!! Looking GOOD! Any time I can help out let me know.. in too for installed pics to, Wish I took some the few days I had it .

I have this on mine. Took a little cutting of the Nismo grill but does good.

I only had to cut off my tow hitch thingy. :)

I just screwed it right to the crash bar

I couldn't :/ . I wanted mine centered. Not sure how different the Z is from the G in the front tho. But mine had to go.

Must be different because I got mine perfectly centered and didn't have to cut the tow hook

Hey Guys

Thanks for the replys and PIC! :tup:

I will document the Installation

That is the plan :tup:

Did you notice any difference in oil temps since the heat exchanger is now in front of everything?