Nissan 370Z Forum
Page 30 of 39 « First 202829 30 3132 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   GTM Stage 2 Supercharger Preliminary Testing Results (http://www.the370z.com/forced-induction/36551-gtm-stage-2-supercharger-preliminary-testing-results.html)

Dzel 07-28-2011 04:24 PM
So I should be fine with my CNT TP's and and FI CBE exhaust thats 2.5 then.

Mike@GTM 07-28-2011 04:29 PM
Quote:
Originally Posted by Dzel (Post 1234976)
So I should be fine with my CNT TP's and and FI CBE exhaust thats 2.5 then.
Yes.

leighspped 07-28-2011 04:44 PM
So the consences is that this SC will not work properly/fit with fast intentions header? I just want to be sure

Mike@GTM 07-28-2011 04:58 PM
Quote:
Originally Posted by leighspped (Post 1235021)
So the consences is that this SC will not work properly/fit with fast intentions header? I just want to be sure
We have yet to test fit the FI LTH with the Stage 2. That said, we pretty much don't need to, because there's just not a whole lot of room for the two to coexist. You are welcome to try, but you might have to modify the headers.

KaienZ34 07-28-2011 05:00 PM
Quote:
Originally Posted by leighspped (Post 1235021)
So the consences is that this SC will not work properly/fit with fast intentions header? I just want to be sure
Quote:
Originally Posted by Mike@GTM (Post 1234799)
We're not saying that only GTM exhaust parts will work with the kit. As far as cat-backs, test pipes and HFC's, stock and aftermarket are concerned, they work just fine with our Stage 2 kit.

It is not desirable to go with a large diameter cat-back because this system needs some back pressure to work well. Besides, one of the main reasons for going with a supercharger as opposed to a twin turbo is for the additional bottom end torque the supercharger provides.

That's what Sam's comment was about.

As for the LTH, they are physically larger than the factory headers and there's just not enough room for them to coexist with the larger supercharger system. Besides, the Stage 2 Supercharger makes 500+whp on the stock exhaust...what more do you want?
.

JordoKAP 07-28-2011 05:21 PM
Is it possible to upgrade from stage 1 to stage2?

KaienZ34 07-28-2011 05:37 PM
Quote:
Originally Posted by JordoKAP (Post 1235080)
Is it possible to upgrade from stage 1 to stage2?

I don't think it's as simple as changing the pulley out. You could sell me your stg I and get the stg II....:stirthepot:

Dzel 07-28-2011 05:50 PM
:icon18::tup:

SAM@GTM 07-28-2011 06:24 PM
Quote:
Originally Posted by JordoKAP (Post 1235080)
Is it possible to upgrade from stage 1 to stage2?
I'm hesitant to say this, because i don't want to get bombarded with "is done yet" . But we will be working on an affordable supplement kit to upgrade the stage 1.

Stage 1 kit guys wont be disappointed, but as usual things takes time.

Sam

dixon cider 07-28-2011 07:31 PM
I wanted to carry this over from my thread.


"All in all, sam and the crew at GTM are top notch in my book. Even though I was a pain in SAMs azz at times, he remained professional at all times and that professionalism carries over into their work. I am very impressed with this kit and the quality that went into it. Sam and GTM will continue to have my business as far as I'm concerned."

Kirkster 07-28-2011 09:17 PM
Quote:
Originally Posted by SAM@GTM (Post 1235149)
I'm hesitant to say this, because i don't want to get bombarded with "is done yet" . But we will be working on an affordable supplement kit to upgrade the stage 1.

Stage 1 kit guys wont be disappointed, but as usual things takes time.

Sam
No worries here... Enjoying the boost. Just can't wait till it cools off here. this 100°+ weather just plain sucks.

frostyrock7c 07-28-2011 09:30 PM
Man oh man... This is going to be a blast!

definitionxmk 07-28-2011 10:30 PM
sooooooooooooo......... press release eta?

theDreamer 07-28-2011 10:33 PM
Quote:
Originally Posted by definitionxmk (Post 1235495)
sooooooooooooo......... press release eta?
It's fast, done! :p

definitionxmk 07-28-2011 10:47 PM
haha, tell me about it! seeing as the press car is mine, the wait is soooo unbearable x_x'

I have too many parts+shipping to hawaii before a scheduled show =P


All times are GMT -5. The time now is 09:12 AM.
Page 30 of 39 « First 202829 30 3132 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2