GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.

MMC Racing · 06-17-2010, 11:46 AM

Quote:

Originally Posted by SAM@GTM

I think you are missing the point, My concern was not the boost or the Hp numbers, the concern here is the torque the car made 340 RWTQ on a stock 7 A/T . couple more psi would have been over 360 RWTQ . for a stock 7 a/t and a customer out of the country waiting on the car, i was not willing to take that risk .

Beside shunby was happy with results so why take a chance .

Sam

Quote:

Originally Posted by Z eliminator

Have all you guy forgoten that shumby's car is a 7 AT. He is the first GTM on a 7AT. The block can take 8 psig but what about the trensmision? If he blows a tranney on the way home im sure that he would not be happy,
Z

Not the way I would have went. There is such a thing called a pedal which allows a person to modulate the power..

Driving 2300 miles or whatever, I would have wanted the end game setup with trans mods coming down the road.. Not lets add more boost later and hope the tune is ok or can be adjusted well remotely.

As for blowing it on the way home, it doesn't matter if the car made 200hp or 600hp - if you drive it normally there is no worry. Getting it home fine is not a valid point of consideration.

efuseakay · 06-20-2010, 07:17 PM

Quote:

Originally Posted by MMC Racing

Not the way I would have went. There is such a thing called a pedal which allows a person to modulate the power..

Driving 2300 miles or whatever, I would have wanted the end game setup with trans mods coming down the road.. Not lets add more boost later and hope the tune is ok or can be adjusted well remotely.

As for blowing it on the way home, it doesn't matter if the car made 200hp or 600hp - if you drive it normally there is no worry. Getting it home fine is not a valid point of consideration.

Then get your own GTM kit and do it "your way".

Shumby, I'm jealous!

MMC Racing · 06-20-2010, 09:04 PM

Quote:

Originally Posted by efuseakay

Then get your own GTM kit and do it "your way".

Shumby, I'm jealous!

I didn't say he was stupid, I just gave my opinion which comes from experience of having long distance work done about 6 years ago. I find your opinion of my opinion highly opinionated..

Zsteve · 06-20-2010, 10:15 PM

Quote:

Originally Posted by MMC Racing

I didn't say he was stupid, I just gave my opinion which comes from experience of having long distance work done about 6 years ago. I find your opinion of my opinion highly opinionated..

And my opinion is that you all can have your own opinion. So how many times can you use the word opinion in one sentence with meaning?

efuseakay · 06-20-2010, 10:58 PM

Quote:

Originally Posted by MMC Racing

I didn't say he was stupid, I just gave my opinion which comes from experience of having long distance work done about 6 years ago. I find your opinion of my opinion highly opinionated..

And I didn't say you called him stupid.

Man. Just be happy for him!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM
S & R PERFORMANCE Tampa, Florida OPEN HOUSE!!!!!	shezzzhot	South East Region	7	01-09-2010 02:55 AM
Forged Performance Dyno Day/Open House	XenChi	South East Region	7	04-24-2009 07:54 AM