Nissan 370Z Forum - Ma-Motorsports Boosted performance turbo build

Page 11 of 17

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Ma-Motorsports Boosted performance turbo build (http://www.the370z.com/forced-induction/130226-ma-motorsports-boosted-performance-turbo-build.html)

Spooler

06-14-2021 04:08 PM

Quote:

Originally Posted by Elmo370z (Post 3998634)

Sub frame is out, powder coated or steel it.

Powder coat it like factory.

Elmo370z

06-14-2021 05:22 PM

Quote:

Originally Posted by Spooler (Post 3998636)

Powder coat it like factory.

Powder coat it is. Just got off the phone with Jon

Spooler

06-14-2021 08:06 PM

Quote:

Originally Posted by Elmo370z (Post 3998653)

Powder coat it is. Just got off the phone with Jon

Now, nobody will have a clue you tweaked the pickup points. None the wiser.

Spec Jay

06-14-2021 08:12 PM

Quote:

Originally Posted by Elmo370z (Post 3998315)

Mmmm

ditching the rrp?

Elmo370z

06-15-2021 10:21 AM

Quote:

Originally Posted by Spec Jay (Post 3998679)

ditching the rrp?

Probably, Have to go over it with charles and do some testing before I say screw it.

Elmo370z

06-15-2021 10:21 AM

Another mazworx motor in the works. Not mine but a guy who reached out to me

JARblue

06-15-2021 12:01 PM

Quote:

Originally Posted by Elmo370z (Post 3998734)

Probably, Have to go over it with charles and do some testing before I say screw it.

I assume the reason is specific to your application. You didn't find any issues with it, right? Just that it might not work for your build?

Spooler

06-15-2021 01:07 PM

Quote:

Originally Posted by JARblue (Post 3998749)

I assume the reason is specific to your application. You didn't find any issues with it, right? Just that it might not work for your build?

The RRP system only supports one pump. It is an issue with a twin pump setup. Phunk is coming up with an in tank surge tank setup for twin pumps. I need it. LOL I will fuel starve at 1/2 tank on right hand turns.

Hotrodz

06-15-2021 01:52 PM

Quote:

Originally Posted by Spooler (Post 3998761)

This why I have the Radium Engineering surge tank system in my car.

Sent from my SM-G965U using Tapatalk

Mr.Squeeze

06-15-2021 02:01 PM

Quote:

Originally Posted by Elmo370z (Post 3997545)

Shut up lol. Now I’m in search of a 3.5 diff

Check Junk yards for any G35/350z any year call around I'm sure you can fine one.

Spooler

06-15-2021 04:56 PM

Quote:

Originally Posted by Mr.Squeeze (Post 3998766)

Check Junk yards for any G35/350z any year call around I'm sure you can fine one.

LOL, I already have a 3.3 diff. I am just holding on to it for now.

redondoaveb

06-15-2021 05:00 PM

I just noticed in the tags "seb sucks bigtime" Who in the hell would post that?

Hotrodz

06-15-2021 05:32 PM

Quote:

Originally Posted by redondoaveb (Post 3998787)

I just noticed in the tags "seb sucks bigtime" Who in the hell would post that?

Those be fightin words!

Sent from my SM-G965U using Tapatalk

redondoaveb

06-15-2021 05:50 PM

Quote:

Originally Posted by Hotrodz (Post 3998793)

Those be fightin words!

Sent from my SM-G965U using Tapatalk

Those be beatdown words! :tup:

Rusty

06-15-2021 07:41 PM

Quote:

Originally Posted by redondoaveb (Post 3998787)

I just noticed in the tags "seb sucks bigtime" Who in the hell would post that?

Some idiot. :shakes head:

Elmo370z

06-15-2021 10:08 PM

Quote:

Originally Posted by JARblue (Post 3998749)

I assume the reason is specific to your application. You didn't find any issues with it, right? Just that it might not work for your build?

Nope it worked perfectly fine when I had. If I don’t need it the. I’ll gladly sell it. The twin surge is suppose to work just as good as the rrp in theory.

Elmo370z

06-15-2021 10:09 PM

Quote:

Originally Posted by Spooler (Post 3998761)

You can fit 3 pumps in the rrp.

Elmo370z

06-15-2021 10:12 PM

1 Attachment(s)

Quote:

Originally Posted by Mr.Squeeze (Post 3998766)

Check Junk yards for any G35/350z any year call around I'm sure you can fine one.

Too late

Elmo370z

06-16-2021 12:04 AM

Elmo370z

06-16-2021 12:04 AM

Oooooi did it again. This one is a classic Mad Mike even gets some coverage

Elmo370z

06-22-2021 03:18 PM

2 Attachment(s)

Derp!. Getting one step closer.

Elmo370z

06-29-2021 06:50 PM

Well two step backwards today:(

Hotrodz

06-29-2021 06:56 PM

Quote:

Originally Posted by Elmo370z (Post 4000532)

Well two step backwards today:(

Whatup?!?!

Sent from my SM-G965U using Tapatalk

Rusty

06-29-2021 07:28 PM

Quote:

Originally Posted by Elmo370z (Post 4000532)

Well two step backwards today:(

:icon14: :confused:

Elmo370z

06-29-2021 09:16 PM

2 Attachment(s)

The BP filter relocation hits the sway bar and Fan shroud. So I’m hoping the motor doesn’t have to come back out to fab up something similar to What RT tuning did. Also other missing parts to the kit

madwi

06-29-2021 09:51 PM

Quote:

Originally Posted by Elmo370z (Post 4000562)

Missing parts? :rolleyes:

Elmo370z

06-29-2021 10:39 PM

Quote:

Originally Posted by madwi (Post 4000565)

Missing parts? :rolleyes:

Maybe, I’ll find out later on this week.

madwi

06-29-2021 10:42 PM

Bummer that doesnt fit. I run the same sway bar and was looking at it. Gonna have to talk to Vince I think.

Elmo370z

06-29-2021 11:01 PM

Quote:

Originally Posted by madwi (Post 4000570)

Bummer that doesnt fit. I run the same sway bar and was looking at it. Gonna have to talk to Vince I think.

I’m also running a custom Ron Davis radiator

Mr.Squeeze

06-29-2021 11:11 PM

Quote:

Originally Posted by Elmo370z (Post 4000562)

Crap now actually seeing I see what you were talking about. What R/T did with my car really seems like the best option.

Elmo370z

06-30-2021 02:06 PM

Going to need Omni 4 bar map sensors.

Spooler

06-30-2021 02:18 PM

Quote:

Originally Posted by Elmo370z (Post 4000682)

Going to need Omni 4 bar map sensors.

You didn't have one? I do.

Ghostvette

06-30-2021 02:24 PM

Quote:

Originally Posted by Elmo370z (Post 4000682)

Going to need Omni 4 bar map sensors.

Quote:

Originally Posted by Spooler (Post 4000684)

You didn't have one? I do.

Probably were supposed to be in the kit he got from BP, but disappeared before arriving... :stirthepot:

Elmo370z

06-30-2021 04:41 PM

Quote:

Originally Posted by Ghostvette (Post 4000686)

Probably were supposed to be in the kit he got from BP, but disappeared before arriving... :stirthepot:

I ordered the tuner kit, wasn’t part of the kit. I must of missed it reading over it.

Elmo370z

07-02-2021 09:46 PM

Why I waited so long for those rod bearings

Spooler

07-02-2021 10:04 PM

Quote:

Originally Posted by Elmo370z (Post 4001075)

Why I waited so long for those rod bearings

Here

Elmo370z

07-02-2021 10:42 PM

Quote:

Originally Posted by Spooler (Post 4001078)

Here

Mine didn’t load?

Spooler

07-02-2021 11:09 PM

Quote:

Originally Posted by Elmo370z (Post 4001081)

Mine didn’t load?

Noop, you had too many digits for the name.

madwi

07-03-2021 12:27 AM

I saw some juicy pics of this build today. :yum:

Elmo370z

07-03-2021 05:31 PM

Quote:

Originally Posted by Spooler (Post 4001084)

Noop, you had too many digits for the name.

Somabitch

All times are GMT -5. The time now is 09:58 PM.

Page 11 of 17

« First

Last »

Show 40 post(s) from this thread on one page