06-19-2017, 07:11 PM
|
#3 (permalink)
|
|
Base Member
Join Date: Dec 2016
Location: NoR CaL
Posts: 54
Drives: 08 350z Hr
Rep Power: 10
|
Quote:
Originally Posted by phunk
The T fittings splice into the heater hoses. Bleeder generally goes on the passenger side.
I dont think coolant flow direction through the turbo matters.
If you must take off the turbine housing to clear the tip of the coolant elbow fitting, take great care not to ding up the turbine blades when removing/installing the housing or when handling the turbo with it removed. You might be able to just loosen the bolts and rotate the housing to a different position where the fittings dont hit when rotating.
|
Thank you for the help. I may end up just getting some different fittings that go to the turbo like 45° angles instead of the 90° fittings that come with the kit. I'll see if it can just be rotated first though. 
|
|
|
Similar Threads
1Likes
Threaded Mode
