Quick Question - Brian Crower Stroker Kit

Originally Posted by bullitt5897

A built 3.7L motor will get you to 1000hp without a problem. However, its to be noted that quality components and a good engine builder can make or break your car and its reliability. For internals I would look into Arias, CP, Mahle, and Carillo. These are the top manufacturers that everyoe with a reliable build is running. A few have chosen K1 rods which are a medium grade budget rod. Its a great rod for those in the 600-700hp range but for 1000hp I would go carillo or Mahle. Arias and CP make great pistons for the Z and have proven to be extremely tough.

Just remember when you go stage 3 with FI they customize your turbos to your motor size to ensure you get the best efficiency and response from the kit. I have had long conversations with Tony (the owner) of Fast Intentions and their mentality to Turbo kits is SPOT ON!

As far as fuel system there are multiple options AAM is one option. However CJM is another option. You will want to go to a twin pump and ID1300's as a minimum.

Remember when you mod this far you have to have the expectation that more service is going to be needed. The reason I say this is because your taking a car making 330bhp and now pushing 350+% more power through the chassis and drivetrain. If your wanting to stage the build I would get a built motor with mild headwork (upgraded valves and retainers plus a port job) in stock displacement and compression and run that until your ready to throw the TT kit and fuel system in at one time.

Staging the install is going to cost your more in the long run if you are using a shop to do the labor. its best to do it all in 1 shot and I would splurge and get ecutek!