Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Sticky tires for FI (http://www.the370z.com/forced-induction/112105-sticky-tires-fi.html)

Hotrodz 03-16-2016 02:45 PM

I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt! :icon23::icon17:

Rusty 03-16-2016 03:02 PM

Quote:

Originally Posted by Hotrodz (Post 3437485)
I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt! :icon23::icon17:

:icon23: :nutswinger: :rofl2: :D

gbrettin 03-16-2016 07:53 PM

I just had RE-11's installed today and these things stick to the road like glue!

Fronts: 265/35/19
Rears: 305/30/19 w/ 20mm spacers
http://uploads.tapatalk-cdn.com/2016...73943045b9.jpg

Sent from my SM-G930P using Tapatalk

Hotrodz 03-16-2016 08:31 PM

Looks good now drop that bad boy 1 to 1.5 inches and you will be good to go!

Sent from my SM-N910P using Tapatalk

Streetz 03-17-2016 07:35 AM

Quote:

Originally Posted by Hotrodz (Post 3437485)
I changed out the suite of rear bushing to SPL and upgraded my rear end and yes there is quite a difference in power to the ground according to my butt dyno and I have a very sensitive butt! :icon23::icon17:

Nice! The Mustang guys switch out every bushing in the back. Sub frame, Diff, Toe arm, upper and lower control arms, and anything else I am forgetting.

Hotrodz 03-17-2016 09:00 AM

I also did the impact bushing, z1 urethane transmission and z1 solid motor mounts. The car is rock solid and if you are sensitive to noise I would not do the sub frame bushings as they will make some noise during deceleration more so than all the other upgrades. I don't mind it at cause it sound like a race car lol. You will also get a whine from upgrading to a solid diff diff bushing too. And you may get some cracking and popping from the SPL upper arms and impact bushing too...just get them greased the best you can. Mine creek when making slow hard turns like backing out of my driveway! I think that sums it up pretty well. :tiphat:

Drew303 03-19-2016 11:22 AM

After doing some research Im leaning towards Nitto NT05R in 305's. Anyone here running these with good results?

cjwsrt6 03-20-2016 08:06 AM

Quote:

Originally Posted by Drew303 (Post 3439461)
After doing some research Im leaning towards Nitto NT05R in 305's. Anyone here running these with good results?

I used them on my crossfire, was able to cut 1.8 consistently with a 12.0, good price and great traction, not an everyday tire, I drove on it for a few weeks, never in the rain but it is a noisy tire

hjo1078 03-20-2016 08:50 AM

just got a set of them, but not mounted yet and my cars still not out of the shop, but i'll let u know how they are

Drew303 05-11-2016 07:39 PM

so.... went to order some NT05r's and looks like they are sold out/back order everywhere. Anyone heard how long until they are available again?

YzGyz 05-11-2016 09:04 PM

NT05r 305/35/19, they stick a crap ton better than s04 at the track. My rear camber is at -.05.
http://i226.photobucket.com/albums/d...ps6v00oudd.jpg

I still need more practice at the track as I still bog or spin out.

YzGyz

hjo1078 05-11-2016 10:36 PM

Quote:

Originally Posted by Drew303 (Post 3478537)
so.... went to order some NT05r's and looks like they are sold out/back order everywhere. Anyone heard how long until they are available again?



They are back ordered everywhere. I got mine off ebay. The only place that had them.

Drew303 05-12-2016 10:29 AM

Quote:

Originally Posted by hjo1078 (Post 3478697)
They are back ordered everywhere. I got mine off ebay. The only place that had them.

do you remember which vendor had them????

hjo1078 05-13-2016 11:31 AM

Quote:

Originally Posted by Drew303 (Post 3478952)
do you remember which vendor had them????

it was from directlinewheels on ebay, i had a very good experience ordering from them, they sent me text messages throughout the process with updates.

2 New P305 35R19 Nitto NT05R 305 35 19 Performance 27 44" 0BB Tires 207 570 | eBay

Drew303 05-14-2016 01:52 PM

anyone with the NT05r's had a shop tell you they wont mount them? I had discount tire tell me they wont mount them because of the load rating as in the Z is too heavy for these tires?!?


All times are GMT -5. The time now is 07:44 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2