Nissan 370Z Forum - Speed Density Sensors

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Speed Density Sensors (http://www.the370z.com/forced-induction/111785-speed-density-sensors.html)

Quote:

Originally Posted by StillenZ84 (Post 3429696)

You just switch out the sensor and you are good to go. No additional wiring.

Oh nice! That might be something I look into then.

Anyone use the AAM 4 bar MAP sensor?

Omni GTR 4 bar... i bought mine at rally sport direct for about 105.00

Dang man, you dug this one up from the grave.

Quote:

Originally Posted by swiss370Z (Post 3427147)

Hi Guys

We are currently considering on, via EcuTek, switch to Speed Denisty.
EcuTek offers this option.

I'm looking for the suitable sensors for this application !?
In particular, a very fast-response temperature sensor.

Has someone from the "BIG BOOST" people a good suggestion for me?

The following sensors found so far:

MAP Sensor:

AMS Alpha 4 Bar MAP Sensor

http://www.the370z.com/attachment.ph...1&d=1456924570

AAM 4 Bar MAP Sensor

http://www.the370z.com/attachment.ph...1&d=1456924573

AIT Sensor (Fast Response!!):

Bosch

http://www.the370z.com/attachment.ph...1&d=1456925445

GM Delphi

http://www.the370z.com/attachment.ph...1&d=1456925447

AIT/MAP Sensor (Combined):

http://www.the370z.com/attachment.ph...1&d=1456928032

If someone has a good experience, I would be happy about an answer!

Many thanks for the Support :tiphat:

:tup::tup::tup::tup::tup:

I'm using Omni 4bar for my A2A supercharged Z. I was told that it's better using Haltech 3bar if your using the A2W Stillen kit. I have also seen a few guys here who reported on incorrect scaling issue of their GTR 4bar map for their A2A SC kits.:)

Quote:

Originally Posted by Spooler (Post 3841303)

Dang man, you dug this one up from the grave.

Got a job for him.

Quote:

Originally Posted by swiss370Z (Post 3427147)

My whipple super charged Z is using the OMNI 4 bar tmap sensor. Eugene Turkov can hook you up with a good deal to include a custom wiring harness. This will allow you to get both speed density and true temp readings beyond what the stock MAF allow.

Strong antique thread resurrection in here!