Stillen Air to Air setup

JWillis72 · 10-14-2015, 05:12 PM

Right now it's on the Stillen piece. I hope to change it but me and this shop needed to go our own ways before they could build that or the brace like yours. The trans is coming out tomorrow to go to Level 10 then the shop that built the plates is going to work on the brace.

Sent from my iPhone using Tapatalk

370Z JT · 10-14-2015, 05:12 PM

What you are doing now is what BP said he was going to do later this Spring to his own kit?

Will you be selling the pipes or is it going to be one-off?

JWillis72 · 10-14-2015, 05:14 PM

No I had a local shop do it and have no interest in dealing with that again!

Sent from my iPhone using Tapatalk

JWillis72 · 10-14-2015, 05:16 PM

Top, I didn't read your post right. I'm not sure how it comes out the sc as they did that pipe last. I'm going up to the other shop tomorrow and I will get more pics.

It looks like a silicone 90 straight down out of the sc to a metal 90 in this pic to me.

Sales@F.I. Inc. · 10-16-2015, 03:44 PM

Quote:

Originally Posted by JWillis72

Nice Tow Bar!

- Kevin

JWillis72 · 10-16-2015, 03:51 PM

Quote:

Originally Posted by Sales@F.I. Inc.

Nice Tow Bar!

- Kevin

It work out great, thanks again!

Sent from my iPhone using Tapatalk

JWillis72 · 10-15-2015, 11:06 AM

This is the best pic I could get of the hot side. The wires are being moved.

Sent from my iPhone using Tapatalk

TopgunZ · 10-15-2015, 11:51 AM

Ok. Yeah I can see the t clamp back there off the sc. It is a 90*.

Have they started it yet?

JWillis72 · 10-15-2015, 12:16 PM

No, trying to schedule the tune for 2nd week of November. The trans should be back around the end of October to the beginning of November but SEMA is the first week of November.

TopgunZ · 10-15-2015, 02:06 PM

Exciting.

Before you put the front bumper on and button everything up, you should run a recirc hose from the engine bay down to your bpv. Not sure how often you daily your car but if you do you are going to wish the bpv wasn't so loud. This thing will scare people and become annoying to you after a while.

If you decide you don't want it then just pull the hose out later. Its much easier doing it that way then trying to run it with the bumper in the way.

TopgunZ · 10-15-2015, 02:07 PM

Oh and I just realized your missing a t bolt clamp on that other end of that 90!

JWillis72 · 10-15-2015, 02:24 PM

Thank you for catching that!

I didn't realize it was going to be that loud, I will run a hose just in case!

Sent from my iPhone using Tapatalk

JWillis72 · 10-16-2015, 10:00 AM

I found out level 10 now makes a 1000whp kit that shifts even faster, spent $1000 more than I planned.

Sent from my iPhone using Tapatalk

StillenZ84 · 10-16-2015, 12:46 PM

Quote:

Originally Posted by JWillis72

I found out level 10 now makes a 1000whp kit that shifts even faster, spent $1000 more than I planned.

Sent from my iPhone using Tapatalk

That is going to be crazy man. I know the 700whp shifts way faster than stock so I can't even imagine the 1000whp kit!

EVOHUNTER · 10-16-2015, 10:52 AM

dude that's crazy, pumped to see it done!

10-14-2015, 05:12 PM	#2 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	What you are doing now is what BP said he was going to do later this Spring to his own kit? Will you be selling the pipes or is it going to be one-off? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-14-2015, 05:16 PM	#4 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Stillen Air to Air setup Top, I didn't read your post right. I'm not sure how it comes out the sc as they did that pipe last. I'm going up to the other shop tomorrow and I will get more pics. It looks like a silicone 90 straight down out of the sc to a metal 90 in this pic to me. Last edited by JWillis72; 10-14-2015 at 05:26 PM.

10-15-2015, 11:51 AM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Ok. Yeah I can see the t clamp back there off the sc. It is a 90. Have they started it yet? __________________ ROTREX SUPERCHARGER TUNER KITS* - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-15-2015, 02:06 PM	#10 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Exciting. Before you put the front bumper on and button everything up, you should run a recirc hose from the engine bay down to your bpv. Not sure how often you daily your car but if you do you are going to wish the bpv wasn't so loud. This thing will scare people and become annoying to you after a while. If you decide you don't want it then just pull the hose out later. Its much easier doing it that way then trying to run it with the bumper in the way. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-15-2015, 02:07 PM	#11 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Oh and I just realized your missing a t bolt clamp on that other end of that 90! __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-14-2015, 05:12 PM	#1 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Right now it's on the Stillen piece. I hope to change it but me and this shop needed to go our own ways before they could build that or the brace like yours. The trans is coming out tomorrow to go to Level 10 then the shop that built the plates is going to work on the brace. Sent from my iPhone using Tapatalk

10-14-2015, 05:14 PM	#3 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No I had a local shop do it and have no interest in dealing with that again! Sent from my iPhone using Tapatalk

10-15-2015, 11:06 AM	#7 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	This is the best pic I could get of the hot side. The wires are being moved. Sent from my iPhone using Tapatalk

10-15-2015, 12:16 PM	#9 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	No, trying to schedule the tune for 2nd week of November. The trans should be back around the end of October to the beginning of November but SEMA is the first week of November.

10-15-2015, 02:24 PM	#12 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Thank you for catching that! I didn't realize it was going to be that loud, I will run a hose just in case! Sent from my iPhone using Tapatalk

10-16-2015, 10:00 AM	#13 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	I found out level 10 now makes a 1000whp kit that shifts even faster, spent $1000 more than I planned. Sent from my iPhone using Tapatalk

10-16-2015, 10:52 AM	#15 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	dude that's crazy, pumped to see it done! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM