370z AT With Stillen S/C And The Upgrades

mikey1600

When installing the larger 3.5" thick heat exchanger, no idea about the smaller one, there is no room to fit the part, I ended up mounting my heat exchanger underneath the crash bar, some people put it further in front, some people further behind. So depends on where you install your core I guess.

the heat exchanger core completely covers on my install where the metal shroud is meant to go, other people who installed the larger unit, reported not installing this part also and no issues with their idle, my idle is completely fine.

just keep it in mind when you do your install, if you have issues with the idle, you might have to fab something up, otherwise if you are going with the frozenboost core, you shouldn't really need to do anything

EliteXpress

A lil update had an issue with code P1239 from time to time. This code would of course put the Z into limp mode. Turn off back on and all good for a Day or Three. Code then started to show itself more frequent so after some research narrowed it to the jumper cable for the T/B. Mark from Stillen got me a new one shipped over. Changed out and now code free once again. Z now has 80K miles running and shifting just fine. Below is a lil fun from TX2K15 weekend!