Anyone can help me.... I want to know what parts do I need to make the Nismo 2015 rear bumper conversion.

Thanks!

Looking at the part numbers, as well as the kits offered online, it appears that you just need the bumper and the Side Retaining Brackets. There are different part numbers for the nismo rear fender liners, so the non-nismo ones may not line up perfectly, but I dont know yet.

Thanks bro! anyway im going to call to my dealer in the afternoon to see if I need another part!

Pages 1, 13, 21 (spoiler), 23, 24, 25.

Is that the front. Ur car looks awesome btw!

Yes, front tow hook cover.

Thanks!

Sent from my Nexus 6 using Tapatalk

Front bumper for sale if anyone is looking to do the conversion.

http://www.the370z.com/parts-sale-pr...r-bumpers.html

Does the one from Z1 have all the parts needed?

2015 NISMO 370Z Front Fascia Kit


It looks like it has everything but the LED's and emblems.

Z1 kit kills you on shipping, your best bet is to order the parts online through your nearest nissan dealer and pick them up. Let me know if you need the parts list

Yes please. :tiphat:

Required
FBM22-6GA0H Front bumper $387
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10
62023-6GA0A Tow Hook Cover Piece $6


Optional
63844-6GA0A Liner Front Fender Drivers Side $49
63844-6GA0A Liner Front Fender Passenger Side $49
62890-6GA0A Front Nismo Emblem $120
62228-89S0A Emblem Clip (2 required) $2



Prices may not be accurate for your Nissan dealer but were close to what I paid (minus tax).

You will need a center emblem (Nissan) as well.

Also to note, the non-nismo fender liners DO NOT properly fit with the bumper, however if you are comfortable with an imperfect fit (using zip ties to keep it close) they will work. Id suggest spending the extra $100 for a perfect fit.

Another note, the non-nismo Zspeed undertray also DOES NOT properly fit. You can connect it to the bumper, but then it sags in the middle (the 3 center connectors cannot touch) or you can connect the 3 center connectors but then the bumper connector area is 1.5" above the bumper connection points.

We have a shield for the 15 Nismo now, We are using our original 370z aluminum shield but are including a kit to space the center down with nut inserts for the core support and spacers for that area as well pre attached to the shield, This allows it to be directly bolted to the core support area where the plastic push clips normally would go.

sick:tup:

Any chance those of us who have the shield and did the conversion can purchase just the spacers???