Ebay Sunline Replica Urethane Lip Installed/review

2ndChance · 04-29-2012, 11:49 AM

I ordered this lip from ebay for $120 shipped, a real bargain at the time.

Shipment: It arrived quickly with VERY POOR packing, single layer cardboard and bubble wrap. 4 S shape metal clips and screws.

Quality: Urethane material, kinda wobbly, almost twice as thick as the oem lip but nowhere as firm. But it seems to resist more to cracking because it is quite flexible.

Fitment: I had to use my heat gun for about 2 hours and give it proper shape, when it came it did not properly fit into the bumper, specially in the middle part. Due to the material itself, it can bend with enough force.

Finish: Some spots required sanding and cutting off excess plastic.

Overall rating 3/5
If it wasnt for the mediocre shipping method and poor fitment, I would totally recomment it, but for the price I cannot really complaint. If you want a cheap lip, this is not a bad choice.

I used 3M brand auto glass urethane and 2 screws with thread lock at each side. Forget double side tape, this urathane silicone is awesome and the lip sticks firmly to the bumper., I'm sure it wont come off easily... Then after some sanding I applied few coats of plastidip, which didnt came out so great.. first time plastidipper...

The best thing about this lip, it does not sit lower than your stock underlip (sports version), and with stock height you have good clearance.

Some pictures

tonybui · 04-29-2012, 04:38 PM

Wheels look nice, plasti-dipped?

Mike · 04-29-2012, 07:39 PM

not bad for 120 and some elbow grease. Nice!

axio · 04-29-2012, 08:10 PM

I agree, looks good!

Waiz · 04-29-2012, 10:39 PM

Nice job getting it to fit

I would definitely recommend getting it painted and not leaving it PD'd

MattP725 · 04-29-2012, 11:07 PM

Yeah I know it is easy and all but I personally cannot stand the look of plasti-dip... looks like you have 5 decades of brake dust on the wheels and lip.

What is going on with the front pillar? Is that plastidip or unpainted?

2ndChance · 04-29-2012, 11:38 PM

Wheels were painted with matte dark gunmetal... Done 8 months ago

A pillar is covered with matte black vinyl... done 4 months ago

Front bumper middle is satin matte black... done almost a year ago

I'm planning to paint them with the same matte black.

carlitos_370z · 07-23-2013, 08:35 AM

im going to try to fit this same lip to my 2013

I know the front bumper its different but for $120.00... if I have to cut the lip to get fitted I don't care lol!!! some one have to try it

BTW 2ndChance do you have the oem suspension in this pics??

04-29-2012, 11:49 AM	#1 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	Ebay Sunline Replica Urethane Lip Installed/review I ordered this lip from ebay for $120 shipped, a real bargain at the time. Shipment: It arrived quickly with VERY POOR packing, single layer cardboard and bubble wrap. 4 S shape metal clips and screws. Quality: Urethane material, kinda wobbly, almost twice as thick as the oem lip but nowhere as firm. But it seems to resist more to cracking because it is quite flexible. Fitment: I had to use my heat gun for about 2 hours and give it proper shape, when it came it did not properly fit into the bumper, specially in the middle part. Due to the material itself, it can bend with enough force. Finish: Some spots required sanding and cutting off excess plastic. Overall rating 3/5 If it wasnt for the mediocre shipping method and poor fitment, I would totally recomment it, but for the price I cannot really complaint. If you want a cheap lip, this is not a bad choice. I used 3M brand auto glass urethane and 2 screws with thread lock at each side. Forget double side tape, this urathane silicone is awesome and the lip sticks firmly to the bumper., I'm sure it wont come off easily... Then after some sanding I applied few coats of plastidip, which didnt came out so great.. first time plastidipper... The best thing about this lip, it does not sit lower than your stock underlip (sports version), and with stock height you have good clearance. Some pictures

04-29-2012, 07:39 PM	#3 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	not bad for 120 and some elbow grease. Nice! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-29-2012, 08:10 PM	#4 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 16	I agree, looks good! __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Sunline / Shine Auto replica front lip (polyurethane)	CCastro	Northern California Region	6	12-27-2011 11:23 PM
F/S Replica Sunline rear spats FRP (socal)	Junior370z	Parts for sale (Private Classifieds)	21	05-11-2011 08:20 AM
Sunline replica rear lip	striderx88	Parts for sale (Private Classifieds)	4	04-27-2010 11:39 AM
LTH = Installed, Review	nixxer	Intake/Exhaust	74	04-22-2010 11:47 AM
VIS Carbon Fiber/FRP Replica Nismo Lip Kits - LOTS of INSTALLED Pics!!!!	ElementMotorsport	Body Interior/Exterior	28	04-02-2010 03:23 PM

04-29-2012, 04:38 PM	#2 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 427	Wheels look nice, plasti-dipped?

04-29-2012, 10:39 PM	#5 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	Nice job getting it to fit I would definitely recommend getting it painted and not leaving it PD'd

04-29-2012, 11:07 PM	#6 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 17	Yeah I know it is easy and all but I personally cannot stand the look of plasti-dip... looks like you have 5 decades of brake dust on the wheels and lip. What is going on with the front pillar? Is that plastidip or unpainted?

04-29-2012, 11:38 PM	#7 (permalink)
2ndChance Base Member Join Date: Feb 2011 Location: Panama Posts: 240 Drives: like he stole it Rep Power: 199	Wheels were painted with matte dark gunmetal... Done 8 months ago A pillar is covered with matte black vinyl... done 4 months ago Front bumper middle is satin matte black... done almost a year ago I'm planning to paint them with the same matte black.

07-23-2013, 08:35 AM	#8 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	im going to try to fit this same lip to my 2013 I know the front bumper its different but for $120.00... if I have to cut the lip to get fitted I don't care lol!!! some one have to try it BTW 2ndChance do you have the oem suspension in this pics??