Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Nismo 370z body panels (http://www.the370z.com/exterior-interior/7374-nismo-370z-body-panels.html)

tjlazer 06-19-2010 11:19 AM

Your list seems to have more than what this thread is saying is needed for a front conversion. Can we get a good list of what is actually needed for a front end conversion?

Greed 06-19-2010 02:58 PM

In addition to the front bumper itself, you need:

1) Part 62026M. This is the front diffuser.

2) Parts 62066 RH / 62066+A (LH) / 62066+B (RH)/ 62066+C (LH).
These are your right and left fender liners or "protectors."

3) A few extra standard rivets or screws that your dealer (or Z1 maybe?) will have readily available

4) And... paint! :-)

Optionally, you can buy the Nismo engine undertray for lotsa money but it is not necessary.

tjlazer 07-20-2010 05:24 PM

Quote:

Originally Posted by Greed (Post 584782)
In addition to the front bumper itself, you need:

1) Part 62026M. This is the front diffuser.

2) Parts 62066 RH / 62066+A (LH) / 62066+B (RH)/ 62066+C (LH).
These are your right and left fender liners or "protectors."

3) A few extra standard rivets or screws that your dealer (or Z1 maybe?) will have readily available

4) And... paint! :-)

Optionally, you can buy the Nismo engine undertray for lotsa money but it is not necessary.

I am told by my Nissan dealer that I also need the large fender liners that are in the wheel wells. Is this true?

EDIT, just got back and I ordered the front and side skirts! (For now, the rear and spoiler later) I did not order the fender liners, we shall see what happens! Stay tuned!

I hope to be the first Monterey Blue Nismo Z conversion! ;) :happydance: :ughdance: :driving:

tjlazer 07-20-2010 05:25 PM

Quote:

Originally Posted by Dustin@Z1 (Post 584428)
No problem...its been way to long and I should have posted all of these ALONG time ago. Give me a few minutes to knock out some emails and Voice mails and I will post up the rear wing, side skirts and rear fascia too.

And I will update the image above with one a clearer image. I did not realise how hard it was to view the text.

Dustin. Is there a status on your under tray splash shield adaptor?

Ambient 08-04-2010 02:05 AM

So you can order the stuff from the dealership for all the fittings now?
I am going to get a Touring Sport A/T and this kit looks amazing.

bullitt5897 08-04-2010 07:35 AM

Quote:

Originally Posted by Ambient (Post 658449)
So you can order the stuff from the dealership for all the fittings now?
I am going to get a Touring Sport A/T and this kit looks amazing.

Of you can contact Z1 and they will sell you everything you need with ZERO guess work... shoot they can even paint and install it too!

Ambient 08-04-2010 09:37 AM

Yea, I finally man-up'd and red the whole thread page by page.

I Pm'd him about the kit plus painting it.

I don't have my z yet, but I will shortly. Just waiting on to sell my Evo IX MR for 2/3 downpayment.

I will most likely order the kit right when I order my Pearl White 370z.
Then save up for carbon hood, roof, both pillars trunk and spoiler and set of Volks or Advan RS-Ds in black.

Ambient 08-04-2010 09:40 AM

I don't know about driving to GA with my work schedule tho haha.
I have a guy locally thats good at body work.

Dustin@Z1 08-05-2010 08:33 AM

Quote:

Originally Posted by tjlazer (Post 635881)
Dustin. Is there a status on your under tray splash shield adaptor?

I am currently working on it now. I got back the first prototype [had a few issues], I am now awaiting a new revision now.

As far as the aero parts, I will say this. Nissan North America has been extremely slow at getting these parts in the country. We have seen ridiculously long wait periods on some of the NISMO aero parts.

If you are considering the true NISMO Z34 aero package, be sure to plan a few weeks ahead or give me a shout. I can locate the parts anywhere in the country and let you know what is/is not available at that time.

Dustin

tjlazer 08-16-2010 05:37 PM

Quote:

Originally Posted by Dustin@Z1 (Post 660260)
I am currently working on it now. I got back the first prototype [had a few issues], I am now awaiting a new revision now.

Dustin

Please let me know asap as I am in the middle of doing my front and I will order this piece. I don't want to hack/drill my original one to fit if I don't have to.

I am getting my front and side skirts painted as I type! Keep posted!

First MB Nismo conversion...

tjlazer 08-16-2010 05:40 PM

Quote:

Originally Posted by Ambient (Post 658449)
So you can order the stuff from the dealership for all the fittings now?
I am going to get a Touring Sport A/T and this kit looks amazing.

Yep or you can order from Z1 if you are east coast to save on S/H.

tjlazer 10-20-2010 04:08 PM

Teaser shots!

http://www.the370z.com/members/tjlaz...comparison.jpg
http://www.the370z.com/members/tjlaz...comparison.jpg

ninous26 10-20-2010 06:07 PM

Saweeeeet!

Jeffblue 10-20-2010 06:10 PM

tj aren't you doing the full nismo conversion?

Jamaica 10-20-2010 06:20 PM

shoulda took out the nissan burger on the front.


All times are GMT -5. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2