Nissan 370Z Forum - Carbonsignal Nismo body/lip kit release

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Carbonsignal Nismo body/lip kit release (http://www.the370z.com/exterior-interior/73526-carbonsignal-nismo-body-lip-kit-release.html)

Carbonsignal Nismo body/lip kit release

Wow very nice for Nismo owners!

Will the triple fin defuser be in carbon fiber also?

Quote:

Originally Posted by Realale (Post 2389072)

Will the triple fin defuser be in carbon fiber also?

Yes Sir, all parts will be offered in both FRP and CF

In all the pictures diffuser is not installed just placed there with a small piece of tape for pictures as waiting for EVOR fog light then will install.

Tomorrow wil post one more picture with V3 diffuser

Wow!!!! I'm definitely getting in on this GB!!!

Thank you. In for GB

that looks so aggressive!!!! i love it

Just an idea that I always wanted. Is it possible for you guys to make inserts for the little air cut outs in the back bumper on the sides. I just think a piece of carbon would be so nasty in there and give the rear end more deffanition. Thanks kit looks dope hope GB is at a awesome price for us followers of your great build.

how close are the exhaust tips to the rear diffuser? they look really close. plus i think the front lip would look better if it wrapped around inside the wheel well just a few inches.

all in all, not bad looking stuff!

I'll let you all know how they look in person. Leaving for Dubai tomorrow!

Wow... view from the side. The flow from fender to front skirt is very clean.

Quote:

Originally Posted by zilverbullet (Post 2389198)

Wow... view from the side. The flow from fender to front skirt is very clean.

agreed:tup:

Nice work. Amuse next?

Oh DAAAANG that looks nice! I absolutely love how the line from the lip kinda points to the line on the fender vent.

Can't wait to see that V3 diffuser.
You guys are my favorite body parts company.

Oh Great. I will never get out of debt now..

If I didn't still have to pay for the supercharger, I would be all over this.

darn! should have gotten a nismo! the kit loooks awesome!! not a fan of the wing part

Do you guys make a rear diffuser for the stock 370s with that fog light delete?

do those fenders only fit nismo?

Not like these, only our type-V diffuser for the stock Z at this time. It is a varis rear diffuser replica, available in Frp and CF.

Quote:

Originally Posted by songbong (Post 2389395)

do those fenders only fit nismo?

No, they fit all 370Z'z my good man.

omg stop. I got this car to pick up girls, now i wont have any money to spend on them because i love my car more.

Quote:

Originally Posted by CarbonSignal (Post 2389103)

V3 diffuser? there's a third one? So glad someone finally listened to nismo owner. that front lip is gorgeous. Thank you CS!

How does the front lip attach? Does it replace the undershroud?

tacky comes to mind. Especially when that car is not lowered. My Nismo would EAT that front lip on the pavement if it where any longer than the stock front bumper lip

Quote:

Originally Posted by mwhit02 (Post 2389493)

tacky comes to mind. Especially when that car is not lowered. My Nismo would EAT that front lip on the pavement if it where any longer than the stock front bumper lip

Yup...I want that lip, but wondering about the same thing and the rear diffuser is out for me too because I have 5" tips. I hate it when stuff like this happens. To many damn choices. :owned:

Quote:

Originally Posted by mwhit02 (Post 2389493)

tacky comes to mind. Especially when that car is not lowered. My Nismo would EAT that front lip on the pavement if it where any longer than the stock front bumper lip

Think I saw ur face at the post office yesterday. lol

I need this in my life. Too bad I'm too in debt to afford it I'm sure

Hmm looking at the rear diff better I think it needs to follow all the way to each side of the car. Kinda like this, excuse the 5s mspaint job, you get the idea.

http://i108.photobucket.com/albums/n...psfab4c017.png

Also, from profile it just looks like something is hanging off the car's butt, maybe extending the piece towards the front of the car where the wheel arch begins. From yellow arrow to the red line shown here:

http://i108.photobucket.com/albums/n...ps0818c2e0.png

While I am at it, here's another suggestion :icon17: How about extending the CF piece in the fender all the way down to the side blade. Like this:

http://i108.photobucket.com/albums/n...pse1d8554d.png

Side profile with extended fenders and extended rear diffuser to wheel arch:

http://i108.photobucket.com/albums/n...psfee6a360.png

Anyway, just my opinion

Quote:

Originally Posted by Ron (Post 2389696)

Hmm looking at the rear diff better I think it needs to follow all the way to each side of the car. Kinda like this, excuse the 5s mspaint job:

http://i108.photobucket.com/albums/n...psfab4c017.png

you get the idea.

Also, from profile it just looks like something is hanging off the car's butt, maybe extending the piece towards the front of the car where the wheel arch begins. From yellow arrow to the red line shown here:

http://i108.photobucket.com/albums/n...ps0818c2e0.png

While I am at it, here's another suggestion :icon17: How about extending the CF piece in the fender all the way down to the side blade. Like this:

http://i108.photobucket.com/albums/n...pse1d8554d.png

Side profile with extended fenders and extended rear diffuser to wheel arch:

http://i108.photobucket.com/albums/n...psfee6a360.png

Anyway, just my opinion

I agree with the rear part but the sideskirts have to be like that because it is a universal fit for all 370z, not just the Nismo skirts.

I meant extending the CF piece on the fender further down so that it meets with the blade on the sideskirt. What would change is the fender not the sideskirt/blade.

damn very good points.

Looks much better. QUOTE=Ron;2389696]Hmm looking at the rear diff better I think it needs to follow all the way to each side of the car. Kinda like this, excuse the 5s mspaint job, you get the idea.

http://i108.photobucket.com/albums/n...psfab4c017.png

Also, from profile it just looks like something is hanging off the car's butt, maybe extending the piece towards the front of the car where the wheel arch begins. From yellow arrow to the red line shown here:

http://i108.photobucket.com/albums/n...ps0818c2e0.png

While I am at it, here's another suggestion :icon17: How about extending the CF piece in the fender all the way down to the side blade. Like this:

http://i108.photobucket.com/albums/n...pse1d8554d.png

Side profile with extended fenders and extended rear diffuser to wheel arch:

http://i108.photobucket.com/albums/n...psfee6a360.png

Anyway, just my opinion[/QUOTE]

Yeap, I think it ties everything together and flows much better. The diffuser is pretty much picking up where the side blade left off. With that and the extended fenders it looks like everything is a "single piece" vs several different stick-on parts.

What do you think CS?

Thanks guys for the comments, keep them coming will try to reply as they come.

First thing is maybe I wrote it up there as well, we are waiting for the fog light so both the diffusers are not installed in the pictures they are just stuck with a tape in the middle for pictures purpose, we packed driver side with some cloth to move it up the exhaust but i guess didnt succeed properly. As its difficult to get a nismo to work on so for the pictures we just placed the diffusers for picture purpose.

There wont be any gap anywhere between the diffuser and the body either on side or top and final gap between stock exhaust and diffuser is almost close to one finger, not like in pictures its hanging on tips because not stuck properly. The owner wants to install once light is here as we usually we silicone to stick parts

Quote:

Originally Posted by dmhenderson (Post 2389435)

How does the front lip attach? Does it replace the undershroud?

No it doesn't replace anything comes on top of it more like slides on it. Will take some pictures to show that and height.

Quote:

Originally Posted by Ron (Post 2389696)

:tup: we thought about making a full piece but then only people who would have cried were people here, making a full piece increase the size for shipping, as an idea making sides shipping will jump 150-200$ because of the whole package side.

We are always up to do it custom for anyone interested but as a product which we plan to sell mass wont work out that much at this stage, maybe after selling for few months and looking at the response and purchase we can do a revised version.:tiphat:

Quote:

Originally Posted by Ron (Post 2389696)

While I am at it, here's another suggestion :icon17: How about extending the CF piece in the fender all the way down to the side blade. Like this:

http://i108.photobucket.com/albums/n...pse1d8554d.png

Side profile with extended fenders and extended rear diffuser to wheel arch:

http://i108.photobucket.com/albums/n...psfee6a360.png

Anyway, just my opinion

That more like 350Z superleggara again as I said earlier current side skirts will go with stock or other vendors fenders and dont want to limit people buying either both together or nothing. As when you make the outer/removable fender piece bigger then side skirts needed to be adjusted accordingly.

Quote:

Originally Posted by Amuse370z (Post 2389765)

I agree with the rear part but the sideskirts have to be like that because it is a universal fit for all 370z, not just the Nismo skirts.

Yes and No:icon17:

Universal yes, but will fit only Nismo not regular 370z

Quote:

Originally Posted by Ron (Post 2389774)

I meant extending the CF piece on the fender further down so that it meets with the blade on the sideskirt. What would change is the fender not the sideskirt/blade.

Quote:

Originally Posted by Ron (Post 2389829)

I replied for diffuser want to keep the size small:tiphat:

Are people interested in buying full kit more or individual pieces? and CF or FRP/FRP painted? just working out GB prices lol

Im hoping for the full kit in carbon fiber please :tup:

I just wanted the 3 fin diffuser in CF.

I want everything in CF except the spoiler part.

Quote:

Originally Posted by Amuse370 (Post 2389927)

Im hoping for the full kit in carbon fiber please :tup:

:icon14:Your name.......your picture is a Nismo :icon23::tup: