EVO-R 3pc Lip Installed

Alstann · 04-29-2013, 12:34 PM

Just wanted to show off my lip I finally installed! After a few debacles along the way prior, heh.

Gotta say, I think it's the best looking lip, next to the Top Secret lip or a whole new bumper.

I had to do quite a bit of trimming with a bench grinder to get the center carbon fiber piece to play nice with the fang cover, though.

Aznsensazn · 04-29-2013, 01:13 PM

Looks great dude!

Sent from my HTC_Amaze_4G using Xparent BlueTapatalk 2

Vichtz · 12-18-2013, 11:59 AM

I'm resurrecting this because I am about to try the same thing. Any advice or problems that I should be acutely aware of before undergoing this project?

speedfreek · 12-18-2013, 12:21 PM

Hmm I wonder if I could make a cf fang cover work with the stillen splitter. I've been trying to pick up a used one to try but they disappear minutes after popping up. I am tired of cleaning the plastidip on the fangs!!!

Looks great! It was a tough decsion between the stillen splitter, evo-r, and ings+1 for me. Carbon Signal have/had a couple tope secret lips on sale in FRP. If I didnt already have the stillen I would of jumped on their deal.

andbui05 · 12-19-2013, 12:43 PM

Quote:

Originally Posted by Vichtz

I'm resurrecting this because I am about to try the same thing. Any advice or problems that I should be acutely aware of before undergoing this project?

Vichtz where are you going to be installing your lip? I'm down in Houston and thinking of getting this lip myself but I want to see if there's any fitment issues first. I wouldn't mind meeting you up to help with your installation if you're close enough. CS is a bit too far though lol.

Vichtz · 12-19-2013, 10:15 PM

Quote:

Originally Posted by andbui05

Vichtz where are you going to be installing your lip? I'm down in Houston and thinking of getting this lip myself but I want to see if there's any fitment issues first. I wouldn't mind meeting you up to help with your installation if you're close enough. CS is a bit too far though lol.

Sometime next year, probably mid year, I'll be in Houston at the MEPS to swear in (depending on what my OCS board says). If you haven't snagged one by then I'll be happy to swing by haha.

Sent from my iPhone using Tapatalk

loiro370z · 12-19-2013, 06:33 PM

Quote:

Originally Posted by Vichtz

I'm resurrecting this because I am about to try the same thing. Any advice or problems that I should be acutely aware of before undergoing this project?

Read this

EvoR Fron Lip problem

kenchan · 12-18-2013, 03:13 PM

the ings+ fits with no cutting even with the cf fangs.

speedfreek · 12-18-2013, 03:44 PM

Quote:

Originally Posted by kenchan

the ings+ fits with no cutting even with the cf fangs.

We all know it's photoshopped so you can kindly

( Click to show/hide )

kenchan · 12-18-2013, 03:47 PM

Quote:

Originally Posted by speedfreek

We all know it's photoshopped so you can kindly

( Click to show/hide )

you dont like my photochop skillz?

speedfreek · 12-18-2013, 03:50 PM

Nope, it is too realistic

kenchan · 12-18-2013, 03:52 PM

Quote:

Originally Posted by speedfreek

Nope, it is too realistic

crap, i need to work on this more then... it's hard to make faux bits. maybe i should ask some of the vendors here for insight. lol

equalme · 12-18-2013, 05:04 PM

Quote:

Originally Posted by kenchan

the ings+ fits with no cutting even with the cf fangs.

Hey kenchan-

Does the Ings sit lower than the chin spoiler? I scrape the chin spoiler a few times every day and I'm just lowered on swifts.

kenchan · 12-18-2013, 06:32 PM

Quote:

Originally Posted by equalme

Hey kenchan-

Does the Ings sit lower than the chin spoiler? I scrape the chin spoiler a few times every day and I'm just lowered on swifts.

The ings have more clearance vs the sport air deflector.

jlo370z · 12-19-2013, 06:50 PM

Quote:

Originally Posted by equalme

Hey kenchan-

Does the Ings sit lower than the chin spoiler? I scrape the chin spoiler a few times every day and I'm just lowered on swifts.

there is not much more clearance then the chin spoiler, mine has bottomed out a couple times. but im always scraping the big plastic protector piece underneath. i dont know how people go lower.

like my side skirts, i can not make a fist and put it under my car.

either way, the ings is a work of art and worth the purchase

04-29-2013, 12:34 PM	#1 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 14	EVO-R 3pc Lip Installed Just wanted to show off my lip I finally installed! After a few debacles along the way prior, heh. Gotta say, I think it's the best looking lip, next to the Top Secret lip or a whole new bumper. I had to do quite a bit of trimming with a bench grinder to get the center carbon fiber piece to play nice with the fang cover, though. DarkJak, speedfreek, UnReal and 2 others like this. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

12-18-2013, 11:59 AM	#3 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	I'm resurrecting this because I am about to try the same thing. Any advice or problems that I should be acutely aware of before undergoing this project? __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

12-18-2013, 12:21 PM	#4 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	Hmm I wonder if I could make a cf fang cover work with the stillen splitter. I've been trying to pick up a used one to try but they disappear minutes after popping up. I am tired of cleaning the plastidip on the fangs!!! Looks great! It was a tough decsion between the stillen splitter, evo-r, and ings+1 for me. Carbon Signal have/had a couple tope secret lips on sale in FRP. If I didnt already have the stillen I would of jumped on their deal. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

12-18-2013, 03:13 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	the ings+ fits with no cutting even with the cf fangs. TenaciousZ, BeemaaZ, speedfreek and 2 others like this.

12-18-2013, 03:50 PM	#11 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	Nope, it is too realistic __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

04-29-2013, 01:13 PM	#2 (permalink)
Aznsensazn Base Member Join Date: Dec 2012 Location: Texas Posts: 96 Drives: 12' PW Touring AT Rep Power: 12	Looks great dude! Sent from my HTC_Amaze_4G using Xparent BlueTapatalk 2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ark dt-s installed!!!!	richiivu	Intake/Exhaust	23	01-29-2014 04:44 PM
Does anyone have this installed???	DEpointfive0	Engine & Drivetrain	4	09-26-2012 11:02 PM
HFC installed	pokeyl	Intake/Exhaust	6	11-25-2011 08:23 PM
Gtm sc installed	Mrbiker	Forced Induction	3	10-01-2011 09:31 AM
F.I. CBE Installed	Pablo Z	Intake/Exhaust	5	01-20-2010 09:58 PM