Nissan 370Z Forum
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Carbon Fiber Instrument Bezel (http://www.the370z.com/exterior-interior/70014-carbon-fiber-instrument-bezel.html)

Wonka2581 05-28-2013 03:28 AM
Quote:
Originally Posted by CarbonSignal (Post 2335443)
Hopefully in next two weeks, did something on the part but couldn't continue as had lots of work because of a big shipment leaving of around 70 pieces for US but very soon.
:happydance::tup:

cinellipro 06-12-2013 04:13 PM
Ready for Installation
 
1 Attachment(s)
So I pulled out the face of the fuel/temp gauge. It was easy. Using one hand, don't squeeze too hard and slowly pull it toward you. Once it releases, make sure you are not pulling the light strip that sits just behind the cover. Be aware that Nissan does not sell the gauge cover as an individual part.
I then painted it. It is a big improvement over the silver face.

Now I'm just waiting on the carbon fiber instrument cluster. Yep...just waiting.
:tiphat:

kenchan 06-12-2013 04:20 PM
Quote:
Originally Posted by cinellipro (Post 2360046)
So I pulled out the face of the fuel/temp gauge. It was easy. Using one hand, don't squeeze too hard and slowly pull it toward you. Once it releases, make sure you are not pulling the light strip that sits just behind the cover. Be aware that Nissan does not sell the gauge cover as an individual part.
I then painted it. It is a big improvement over the silver face.

Now I'm just waiting on the carbon fiber instrument cluster. Yep...just waiting.
:tiphat:
huh, cool. wait, so you just pull on the piece? dont need to take the cluster out or anything?

no snaps or tabs or screws to worry about? :confused:

cinellipro 06-12-2013 04:30 PM
There are four tabs/snaps/square thingies, but there was no additional resistance. I'm not saying you should do this, but once it pulls off I immediately stopped the pulling motion and turned it to make sure it was not connected to anything. It wasn't. Masked the window and painted the facade, inside and outside sides. It then snapped back in place.

kenchan 06-13-2013 10:20 AM
Quote:
Originally Posted by cinellipro (Post 2360070)
There are four tabs/snaps/square thingies, but there was no additional resistance. I'm not saying you should do this, but once it pulls off I immediately stopped the pulling motion and turned it to make sure it was not connected to anything. It wasn't. Masked the window and painted the facade, inside and outside sides. It then snapped back in place.
^^ :tup: thanks. :D

Chuck33079 06-13-2013 10:21 AM
Quote:
Originally Posted by CarbonSignal (Post 2335443)
Hopefully in next two weeks, did something on the part but couldn't continue as had lots of work because of a big shipment leaving of around 70 pieces for US but very soon.
Any updates on this?

cinellipro 08-10-2013 11:48 AM
Carbon fiber instrument bezel
 
Haven't heard anything yet, but considering it's the one interior piece that is most in the visual filed there would be an interest in making it. Gotta be patient. :driving:

CarbonSignal 08-11-2013 12:42 AM
We have been really busy with new items for Z and some other cars but will try to get it done sometime this month

tanamerra 08-11-2013 09:14 AM
Interested
 
When you get caught up i also would be interested in this item. Looking forward to receiving the items i already ordered.

FYI i have been to Dubai several times as well as Abu Dhabi. Enjoyed my visits there.

Shadezz 08-11-2013 09:55 AM
Looks like something to consider....I'll keep an eye out for a group buy!!

AreJay 08-11-2013 11:25 AM
Looks great

Carbon Fiber Element 08-11-2013 01:02 PM
If anyone wanted to rip theres apart they could send it in to us as well to have it wrapped in REAL cf. Hit us up!!!

CarbonSignal 08-12-2013 12:02 AM
Quote:
Originally Posted by Carbon Fiber Element (Post 2441671)
If anyone wanted to rip theres apart they could send it in to us as well to have it wrapped in REAL cf. Hit us up!!!
:tup:

See there are always options to wrap or replace

Jdmspeed-Z 09-19-2013 07:13 PM
UpdAte intrested as well

CarbonSignal 09-30-2013 10:28 AM
TEEEEEEASER

http://i622.photobucket.com/albums/t...ps3a185107.jpg


All times are GMT -5. The time now is 08:38 PM.
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2