Tore my bumper, what to do about this??

rhd · 08-31-2012, 05:41 PM

If it were me and I did not want to but a new bumper this is what I would do.

Pull the bumper off, they come off really easy. Get it back together as best as you can with something that will hold the tear as close as possible temporarily like super glue gel, and some clamps or tape, just something to hold it together so it stays in place.

Put some good masking tape on the outside so the glue does not weep through.

Get a small piece of fiberglass cloth, rough up the inside all over so the epoxy will stick. Mix up some high-end epoxy resin, coat the inside, put down the cloth, coat the cloth. Let it dry

Install lip of choice, if there is a small part still showing a good auto-body shop or dent guy can fix the rest, only you will know its there.

With the new lip on you will be fine, its not like everyone is crawling around on the ground looking at the underside car.

Good luck.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTT base Z bumper for Nismo bumper	amusez34	Parts for sale (Private Classifieds)	25	06-18-2012 11:52 AM
bumper to bumper warranty length?	JAYNO20	Nissan 370Z General Discussions	18	05-31-2012 04:10 PM
[FOR SALE] SOCAL: OEM PW Front Bumper/Rear Bumper/Side Skirts/Fenders	Fly1 Motorsports	Parts for sale (Private Classifieds)	11	02-03-2012 06:17 PM
MB Front bumper, rear bumper and Side skirts	Jamaica	Parts for sale (Private Classifieds)	9	12-22-2010 12:46 PM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 08:25 PM

08-31-2012, 05:41 PM	#21 (permalink)
rhd Enthusiast Member Join Date: Feb 2012 Location: In the shop Posts: 281 Drives: Women Crazy Rep Power: 15	If it were me and I did not want to but a new bumper this is what I would do. Pull the bumper off, they come off really easy. Get it back together as best as you can with something that will hold the tear as close as possible temporarily like super glue gel, and some clamps or tape, just something to hold it together so it stays in place. Put some good masking tape on the outside so the glue does not weep through. Get a small piece of fiberglass cloth, rough up the inside all over so the epoxy will stick. Mix up some high-end epoxy resin, coat the inside, put down the cloth, coat the cloth. Let it dry Install lip of choice, if there is a small part still showing a good auto-body shop or dent guy can fix the rest, only you will know its there. With the new lip on you will be fine, its not like everyone is crawling around on the ground looking at the underside car. Good luck.