06-15-2012, 02:37 PM
|
#7 (permalink)
|
|
Enthusiast Member
Join Date: Dec 2011
Location: San Diego, CA
Posts: 297
Drives: 2012 Sport M6
Rep Power: 14
|
Quote:
Originally Posted by Shotta
So you pried it off from the outside without collapsing and pushing on the tabs first on the inside? I might have to try your method after I collapse the tabs again. In my case it feels like someting else is holding up top other then the 2 tabs because I was pushing on both of them at the same time with enough force to fold the mirror housing forward but I achieved absolutely no seperation between the cover and the mirror housing.
I think I have the demon mirror cover.
|
Which side...driver/passenger?
I started from the bottom-inside corner on the exterior of the mirror cover. The corner enabled me to fit my pry tool easier. I gently pryed little by little around the bottom cover until I could wiggle and pop it off. This may not be the service manual way, but worked for me. Just be careful.
If you're still struggling with it, I could possibly make a vid.
|
|
|
Similar Threads
1Likes
Threaded Mode
