My turn w/ the Short Shifter install, here is the knob I used!
 

First thanks to MiniCobra1 for the info on TWM weighted shifters!
Thanks to Josh@STILLEN for the deal on the B&M S.Shifter!
Thanks to TheHack for the DIY write up for the shifter replacement!
Interior pretty easy to disassemble!
http://img35.imageshack.us/img35/108...eplace1.th.jpg
Nice having access to a lift!
http://img35.imageshack.us/img35/375...eplace3.th.jpg
Filed down corner for Reverse!
http://img35.imageshack.us/img35/629...eplace2.th.jpg
Installation completed!
http://img35.imageshack.us/img35/165...eplace6.th.jpg
Here is a photo to show engraving!
http://img35.imageshack.us/img35/871...eplace1.th.jpg
I made a boot tie down from a faucet spacer and zip ties. This allowed me to shorten the boot slightly & allowed for lowest knob location on the shaft.
Here is the boot stretched in reverse.
http://img35.imageshack.us/img35/647...eplace4.th.jpg

My goal was an OEM look! The short shifter shifts just like an R8 (which is gated) but shorter throws. Very happy with both products!!
The shift knob is TWMPerformance Type R satin finish engraved (currently on sale).
Thanks :driving:

Thanks for the pics. The filing of the corner is just the pic I was waiting to see.

That's a nice knob....quite heavy and looks good.

Just FYI, for a cheaper alternative, the greddy counter-weighted knob has good weight and decently priced.

The filing was the only part that sucked, but once that is done it is pretty easy. My only thing I have left to do with mine is I did not re-use the spring and aluminum bracket from the stock unit and after a few weeks without it I want it back.

I reused the spring but stretched it slightly for more force! The weighted shift knob feels like it helps with the vibration in the shifter also! :tup:

how did you fasten the boot down with this new knob. I'm looking at the same one and wanted to see if your boot is secure... and how you did it. Zip ties?
thanks

EXACTLY! I took three zip ties and made a fastener just like the stock fastener with the boot ends pulled through and tightened it down to the smaller shaft diameter. Took a little patience but simple and cheap.

I used a rubber bushing about the same diameter as the shaft. Also a Redline (real) leather boot with the smaller hole made it all come together:

http://images51.fotki.com/v1584/phot...MG_2082-vi.jpg

Yep, Same idea here with a plumbers faucet spacer along with the zip ties!

I plan on doing something different with my interior so held off on the after market boot. :tup:

I've looked and looked, but I can't find an aftermarket shift knob for the 7AT. Do any of you know where I could find one? :confused:

Why the blue?

I'm guessing to match his exterior.

To match his blue Sparco seats

Sweet nice short and stuby shifter. Just the way I like it. How's the grip during shifting? I too have a metal shift knob in my shifter and when it's hot that thing burns the heck out of my hand so have to wait a few minutes before I drive off. Hope you have a sunshade.

I learned also to use a sunshade. Before I had a sunshade I put a small sock on it. Now I'm dealing with the cold metal with the few cold days we get here in Atlanta. (no big deal though)
The Satin finish feels nice!!

Bingo!

Put the boot in before the Sparco's....;)\

http://images52.fotki.com/v637/photo...MG_2167-vi.jpg

Is it just me .. since I am at work .. they occasionally block pics hosted by certain websites .. but I can not see the pics from the O.P. at the very top. Can anyone else see them without issue? If so, then it would confirm my suspicion that my job is blocking the pics. If not, then what happened to the pics?

Nope.. there are 3 pics no longer at imageshack.. red x's

OK .. thanks for the confirmation.

Correct! I dumped them once the thread originally died out!

Threads never die.. you should know that! ;)

True Indeed!! :driving:

ve looked and looked, but I can't find an aftermarket shift knob for the 7AT. Do any of you know where I could find one? :confused:

:hello: Ace that blue shift boot!

Type R Shift Knobs - TWM Performance Weighted Shift Knobs

I just need clarification if the 350 knob works for our 370.

:tup: Yes!

S-w-e-e-t! I've got an AT, though--flawless, so far! Nice job, man.

What color stitching is that? Does it match up with the OEM stitching?

Someone is due for a visit to the eye doctor for some new glasses...

LOL! I actually do need to go see the eye dr.
It kinda looks white but when you look closer is looks like light grey.