|
STILLEN Front Fascia with Brake Air Cooling installed
finally I realized one of my long awaited exterior modification and installed the STILLEN front fascia along with the new released brake cooling package.
http://fbcdn-sphotos-a.akamaihd.net/...45761336_n.jpg the fitment of the STILLEN front was excellent as expected - we only had to cut out the holes for the headlamp water nozzles which are mandatory in Germany for XENON equipped cars. http://fbcdn-sphotos-a.akamaihd.net/...11157447_n.jpg here you see the full line of cooling starting with the brake air inducts, PS cooler, air inlet for the STILLEN Gen3, MOCAL oil cooler and behind is the STILLEN transmission cooler (not visible). http://fbcdn-sphotos-a.akamaihd.net/...63707179_n.jpg the routing of the brake cooling hoses is perfect and directs the air exactly towards the brake discs - cant wait to see the difference on the track. stay tuned for more pics soon when the race mesh is installed ! Chris |
Niiiiiccceee!!!
|
That's awesome man! Nice work! :tup:
|
|
awesome!!!!!
|
very nice set up! Loving it. :tup:
|
Looks great. I would kinda imagine it would look better with the stripe going all the way down instead of stopping at the hood line though
|
Looks great. Any plans to add mesh in the grill opening?
|
I like the way that looks. Great mod!
|
The sexiest bumper for 370z IMO
Very nice setup! |
does stillen sell the mesh for the bumper ?
|
I didn't care for this bumper until now. It looks quite good on your car.
|
Love the bumper. Car looks mean.
Any chance you can post a picture of the side of the car? Curious how the bumper flows with the side view. |
I have ordered the mesh from STILLEN and it will be installed soon, left it off for now as I intend to do the strips on the front and some mat black inside the big opening.
As soon as the car is completely finished with stripes and mesh I will post more better pictures also from the side ;) Chris |
What are you planning to go with for the rear as far as aero? I'm seriously thinking of going the Stillen route for the simple fact that it's urethane and a fraction of the cost of the only other urethane option (Nismo).
|
Narrow garage...
|
Looks awesome!! I only wish it came in one piece...
|
Looks really good IMO. I wonder if it'll clear a GTM Supercharger kit's intercooler and oil cooler.... Hmmmmmm...
|
Glad to see yours fit well, but watch out guys, I have this bumper and the fitment on mine is awful. There is a very large gap by my left headlight. Even though the bumper looks great that gap really bothers me, ill post a pic of it a little later tonight.
|
Quote:
|
[UQUOTE=SmallermouseZ;1763088]Was urs an authentic stillen?[/QUOTE]
Ya ordered by my shop straight from them. |
1 Attachment(s)
Maybe a little hard to see but the gap is big enough to stick my finger in there. Never even bothered to contact stillen about it since it would cost me most likely about another $400 to get a new one put on, simply isn't worth it.
|
Nice! I'm still kinda iffy if I want it or not. I like it, but I real want to see it in person. Anyone in the Tampa, FL area have it installed on their Z?
|
Ugh I hate that they use orange ducting... the only reason that I haven't already ordered the kit. I know it is barely visible but it still bothers me.
|
Quote:
I don't think anyone has made a replica of it. |
Quote:
Can you show some detailed photos of the rest of the fitment around the nose of the car? Thanks and regardless of the gap, your car looks awesome. Now that the brake cooling kit is out, I may reconsider the bumper again. It is the only one that I have considered. |
Not usually a big fan of this front without a huge IC, but I am feelin the way it is looks on your car. Soo aggressive! MEAN!
|
Thinking of ordering this front clip now.
|
Oleg that fitment is horrible. I would def ask for a full refund.
|
I had the first production one. Like their red car, it had a dimple in the front part and fitment on the drivers side was a little off. I have subsequently replaced it with a newer one, last september due to grinding the bottom off from being too low on the track, and fitment is much much better now.
|
The front center of this kit is perfection. The side vents look ridiculous. Instead of gaping vents, it should have been more subtle slots. In the pics, it looks like the car is black and the bumper is grey. Is it unpainted or was it hard to get a match? I would hate to have a front bumper with improper fitment. Is it only the headlight? The hood and top bumper don't look very well aligned either.
|
Quote:
|
my car currently is with the wrapping guys for adding the red stripes - as soon as I get it back (hopefully tomorrow) I will make more and better pictures also with detailed pics around the headlights.
From my point of view the fitment is very very good - havent experienced the problems you describe. For the orange pipes, those will not be visible after I added the supplied front mesh. Chris |
|
Some mesh for the front and wheel spacers and your set.
|
mesh installed - here you go :-)
https://fbcdn-sphotos-c-a.akamaihd.n...02308932_o.jpg https://fbcdn-sphotos-b-a.akamaihd.n...76683148_o.jpg Chris |
OMG man your car looks :yum: !!!
I want that front fascia soooo bad now !!! |
Lookin' GOOD! :D
|
finally no more hiding when playing with the big boys :-)
http://fbcdn-sphotos-b-a.akamaihd.ne...11958810_o.jpg |
dope!!!!!!!!!!!!!!!!!! It definitely looks like it belongs with the rest... :)
|
| All times are GMT -5. The time now is 04:51 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2