EVO-R Full functional diffuser
 

Finally have some time to work on the diffuser. Been really busy on our new Asia headquater. Pic pic...

http://www.evo-r.net/product/370Z/di...L/IMG_4887.jpg
http://www.evo-r.net/product/370Z/di...L/IMG_4905.jpg
http://www.evo-r.net/product/370Z/di...L/IMG_4888.jpg
http://www.evo-r.net/product/370Z/di...L/IMG_4892.jpg
http://www.evo-r.net/product/370Z/di...L/IMG_4906.jpg

can you post a clearer pic in day light? thanks.

cant really see it, however wouldve loved to have this when i had my Z

Do you have any kind of light you could put low/behind it so we could see it better?

Pricing?

Thanks!

Will take more pics when its day time.

Here are the photos after a quick and nasty edit in PS.

Hope they help,

http://farm8.staticflickr.com/7172/6...fa2d891d_o.jpg
IMG_4887 by J M Gale, on Flickr

http://farm8.staticflickr.com/7169/6...a087e868_o.jpg
IMG_4888 by J M Gale, on Flickr

http://farm8.staticflickr.com/7147/6...eca8643d_o.jpg
IMG_4905 by J M Gale, on Flickr

http://farm8.staticflickr.com/7019/6...a55e0067_o.jpg
IMG_4906 by J M Gale, on Flickr

I have an unrelated question, What are the offsets for the rims on the 370z in the picture? and rim sizes?

Hey Jay, just thought i could help :hello:

http://farm8.staticflickr.com/7168/6...232a6c5e_b.jpg

http://farm8.staticflickr.com/7011/6...252f621c_b.jpg

looking good nonetheless!! :tup:

hangs a little low for me.
In for better pics!

Yah that's going to tear off at speed bumps? :confused:

Thanks guys. This Z is very low with cusco high/low kit. Rims are new Volk TE37 19"

evor- are you going to offer side pieces with that unit? can the braket be placed on the inside plane? it looks kinda :icon14: from the side as you can see metal bracket and screws...

sEXY!

Seems really low. Is it adjustable? Any test data for a "functional" body piece? I'm very interested based on the answer to those questions.

Center part seems crooked in the first pic. Is this the final production product? Still looks kind of raw...unfinished.

In for better pics and production version.

doesnt look that low to me. theres still quite a bit of wheel/fender gap

The vents are too gaping like it was fitted for another car.

Not everyone is a fan of the pointless hellaflush look

^^ does it have to be "hellaflush" to be low? I dont think so...
What i meant is that the car has an average drop, its not slammed. and the difuser looks close to the ground already

Just say'n, that drop looks pretty good to me. I personally wouldn't go any lower than that... you're more than welcome to do what you want. Also, a functional diffuser is suppose to be close to the ground...just say'n.

I would have prefered a fully fuctional rear diffuser with vertical fins and covers the underside more, like the one on the 458

http://azis313354.files.wordpress.co...-rear-view.jpg

I think the drop looks good too? :ugh2:
im just concerned about ground clearace since i go over some tall speed bumps at work and my Z is my daily driver

and dips on the expressway...

for a track-only car sure... but for a DD that will get scraped to sh*t

I totally think this won't work out very well..

Bracket will be inside for final prodcut. So won't cover the CF part. Need to work on the sides.

The bracket is adjustable base on type of exhaust you have. On this white Z we have Invidia exhaust on. Test data ...No.

Still need to make the center part more fitted and flow with the car.

This is exactly what I was about to ask. If you make the piece look more level and bring the center part up, it would look much better. It is kind of hard to tell with the lighting though but thanks for the update!

http://farm8.staticflickr.com/7168/6...232a6c5e_b.jpg

http://www.the370z.com/members/solis...icture-092.jpg

-sides need to be shorten to where it lines up with the rear valence.
-center section hangs too low.

Looks like a copy of Top Secret R34 diffuser that has the center trimmed out. The design doesn't fit the Z at all, much too squared off.

I personally think the z looks 10x better with no wheel gap..Most people agree but just don't do it because you have to be a little more cautious when driving...so what. It's defiantly worth it.
This would be on the ground with my "hellaflush" car :shakes head:. I like where it's going though..

is the new asia headquarter in taiwan? the plate looks like taiwan plate.

if its possible, can i get the address so i can go to the headquarter to check it out? thanks

Not bad but seems to be missing something. Needs more attention towards the edges and smoothed out in the center. Like what you see with other diffusers. Needs to come out to the edges.

looks pretty sick imo :tup: great work jay :D

It's funny that you posted that pic. There was one at my work yesterday and I was thinking how cool that would look.

I like the concept so far, but it doesnt seem to flow with the rear of the car....something on the end detail behind the rear wheels is where I get hung up.

I like it but I'm having problems with Evo r I ordered side skirts n I have yet to receive them or shipping info or any info at all I'm about to cancel my
Pay pal payment to them I called numerous times and no one answers and I left plenty of messages and noone returns my phone calls I'm very disappointed to say the least it's a shame to because I had a couple things I was goin to order but not anymore

jay is probably caught up with things man have you contacted him on the forum here?

Waizzz is actually a mod over at my350z, and hes handling a number of customer support issues with Jay. He may be the guy to talk to if you have a question for Jay, since Jay himself has such a hard time responding.

I like it, hopefully it fits around the GTHaus rear muffler which sits in approx the same exact spot as the OEM muffler.

I'm kind of digging it. I'm going to wait for Password JDM's diffuser to come out too before jumping the gun on anything tho.