Driveway paint job (satin black)

Solus

I can't remember lol it was almost 6 years ago. I promise you didn't run across me if you were down here because I never leave where I work and I am essentially in a vault all the time. Our MOS school is up there because EWTGLANT is there. I am a war planner there are only like 350 of us in the entire Corps

Cmike2780

Not really a big fan of the primer look.... and to do this to a $30k sports car takes some massive cajones. At the end of the day, its your car to do with as you wish.

I just don't see how I could personally justify spray painting a fairly new car to save a few bucks. If you can consider $30k cheap sports car, $3k for a wrap should be a drop in the bucket for you.... plus you could always take it off. You could have also wrapped it yourself.

I dunno. It may look better in person. Just my $0.02.

__________________

[09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R]

Florida_GATOR

Gotcha.

__________________
MK44 Creed- " Ive got a bullet here with your name on it, and im gonna keep firing till i find out which one it is "

Most badass job ever.

leighspped

__________________
Performance: Fast Intentions LTH + CBX + Injen CAI + UpRev + KW3 + Whiteline sway bars + short throw shifter + 34r oil cooler = 335whp + (OS Giken Clutch and Diff)
Interior : Recaro seat + Alpine HU and Rockford Fosgate Amp and Speakers + Passport 9500ci + JDM shift knob + LED's Forged avant garde m310's 19x9 19x12 RE-11

Solus

I see what you are getting at. Keep in mind this is Satin not Matte and doesn't look so primer-like. I did it cheap and love it and if need be and I want to sell it for some reason I can't forsee then I will pay to have a real paint job done on it and have it painted back to factory color and it's no big deal.

kenchan

or just mail your car to Mike and have it powdercoated.

Econ

looks good man, i like it.

i just don't know that krylon is gonna last very long. It lasted like 3 months on my door handles...

__________________
2014 Triumph Thruxton 900
2013 Fiat 500 Abarth
2009 Nissan 370z

akong51

One has to call to question the durabilty of "off the shelf" spraypaint on a car that battles the elements everyday. At any rate, a very ballsy project to take on and I think it looks great. Hope you don't have to touch up the whole car every 2 weeks!

Waiz

Ok, now that I'm not looking at the photos on my Iphone I can see the details a little clearer.

There are some areas that do not look uniform and will need to be repainted but overall not too shabby. The area next to your drivers door handle and the passenger fender area show some signs of uneven paint placement common with anything that is spray-painted.

edub370

i like the idea, but i know a buddy of mine that did the exact same thing to his black f150 tailgate. he wet sanded afterwards and everything and it looke pretty ok... at first... about 2 car washes later it looked like a spray painted tailgate..

__________________

schrack150

good job ...i like it

__________________
2009 370z PW Base + Sport 6M
13.86@104.4
ERZ HFC, Injen, AP Exhaust...wet black powdercoated Ray's....UPrev

scott982

That is exactly what happens. The only way a satin black paint job will hold up is by using a high quality automotive paint with flattening agent mixed in the clear.

Kingbaby

Hopefully the prep work was solid cause this can turn to *** in seconds....


props for doing it though!

__________________
07 Silver Alloy Nissan 350Z Nismo #0191 "Lin'da"
2amR--------------------> VQ I.N.C. - Like us!

1slow370

that satin clear is near $150 dollars a quart too which is why satin black is a "baller" color. also anybody ever tell you what happens when you spray a standered paint over Krylon if your thinking of redoing it before you sell it? It's called instant hammer finish, only use krylon if you never plan to use good paint again or are prepared to pay to have every sq.in. and seam sanded all the way down to bare and then puttied, self etched, filler primed, spot puttied, primed based and cleared (expensive as all hell). if you wanted satin black and had to do it yourself i would have invested $400 in a cheap compressor/dryer/filter/suction spray gun/$300 in some ok black, and clear, and enough satin clear for two coats(if you can find the two clears that will work together to save some $) and been out $1000 in better paint that will LAST. Satin is higher maintenance than matte so you may end up redoing it yearly anyway to keep it looking nice going the spray bomb route. Spray bombs are usually good for small things like door handles but in the future stay the F**k away from krylon pick a different brand of spray paint that will be more compatible like the sherwin williams automotive line custom mixed spray cans. For another hundred over what you spent you could have had much better paint with no worries of it reacting in the future to a multistage job, and with better resistance to the elements. Not hating just saying there are other low buck options that would yield even better results.

Also when i redid my friends bumber outside years ago, cost myself a lot of time when an effing piece of grass from his neighbors lawn landed on it.

Edit:Also THIS is constructive criticism, not trying to stop you from doing it, just giving you some info that will make it easier/better in the future

Also make sure you watch your temperatures when you apply certain paints/putties as some will not cure correctly if the temperature or humidity are outside of the manufacturers specs, or with direct sunlight. Be careful about the time of day and weather when you paint outside.

__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50

Solus

We used the same stuff to paint a 240 last summer and it is his daily driver and still looks fine. Granted it wasn't satin but still it's held up pretty well.

I guess we will see in the years to come. Like I said if it doesn't work out for me I will just shell out the cash to have it done "right".

Constructive criticism and tips don't bother or offend me. Thanks for taking the time/effort to type up this post.