NISMO Titanium Shift Knob installed!!!!

StealthZ · 03-23-2011, 10:42 AM

I loved this in my 350 and have yet to get it for the 370.

TheGreatOne · 03-23-2011, 12:46 PM

Looks great, I got one in black, cant wait to install it.

karotZ · 03-23-2011, 02:35 PM

Quote:

Originally Posted by FromG2Z

That rubber ring was supposed to be under the boot? I was reading the instructions, and I don't remember it stating that. But you may be right. Your pic is with a BnM Short Shift kit eh? I wonder if anyone can post a pic of their Nismo knob set up with ring under the boot. I guess it won't take me long to unscrew it and pop it on the bottom.

I didn't even know that the Nismo titanium knob came with two options? Or is it just a matter of one being older than the other? So do I have the "good" version then?

You have the better and more expensive version.

BalanBro · 03-23-2011, 06:50 PM

How are these on really hot days? I had a machined metal knob on my daily driver before, and for the first 5 minutes on a hot, sunny day, I screamed like a biatch every time I had to shift gears. I used to jump from 1st to 4th gear to minimize the pain.

3SeventyZ · 03-23-2011, 08:25 PM

Quote:

Originally Posted by BalanBro

How are these on really hot days? I had a machined metal knob on my daily driver before, and for the first 5 minutes on a hot, sunny day, I screamed like a biatch every time I had to shift gears. I used to jump from 1st to 4th gear to minimize the pain.

It gets pretty warm.

FromG2Z · 03-24-2011, 08:53 AM

Quote:

Originally Posted by TheGreatOne

Looks great, I got one in black, cant wait to install it.

Yeah I liked that look too, but I read(heard) that it may be a little "lighter" than the titanium? I may be wrong.

Quote:

Originally Posted by karotZ

You have the better and more expensive version.

sweeeet....

Quote:

Originally Posted by BalanBro

How are these on really hot days? I had a machined metal knob on my daily driver before, and for the first 5 minutes on a hot, sunny day, I screamed like a biatch every time I had to shift gears. I used to jump from 1st to 4th gear to minimize the pain.

I would imagine it would get pretty warm. I also keep a microfiber towel in the car for dusting the interior at stop lights so I could always throw that on top of the knob after I park

karotZ · 03-24-2011, 05:47 PM

Quote:

Originally Posted by BalanBro

How are these on really hot days? I had a machined metal knob on my daily driver before, and for the first 5 minutes on a hot, sunny day, I screamed like a biatch every time I had to shift gears. I used to jump from 1st to 4th gear to minimize the pain.

It gets mad hot on mine here in Cali since my car is sunbaked 24/7. What I'm about to do is go seek a tailor or something and make a custom black leather cover with red stitching to prevent it from getting super hot. It will pretty much be just an oblong cover with no close-ends.

Quote:

Originally Posted by FromG2Z

Yeah I liked that look too, but I read(heard) that it may be a little "lighter" than the titanium? I may be wrong.

They are lighter since it is made of aluminum.

FromG2Z · 03-27-2011, 07:29 PM

UPDATE: So I finally got to drive her around all week and weekend. Was trying to get a good feel of the shift knob. I must say, it gives the car a totally different feel. Throws seem shorter and crisper, therefore sportier. I love the joystick grip. The knob also looks so great in the interior.

On a side note, the shift patterns on the top of the knob (the one you adhere) are laser etched/engraved, correct? In other words, I won't have to worry about my thumb wearing out the pattern over time?

3SeventyZ · 03-27-2011, 08:17 PM

Quote:

Originally Posted by FromG2Z

UPDATE: So I finally got to drive her around all week and weekend. Was trying to get a good feel of the shift knob. I must say, it gives the car a totally different feel. Throws seem shorter and crisper, therefore sportier. I love the joystick grip. The knob also looks so great in the interior.

On a side note, the shift patterns on the top of the knob (the one you adhere) are laser etched/engraved, correct? In other words, I won't have to worry about my thumb wearing out the pattern over time?

the paint inside the etching wears away slightly after some use

FromG2Z · 03-27-2011, 10:49 PM

Quote:

Originally Posted by 3SeventyZ

the paint inside the etching wears away slightly after some use

crap. I shouldn't have removed the plastic cover then

ezowner · 03-27-2011, 11:19 PM

I've ordered mine tonight after reading your thread. thanks, fromg2z.

eddieconfetti · 03-28-2011, 06:08 PM

so the final answer about this titanium shift knob not getting that hot and is bearable to touch during the summer days is true or false.....

thats my only worry about getting aftermarket metal shiftknobs. i dont want to deal with burning my hand.

FromG2Z · 04-04-2011, 09:39 PM

Quote:

Originally Posted by ezowner

I've ordered mine tonight after reading your thread. thanks, fromg2z.

No problem man. Anything to help our community.

Quote:

Originally Posted by eddieconfetti

so the final answer about this titanium shift knob not getting that hot and is bearable to touch during the summer days is true or false.....

thats my only worry about getting aftermarket metal shiftknobs. i dont want to deal with burning my hand.

So far it hasn't gotten hot to the touch. If it does, I have several micro fibers that I can slip on there after I park... no biggie.

CATCHINZZZS · 04-16-2011, 07:51 PM

Looks Good still have mine in black, But damm cant get the stock one off PITA...Ive tried it all pressure pliers and all. sucks if i have to but those special pliers to use once..

karotZ · 04-16-2011, 09:48 PM

Quote:

Originally Posted by eddieconfetti

so the final answer about this titanium shift knob not getting that hot and is bearable to touch during the summer days is true or false.....

thats my only worry about getting aftermarket metal shiftknobs. i dont want to deal with burning my hand.

It gets really hot, no joke. Here in CA my car is parked outside 24/7 so it gets baked. One of these days I'm going to have a custom made leather with red stitching to cover it.

Quote:

Originally Posted by CATCHINZZZS

Looks Good still have mine in black, But damm cant get the stock one off PITA...Ive tried it all pressure pliers and all. sucks if i have to but those special pliers to use once..

If you dont mind destroying your stock knob, then go for it. Otherwise, it will frustrate you due to the amount of loctite Nissan has poured into it.

03-23-2011, 10:42 AM	#16 (permalink)
StealthZ Enthusiast Member Join Date: Jun 2009 Location: Virginia Posts: 356 Drives: '14 GTR Premium Rep Power: 16	I loved this in my 350 and have yet to get it for the 370. __________________ Past rides: '07 350Z San Marino blue, '09 370z Brilliant silver, '11 Evo X Phantom Black (felt like a brick but did anything) '13 BRZ Satin white (so much fun) now driving the dream.

03-23-2011, 12:46 PM	#17 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 46 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	Looks great, I got one in black, cant wait to install it. __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her)

03-23-2011, 06:50 PM	#19 (permalink)
BalanBro Enthusiast Member Join Date: Apr 2009 Location: NJ Posts: 318 Drives: 40th Anniv. 370Z Rep Power: 1111	How are these on really hot days? I had a machined metal knob on my daily driver before, and for the first 5 minutes on a hot, sunny day, I screamed like a biatch every time I had to shift gears. I used to jump from 1st to 4th gear to minimize the pain. __________________ 2012 Mercedes C63 AMG P31 Sedan, ROW, aFe, Eurocharged Dyno Tune. 438WHP/415WTQ 2010 SOLD: 40th Anniversary 370z

03-27-2011, 07:29 PM	#23 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 17	UPDATE: So I finally got to drive her around all week and weekend. Was trying to get a good feel of the shift knob. I must say, it gives the car a totally different feel. Throws seem shorter and crisper, therefore sportier. I love the joystick grip. The knob also looks so great in the interior. On a side note, the shift patterns on the top of the knob (the one you adhere) are laser etched/engraved, correct? In other words, I won't have to worry about my thumb wearing out the pattern over time? __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Titanium Shift Knob Open-O Design Installed	karotZ	40th Anniversary 370Z	22	03-04-2011 03:58 PM
FS: NISMO titanium shift knob	VancouverZ34	Parts for sale (Private Classifieds)	5	02-26-2011 08:43 AM
NISMO GT Titanium shift knob!	corner3garage	Body Interior/Exterior	4	01-16-2010 01:52 AM

03-27-2011, 11:19 PM	#26 (permalink)
ezowner Base Member Join Date: Dec 2009 Location: Ny Posts: 52 Drives: Fly Rep Power: 15	I've ordered mine tonight after reading your thread. thanks, fromg2z.

03-28-2011, 06:08 PM	#27 (permalink)
eddieconfetti A True Z Fanatic Join Date: Jun 2009 Location: Duluth, GA Posts: 3,334 Drives: A Totaled PW Z Rep Power: 22	so the final answer about this titanium shift knob not getting that hot and is bearable to touch during the summer days is true or false..... thats my only worry about getting aftermarket metal shiftknobs. i dont want to deal with burning my hand.

04-16-2011, 07:51 PM	#29 (permalink)
CATCHINZZZS Base Member Join Date: Jan 2011 Location: NYC Posts: 221 Drives: 2010 370Z Rep Power: 14	Looks Good still have mine in black, But damm cant get the stock one off PITA...Ive tried it all pressure pliers and all. sucks if i have to but those special pliers to use once..